see PDF attached Condition very good  ...

• more information

Tube Diameter (Min): 25 mm // Tube Diameter (Max): 50 mm ...

• more information

Automatic sheet to sheet Laminator DGM ETH1650  Manufacturer : DGM  Year of Installation : 2014  Year of Manufacturing : 2014  Format : 1650x1450  Description :  High Speed Automatic Sheet to Sheet Carton Laminating Machine  - Maximum paper size : 1650 x 1450 mm  - Minimum paper size : 380 x 380 mm  - Top Sheet : 180-350 gm/m2  - Corrugated Board: E,F,B,C,A & up to 5 layers  - Carton Board: min 250 gm/m2  - Speed : 5000 s/h  - Line speed: 130m/min  - Dimensions: 14.5 x 2.6 x 2.7 m  - Weight: 8.5 ton  - Power Consumption: 15.7 kW

Line for packing cut sheets Sheet packing system for a sheet metal cross-cutting unit. The packaging system cooperated with the sheet cross-cutting line. Basic parameters: Supported species: steel, aluminum Material thickness 0.4-4 [mm] Material width: Min. 500 [mm] Max. 1500 [mm] : Packing system prepared to pack material only on pallets or cross beams Maximum weight 5,000 [kg] 1 table Minimum and maximum sheet length: 500-7000 [mm] Width range: 500-1500 [mm] Maximum system speed 40 Automatic transport of parcels from the stacker to the packaging system Total length of the system is approximately 35 m We have a video recording of the operation of the entire packaging sys ...

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mi ...

Steel construction with trapezoidal sheet metal Dimensions: 9.84 x 19.96 m Location: near Cologne  ...

• more information

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station  ...

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by s ...