Fabbricante:
(Categoria: 103)
automatic:Werkzeugspannung Spannk.15000 Ntotal power requirement:63 KVAweight of the machine ca.:56000 kgtable-size:22000 x 800 mmTool bore:ISO 50, DIN 69871 AD x-travel:20500 mmy-travel:1600 mmz-travel:1000 mmdimensions of the machine ca.:24 x 6 x 4 mtool piece magazine with:30 Plätze
x-travel:600 mmy-travel:500 mmz-travel:450 mmweight of the machine ca.:3,5 t
x-travel:550 mmy-travel:300 mmz-travel:425 mmCNC-control:Sinumerik table-size:950 x 350 mmmax. table load:500 kgspindle taper ISO:30 spindle turning speed range:20 - 10500 U/minspindle drive motor:5,5 kWtool change unit:12 Pos. coolant:inkl. voltage:380 Vtool adaptor:Steilkegel 40 groove width:32/28 mmno. of flutes:3 rapid speed:40.000 mm/mintotal power requirement:15 kVAweight of the machine ca.:3,3 tchip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mmDocuments:vorhanden - Serial Number: 186 - 78- Control: FANUC O-M- with various tool holders- coolant equipment
x-travel:500 mmy-travel:400 mmz-travel:330 mmtable-size:710 x 410 mmspindle taper ISO:40 quill stroke:100 mmcontrol:HEIDENHAIN TNC 335 B table load:180 kgno. of flutes:8 groove width:14/25 mmtool taper:SK 40 speeds::20 - 3000 U/minfeeds:infinitely variable1-1250 mm/minrapid traverse:5000 mm/mintotal power requirement:13 kWweight of the machine ca.:2500 kgdimensions of the machine ca.:2000 x 2800 x 2300 mmYear:ca. 1984 Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel
x-travel:800 mmy-travel:250 mmz-travel:350 mmtable-size:1130 x 250 mmno. of flutes:4 groove width:14/25 mmtaper MK:4 spindle turning speed range:56 - 2800 U/mintotal power requirement:9,5 kWweight of the machine ca.:2009 kgdimensions of the machine ca.:1400 x 1700 x 2800 mmDocuments:vorhanden
x-travel:1190 mmtotal power requirement:25 kWfeeds::3 - 2000 mm/minweight of the machine ca.:4,3 ttable-size:1600 x 400, 5 Spannbacken mmdimensions of the machine ca.:4000 x 3600 x 2200 mmspeeds:45 - 1800 U/miny-travel:530 mmz-travel:540 mmtool taper:ISO 50 control cabinet:940 kg
x-travel:700 mmy-travel:450 mmz-travel:500 mmtotal power requirement:23,4 kWweight of the machine ca.:3100 kgdimensions of the machine ca.:3200 x 4000 x 2500 mmtool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/Uspindle speeds::20 - 3150 , direkt programmierbar /minfeed range:1 - 3000, in B=0,01 - 3 U/minrapid traverse in x-y-z axis:6m/ min, B = 7,6 U/minwork table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432
x-travel:100 mmy-travel:100 mmz-travel:100 mmtotal power requirement:0,6 kWweight of the machine ca.:130 kgdimensions of the machine ca.:1600 x 1000 x 1300 mmmilling depth:0-50 mm
x-travel:630 mmy-travel:200 mmz-travel:360 mmtotal power requirement:7,5 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:1500 x 1800 x 1900 mmspindle taper:SK40 table-size:250 x 1100 mm
x-travel:500 mmy-travel:400 mmz-travel:330 mmtable-size:400 x 710 mmspindle taper ISO:40 quill stroke:100 mmcontrol:HEIDENHAIN TNC 335 table load:180 kgno. of flutes:8 groove width:14/45 mmtool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/minfeeds:infinitely variable1-1250 mm/minrapid traverse:5000 mm/mintotal power requirement:13 kWweight of the machine ca.:2500 kgdimensions of the machine ca.:2000 x 2800 x 2300 mmDocuments:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel
x-travel:850 mmy-travel:280 mmz-travel:355 mmtotal power requirement:8 kWweight of the machine ca.:4 tdimensions of the machine ca.:2 x 2 x2.40 mrevolutions per minute: 28-1.400 U/mintable-size:1.200 x 370 mmsurface area:1.060 x 260 mmspindle taper:SK 50
x-travel:560 mmy-travel:500 mmz-travel:450 mmtotal power requirement:16,5 kVAweight of the machine ca.:2700 kgdimensions of the machine ca.:2,30 x 3,0 x 1,90 mcontrol:Grundig quill stroke:80 mmtool taper:SK 40 spindle speeds::40..4000 1/minfeed:2 .3600 mm/minrapid traverse:4000 mm/minDocuments:vorhanden
x-travel:1120 mmy-travel:345 mmz-travel:400 mmtotal power requirement:14,5 kWweight of the machine ca.:3,85 tdimensions of the machine ca.:3.500 x 2.920 x 2.710 mmtable-size:1600 x 400 mmspindle taper:SK 50
total power requirement:2,4 kWweight of the machine ca.:1150 kgdimensions of the machine ca.:1550 x 1615 x 1630 mmtable clamping surface LxW:315 x 710 mmmax. tool weight:200 kgT - slots distance:63 mmT - slots - width:12 mmtaper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/minfeed speeds:11,2 -355 mm/minDocuments:vorhanden
x-travel:600 mmy-travel:400 mmz-travel:380 mmtotal power requirement:6 kWweight of the machine ca.:1700 tdimensions of the machine ca.:1800 x 2130 x 1980 mmTable dimensions:400 x 800 mmT-slots:7 St.,14 x50 table load:300 kgspindle:SK40 turning speed range:63-250 U/minspeed steps work spindle:18 spindle speeds::50- 2500 n/minfeeds:10-500 mn/minDocuments:vorhanden
x-travel:500 mmy-travel:400 mmz-travel:340 mmwork table::800 x 400 mmcontrol:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/mintotal power requirement:14 kWweight of the machine ca.:2400 kgdimensions of the machine ca.:2100 x 1800 x 2400 mm
x-travel:600 mmy-travel:500 mmz-travel:400 mmspindle diameter:90 mmspindle turning speed range:45 - 2000 U/mintable length:1250 mmtable width:200 mmgroove width:14 mmtable rotating:45 °total power requirement:4,2 kWweight of the machine ca.:2000 kgdimensions of the machine ca.:2000 x 1800 x 1550 mmYear:ca.1957 Documents:vorhanden
: gebraucht : 2005 : 4541 : prompt, Zwischenverkauf v : China : 5700 €: 1 : 40 - 1.300 U/min: ISO 30 : 465 x 230 x 380 mm: 1000 x 280 mm: 2.2 kW: 1400 mm: 1300 mm: 2200 mm: 1120 kg: 90 °: 115 - 1.750 (115, 230,290 U/minMilling head rotatable and swivellable +/- 90° with manual quill 120 mm travel rangeSpindle sleeve feed takes place via a turnstile or with the fine feed by means of a handwheelSpindle head 350 mm manually traversableMax. drilling capacity 30 mmManual tool clamping vertical/horizontal by means of tightening screwAutomatic feed in X Axis,(8) 12 - 370 mm/minCoolant unitChip trayLighting1x Collet chuck set1 Stk Drill chuck with mounting4 Milling cutter holdersDoes not comply with the German UVV &, Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 700 x 270 mmtaper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/minturning speed range - horizontal: 8. 110 - 1230 U/minfeeds: 8: 25 - 285 mm/minweight: 900 kgquill stroke: 60 mmtotal power requirement: 3,7 kWrange L-W-H: 1,3 x 1,38 x 1,65 mCondition: ready for operation: Video available on our website.: CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mmSlotting head: Hub 80 mmUniversal tool milling machine 3-axis-digital read out and swivelingvertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machin ...
: neu : ca. 4 Monate ab Auftragse : Taiwan : 48000 €: 916.8 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidway ...
Cambiatore attrezzo a 40 volte, Fuso raffreddato internamente 10.000 giri/min, Misurazione degli utensili e dei componenti Bluhm, scaglie di vetro, Incluso il programma CAM Auction-ID: A1-46315-1
Frenatura DETA Simplex; Condizioni originali con alimentazione e rapidità su tutti e 3 gli assi; adatto alla lavorazione dei metalli di precisione; Tensione: 380 volt ; Velocità: 30–1190 giri/min; Dimensione del tavolo: 1300 x 300 mm ; Registrazione: ISO 30 ; Pompa di raffreddamento: sì; Auction-ID: A1-45170-25
Fresatrice Gromatic X6130; in condizioni originali con alimentazione e rotazione rapida su tutti e 3 gli assi; adatto alla lavorazione dei metalli di precisione; Tensione: 380 volt ; Velocità: 30–1200 giri/min; Dimensione del tavolo: 1120 x 300 mm ; Fessura a T: 14 mm ; Auction-ID: A1-45170-26
Specifiche Tecniche Corsa longitudinale: 4000 mm Corsa verticale: 1250 mm Corsa slittone: 1000 mm Avanzamenti rapidi: L-T-V 16 - 15 - 15 m/min Dimensioni tavola: 5000 x 1000 mm Altezza tavola dal filo pavimento: 1100 mm Giri massimi mandrino: 3000 rpm; 28 kW; ISO 50 Testa: Birotativa manuale Magazzino utensili tipo random: 20 Posizioni Controllo: SELCA S3045 Cambio gamma: 2 Velocità Accesori: Volantino remotato ; Evacuatore trucioli Note: Testa su ram TUH 10LT Articolo venduto in stato non verificato Auction-ID: A1-44614-4
Scorrimento X: 450 mmY - Viaggio: 350 mmz - Viaggio: 400 mm Testa di fresatura rotabile +/-: 90 Rastrellazione del mandrino: SK40 velocità di rotazione del mandrino - senza passi: 10-5000 U/peso minimo della macchina ca.: 2 tdimensioni della macchina ca.: 2,5 x 2,1 x 2,1 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
travel -x axis: 3.000 mmtravel -y axis: 1.500 mmtravel -z axis: 2.000 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 0 - 6.000 U/minwith NC rotary table: 1.600 x 1.400 mmworkpiece weight: 12.000 kgnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with integrated NC-rotary table , ITC (20 bar), radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: RT30 | RT 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 8.000 mmtravel -y axis: 2.600 mmtravel -z axis: 1.500 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 20 - 5.000 U/minnumbers of positions in the tool changer: 60 tool taper: SK50 clamping plate: 10.000 x 2.500 mmCNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: FP8000 | FP 8000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 2.500 mmtravel -y axis: 1.000 mmtravel -z axis: 1.250 mmcontrol: HEIDENHAIN - TNC 530 turning speed range: 20 - 4.000 U/minwith NC rotary table: 1.000 x 1.000 table surface area: 2.700 x 850 mmnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: A25A | TA-25 A | TA 25 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
25.000 € 
