KLINGELNBERG macchina utilizzata in vendita

Generatore di ingranaggi conici a spirale Klingelnberg AFK 201, AFK203

Klingelnberg PFS600 Tester per ingranaggi

Klingelnberg S-35 Macchina da taglio per ingranaggi CNC a 10 assi CONTROLLO CNC A 10 ASSI ADATTO PER INGRANAGGI CONICI A SPIRALE E IPOIDI DI MEDIE E GRANDI DIMENSIONI 23,6 pollici DIAMETRO MASSIMO DEL PEZZO PROGETTATO AD ALTA AFFIDABILITÀ E PRECISIONE OPERAZIONI DI INDICIZZAZIONE CONTINUA E SINGOLA INDICAZIONI: DIAMETRO MASSIMO DEL PEZZO 23,6 pollici (600 mm) MODULO NORMALE PIÙ PICCOLO 0,137 pollici MODULO NORMALE PIÙ GRANDE 0,393 pollici LARGHEZZA MASSIMA DEL DENTE 3,93 pollici RAPPORTO DI TRASMISSIONE PIÙ PICCOLO 1:1 RAPPORTO DI TRASMISSIONE PIÙ GRANDE 1:10 ANGOLO DI SPIRALE (GRADI) 0-60 MANDRINO DELLA TESTA DI TAGLIO: OERLIKON CONO CORTO 1:4 0-5,118 pollici VELOCITÀ MANDRINO (VAR. INF.) 30-350 MINUTI-1 INCLINAZIONE DEL MANDRINO (GRADI) 0-35 ECCENTRICITÀ 0-10,82 pollici RAGGIO DELLA TESTA DI TAGLIO 3,46 pollici-7,12 pollici MANDRINO PORTAPEZZO CO ...

KLINGELNBERG PFS 600 Macchina di prova per ingranaggi Diametro ingranaggi 15-600 mm Larghezza ingranaggi 160 mm Gamma di moduli 0,5-15 Corsa del tastatore 165 mm Altezza tra le punte 50-650 mm Max. Lunghezza del pezzo 665 mm Angolo elica 0-90 Peso max. del pezzo 300 kg

GEAR HOB TESTER Make: KLINGELNBERG Model: PWF 250 Max. Diameter: 250 mm Min Module: 2,5 mm Max Module: 20 mm Distance between centers: 470 mm Weight: 1500 mm

Taglierina di circolazione di Klingelberg

Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.

Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories.

Workpiece diameter: 10-350mm, max. grinding length: 660mm, clamping length: 1055mm, max. module: 25mm, swivel angle: +/-60°, grinding wheel dimensions: 300-500x100mm, with Faudi cooling lubricant belt filter and Elbaron oil mist separator.

Max. workpiece diameter: 10-350mm, max. grinding length: 600mm, clamping length: 1055mm, swivel angle: +/-60°, with oil mist filtration, an inspection is possible.

A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro massimo della ruota: 540 mm velocità di rotazione: 315 - 1260 U/min regolazione dell'asse +/-: 50 mm rapporto: 1 : 1 bis 1 : 10 cono MK: peso della macchina ca.: 2,3 t dimensioni della macchina ca.: 1,7 x 2,1 x 1,5 m

diametro massimo della ruota: --- mm larghezza ingranaggio: --- mm modulo massimo: --- modulo minimo: --- Controllo: --- potenza totale richiesta: --- kW peso della macchina ca.: --- t dimensioni della macchina ca.: --- m

diametro max. ruota: 0-200 mmmodulo max.: 25 min. modulo: 0,5

Diametro: 400 mm Klingelnberg - AFK 151 Tagliatrice a spirale conica 400 x Mod 6 MACH - ID 6237 Marca: Klingelnberg Tipo: AFK 151 Anno di costruzione: 1960 Diametro   massimo 400  Modu    l6 mm Dimensioni Lunghezza    3.000 mm Larghezza      2.200 mm Altezza     2.000 mm Peso     6.900 kg

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro esterno: 113 mm diametro in mm: 32 mm largheggia: 130 mm

diametro esterno: 118 mm diametro in mm: 40 mm larghe larghe: 157 mm

external diameter: 112 mm bore diameter in mm: 32 mm width: 130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro esterno: 106 mm diametro in mm: 32 mm largheggia: 108 mm

diametro esterno: 88 mm diametro in mm: 27 mm largheggia: 91 mm

diametro esterno: 111 mm diametro in mm: 32 mm largheggia: 130 mm

diametro esterno: 108 mm diametro in mm: 32 mm larghezze: 140 mm

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 1 min. module: 10 total power requirement: 12 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total ele ...

diametro esterno: 128 mm diametro in mm: 40 mm largheggia: 130 mm

diametro esterno: 103 mm diametro in mm: 32 mm largheggia: 108 mm

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...