saldatrici usati in vendita (1,706)

Linee di saldatura per reti metalliche EVG LGR usate per la produzione di reti per recinzioni e reti industriali Larghezza della maglia: min 500 mm e max. 2.150 mm Lunghezza della maglia: min 600 mm e max. 3.000 mm Separazione del filo trasversale: min. 12,5 mm e poi in continuo Separazione del filo di linea: min. 25 mm e poi in continuo Campo di lavoro: min. 2,0 mm e max. 6,0 mm No. Numero di fili di linea: 52 pz Velocità di produzione: 150 cw/ min potenza installata al 50%ED: 840 kVA Altezza di impilamento: max. 600 mm

Tipo di macchina: saldatrice Produttore: Kemppi Tipo: Kempotig 4500 / Kempotig 50 / Raffreddatore WU10 Anno di costruzione: sconosciuto Condizione: usato L'offerta verrà inviata solo se viene fornita un'impronta completa! Prezzo 1.190 Euro incl. 19% IVA Ubicazione Warstein , Germania Riferimento M-KEM-0425 DESCRIZIONE Vi offriamo una saldatrice usata del produttore Kemppi. Saldatrice ad elettrodo e saldatrice Tig. incl. interruttore a pedale Disponibile ora La nostra offerta si rivolge ai commercianti registrati ai sensi della legge sulla regolamentazione del commercio ai sensi del §14 GewO. L'offerta è soggetta a modifiche, con riserva di vendita anticipata. Si prega di fornire i propri dati di contatto completi per ricevere un preventivo con i nostri termini e condizioni di pagamento. Gli errori nelle descrizioni e nelle offerte sono riservati!

weight max.: 15 / 30 (einzeln/Set) tworkpiece diameter: 600 - 6000 mmgear diameter: 520 mmRotating speeds: 130-1300 mm/minvoltage: 400 Vtotal power requirement: 2 x 1,1 kWweight of the machine ca.: 1200 kg + 800 kg kgdimensions of the machine ca.: mmSerial No. 2953Drive and idle unit equipped with rail rollers(can be dismantled if not required)Units are not from same original set and differ in height.Height floor - center of turning rolls 670/750 mm(Idle unit / drive unit)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

peso max.: 15/30 tdiametro del pezzo: 600 - mmdiametro dell'ingranaggio: 520 mmvelocità di tornitura passo dell'ingranaggio di azionamento: U/minpotenza totale richiesta: 2 x 1,1 kWpeso della macchina ca.: 2300 kgdimensioni della macchina ca.: mm

current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1,55 tYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indicazioni: - Capacità di carico massima 5000 kg - Diametro massimo di serraggio 1800 mm - Dimensioni piastra frontale 1200 x 1200 mm - Movimento rotatorio elettr. Infinitamente variabile - Destra + Sinistra – Corri - E. - Telecomando - Trasmissione della corrente di saldatura ca. Il 650 - Azionamento 400 V / 2,2 kW - Ingombro ca. L 1500 x A 1650 x P 1300 mm - Peso ca. 2500 kg

corrente di saldatura: max. 70 Acapacità di taglio: max. 25 mmmm tensione a circuito aperto: 120 VPressione dell'aria richiesta: min. 4 barcarico collegato: 9,2 kWfrequenza di carico collegato: 400 Vpeso: 0,28 kgDimensioni (LxPxA): 1,7 x 1,0 x 1,2 mm

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,73 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 840 - 890 mmweight of the machine ca.: 0,3 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,0 x 1,0 x 0,9 mProduct description- High quality steel S355J2+N + plasma nitriding- Material thickness approx. 17 – 19 mm- Bore Ø 22 mm- Holes surface 100x100 mm grid- Rounded corners, edges and holes- Height of side panel 150 mm- Hole spacing in side cheeks 50 mm- Including scaling on the surface- Construction reinforced with ribs- Grid lines enable precise setups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corrente di saldatura: 10 - 200 Afrequenza di carico collegata: 230 Vpeso: 16 kgDimensioni (LxPxA): 600 x 300 x 400 mmSaldatrice TIG, la consegna include- Morsetto di terra 300 A con cavo di saldatura da 1,5 metri- Portaelettrodo all'italiana 200 A con cavo di saldatura da 2 metri- Cinghia di trasporto

lunghezza: 0 mmaltezza: 0 mmpotenza totale richiesta: kWpeso della macchina ca.: 0,8 tdimensioni della macchina ca.: mSaldatrice ad ultrasuoni per articoli in plastica

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2+N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17 - 19.0 mm.The holes have a diameter of 22 mm.Hole arrangement in a 100 mm grid on the table top,Side panels 150mm with parallel hole arrangement in a 50mm grid.Incl. basic foot equipment. Table height 850mmPrice plus packaging and transport.Other dimensions available.The accessories shown are not included in the scope of delivery.Optionally available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet. 4: 110 pieces 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 30 x 160511Magnetic bolt 8 x 280740Stop: 10 x 280410.NStop: 10 x 280420.NStop: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 3 tswivelling range: 0 - 135 Gradturning speeds: 0,07- 0,7 U/mintable height adjustment: von 980 bis 1750 mmmax. torque on the faceplate: 4500 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,02 - 0,2 U/minheight adjustment: 1450 - 2200 mmmax. torque on the faceplate: 20000 Nmengine output: 1,5 / 2,0 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 4 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 8000 Nm0: 1,1 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 400 mmtable width: 400 mmtable load: 0,2 ttable diameter: 400 mmswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 100 kg. vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,065 tdimensions of the machine ca.: 0,56 x 0,42 x 0,46 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 20000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 3,0 + 4,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 3000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1200 - 1800 mmmax. torque on the faceplate: 6000 Nmengine output: 1,1 / 1,1 kWwelding current: 700 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 8 tswivelling range: 0 - 130 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1210 bis 2238 mmmax. torque on the faceplate: 1200 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mmheight: 67,5 mmdaylight: 65 mmexternal diameter: Futter 200 mmexternal diameter: Spannhebel 360 mmweight: 4 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

peso max.: 1000 Kgdiametro del pezzo: 20 - 800 mmdiametro del tamburo: 200 x 50 mmavanzamento: 50 - 2000 mm/minpeso: 65 kgpotenza totale richiesta: 0,6 kWdimensioni della macchina ca.: 0,8 x 0,6 x 0,6 mblocco a rulli- Treppiede torcia- Velocità infinitamente variabile- interruttore a pedale- Manuale utente in inglese

welding current: 5 - 160 Aconnected load frequency: 230 Vweight: 7,9 kgDimensions (LxWxH): 310 x 140 x 230 mmESAB inverter TIG welding machine Rogue ET 180i CE TIG DCAn excellent high-frequency TIG ignition ensures afaultless welding start, as well as even and stablearc properties.Easy to use - setting up the welding parameters issimple and intuitive.Robust design IP23S housing for applications inproduction plants and on construction sites.Comprehensive TIG functions for optimal process control forevery application and a pulse function of up to 500Hz tocontrol the ideal heat input.A PFC module ensures a stable arc andinsensitivity to mains fluctuations - even when working withlong extension cables of up to 100 meters (PRO version only).Optionally, the welding current can be set from the TIG torch, foot pedal orhand-held remote control.technical data:Primary voltage, 1-phase 230 VAC ±15% ...

corrente di saldatura: max. 200 Atensione a circuito aperto: 14 - 24 Vfrequenza di carico collegata: 230 Vpeso: 25 kgDimensioni (LxPxA): 500 x 200 x 300 mmAttrezzatura: pacchettodi tubi flessibili Cavodi terra Ugelli di saldatura

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,26 tdimensions: 1,2 x 0,8 x 0,85 mSpecial offer ! Siegmund workstation incl. 2 drawers + tool set Bhigh quality steel S355J2 + N, plasma nitrided and BAR-coatedBoreholes Ø 22 mm, boreholes surface 100x100 mm gridMaterial thickness approx. 17 - 19 mmConsisting of:1x 004002 (Siegmund Workstation)1x 224004.P (perforated plate)1x 224030 (clamp holder)1x 004020 (shelf)1x 224035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)4x 220610.1 (clamp)8x 220511 (double quick release bolts without groove)6x 220410.N (stop)2x 220110.N (angle)1x 220852 (Allen key)1x 004303 (vice)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro della tavola: 1000 mmcarico della tavola: 1200 Kgcampo di rotazione: 0 - 135 Velocità di tornitura graduata: 0,1 - 1,0 U/mincoppia massima sul frontalino: 900 Nmcorrente di saldatura: 500 Amperepotenza totale richiesta: 0,75 + 0,75 kWpeso della macchina ca.: 0,8 tTavola rotante inclinabile per saldatura - Telecomando - 2 x trasmissione della corrente di saldatura

table length: 1300 mmtable width: 800 mmtable height: 920 - 1000 mm: 1000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 230 Vweight of the machine ca.: 0,55 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 550 mmtable load: 500 Kgswivelling range: 135 Gradtilt adjustment: manually/mechanicall: motorisch turning speeds: max. 5 U/min stufenlostable load capacity: 250 kg. vertikaltotal power requirement: 0,8 kWweight of the machine ca.: 245 Kgdimensions of the machine ca.: 820 x 730 x 710 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.