saldatrici usati in vendita (1,601)

number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 900 mmtable load: 2000 Kgweight of the machine ca.: 0,24 tdimensions: 1,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 10000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,5 + 3,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/min: 900 Nmtotal power requirement: 0,37 / 0,37 kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mmtable load: 1500 Kgswivelling range: 0 - 105 Gradturning speeds: 0,15 - 1 U/minheight adjustment: 672 - 1180 mmhollow spindle diameter: mmwelding current: 500 Amperemax. torque on the faceplate: 3000 Nmtotal power requirement: 0,75 kWdimensions of the machine ca.: 1560x1120x750 mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The dat ...

table length: 2900 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,9 tdimensions: 2,9 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corrente di saldatura: 30 - 200 Afrequenza di carico collegata: 230 Vpeso: 3,6 kgDimensioni (LxPxA): 290 x 135 x 2600 mmFornitura: saldatrice TIG Buddy TIG 160Elettrodo e cavo di terra 3mtorcia TIG ET 17 4mTubo del gas con dado a risvolto

corrente di saldatura: 15 - 40 Acapacità di taglio: 1 - 16 mmtensione a circuito aperto: 96 VPressione dell'aria richiesta: min. 4 barcarico collegato: 3,6 kWfrequenza di carico collegato: 230 Vpeso: 9,0 kgDimensioni (LxPxA): 371 x 153 x 232 mmMacchina da esposizione Taglierina al plasma inverter con accessori:Torcia da taglio con cavo da 4 m, morsetto di messa a terra con cavo da 2,5 m, manometrodell'aria, maschera e spazzola.

numero: 24 Peso posizionale: 22 kgcondizione: neu 0Set base 1 / 24 pezziper piano del tavolo spessore 15 e 25 mm4 morsetti, altezza di serraggio 300 mm, proiezionevariabile 8 bulloni diserraggio 2 pezzi arresto 100 mm4 pezzi arresto 150 mm2 pezzi arresto 225 mm1 pezzo portatorcia1 pezzo spazzola perforata 30 mm1 pezzo Lozione separante 500 ml1 pz. Detergente per tavoli di saldatura su base naturale e biologica 500ml

peso max.: 1000 Kgdiametro del pezzo: 20 - 800 mmdiametro del tamburo: 200 x 50 mmavanzamento: 80 - 1600 mm/minpotenza totale richiesta: 0,23 kWdimensioni della macchina ca.: 2 Stk. 0,45x039x0,33 m

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

È disponibile un dispositivo di saldatura a ultrasuoni Branson. Frequenza: 20kHz, potenza: 900W, corsa: 100mm, forza di serraggio a 690kPa: 1.96kN, rilascio dinamico: 67N-734N. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

È disponibile una cella di saldatura Akon con robot Kuka e 2 fonti di saldatura Dinse. 1) Robot di saldatura: Kuka KR 6 R900, carico utile: 6 kg, raggio d'azione: 900 mm, controllo: KR C4 Compact, carico della flangia: 25 kg, peso totale: circa 170 kg. 2) Cella di saldatura automatica Akon Robotics con piattaforma girevole e sistema di controllo Kuka. 3) Generatore di saldatura Dinse Dix PI 900. Il motore EP per il 4° asse è stato sostituito nel 2023. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

È disponibile una macchina da taglio laser CNC CO2 Amada con sistema di stoccaggio automatizzato LKI. 1) Potenza laser: 4kW (4000W), corsa X/Y/Z: 3100mm/1550mm/100mm, carico massimo della tavola: 920kg, spessore massimo del materiale acciaio/acciaio inossidabile/alluminio: 20mm/12mm/10mm, dimensioni del sistema laser X/Y/Z: circa 10000mm/4300mm/2100mm, peso: circa 11000kg. 2) Pallet: 8, pallet di taglio: 2, materia prima: 2/3, scarico: 4/3, altezza massima di scarico: 2200 mm, dimensioni massime del materiale X/Y: 3050 mm/1525 mm, dimensioni minime del foglio: 2000 mm/1000 mm, altezza: 5400 mm. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

Corsa X/Y/Z: 2520 mm/1550 mm/300 mm, dimensioni massime del foglio X/Y: 5040 mm/1550 mm, spessore massimo del materiale acciaio dolce/acciaio inossidabile/alluminio: 12 mm/6 mm/3 mm, peso massimo del pezzo: 330 kg, velocità di posizionamento: 80 m/min/80 m/min/60 mm/min, precisione di posizionamento: +/- 0,01 mm. Dimensioni della macchina X/Y/Z: circa 5650 mm/3650 mm/2100 mm, peso: circa 6600 kg, ore di funzionamento: 29499 ore. Compreso il modello laser Fanuc C1500. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

Carico: 335 mm: 3000 kg, 450 mm: 2400 kg, 660 mm: 1900 kg, 825 mm: 1600 kg, 1110 mm: 1200 kg, diametro massimo di tornitura a 90: 1600 mm, velocità: 1,2 giri/min, tempo di inclinazione a 135: 30 s, cambio: Boehringer Sturm, tipo di cambio: 2DA 11 cambio a olio. È possibile effettuare un'ispezione in loco.

Capacità di carico: 25t, distanza del baricentro: 700mm, eccentricità: 250mm, velocità: 0,66 giri/min, intervallo di inclinazione: 0-130, tempo di inclinazione: 120s, altezza del tavolo (piatto): 1930 mm, altezza dell'asse di rotazione: 1600 mm, diametro del tavolo: 2500 mm, potenza del motore inclinazione/rotazione: 7,5 kW/4,5 kW, lunghezza totale: 3000 mm, larghezza totale: 2500 mm. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

È disponibile un sistema di aspirazione dei fumi di saldatura PlymoVent. Volume del serbatoio dell'aria compressa: 11l, qualità dell'aria compressa: classe 6, pressione di esercizio: 4bar-5bar, consumo di aria compressa per impulso: 40nl-50nl. Documentazione disponibile. È possibile effettuare un'ispezione in loco.

È disponibile un sistema laser con 1 stazione di carico e due stazioni ciascuno. Dispositivi di saldatura: 4, potenza laser: 3,3kW, sorgente del raggio: laser a disco TruDisk 3302, dimensioni del pezzo X/Y/Z: 300mm/100mm/100mm, spessore del materiale: 1,5mm, velocità di saldatura: 5600mm/min, ottica di saldatura: Trumpf BEO D70, ore di funzionamento: circa 70000h. Documentazione disponibile. È possibile effettuare un'ispezione in loco.