Modello
(Fabbricante: HBM)
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 8 bar Effective free air delivery: 235/165 L/min Receiver capacity: 50 / 10 l / bar weight of the machine ca.: 37,5 kg. Number of cylinders: 2 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 790 x 400 x 730 mm This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 730 x 210 mm connected load frequency: 400 V boring feeds:: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg
rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
larghezza delle strisce: 100 mm lunghezza della fascia: 610 mm piano di lavoro: 170x125 / 265x150 mm : 16 mm velocità di tornitura: 2000 U/min diametro del rotolo: 16, 23, 29, 41 e 53 mm potenza totale richiesta: 0,45 kW peso della macchina ca.: 114 Kg dimensioni della macchina ca.: 0,6 x 0,5 x 0,5 m
diametro: 200 mm altezza: 105/265 mm altezza del centro: 105 mm peso della macchina ca.: 41 kg dimensioni della macchina ca.: 400 x 330 x 310 m
larghezza delle strisce: 150 mm lunghezza della fascia: 1220 mm dimensioni della mola: 225 mm piano di lavoro: 150 x 400 mm Tavolo inclinabile fino a: 90 Superficie del tavolo graduato : 150 x 130 mm frequenza di carico collegato: 230 V potenza totale richiesta: 0,75 kW peso della macchina ca.: 35 Kg dimensioni della macchina ca.: 650 x 360 x 400 millimetri
larghezza delle strisce: 75 mm lunghezza del nastro: 2000 mm velocità del nastro: 30 m/sec potenza totale richiesta: 3 kW peso della macchina ca.: 70 t dimensioni della macchina ca.: 1,2 x 0,5 x 0,75 m Levigatrice a nastro con - Disco di contatto: 600 x 75 mm
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4 from 4 - 14mm, 3/8 from 6 - 22mm and Torx from E10 - E20, 1/2 from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro della lama della sega: 80 - 700 mm motore della testa del mandrino del pezzo: 0,25 kW diametro della mola: 125 mm velocità di tornitura: 2850 U/min campo di rettifica: -20 bis +20 Peso graduato della macchina ca.: 12 Kg dimensioni della macchina ca.: 700 x 400 x 300 m
larghezza della lamiera: 1020 mm spessore della lastra: 2,5 mm distanza tra le colonne: 1050 mm apertura della luce diurna: mm: 135 potenza totale richiesta: Handbetrieben kW peso della macchina ca.: 0,32 t dimensioni della macchina ca.: 1,4 x 0,6 x 1,3 m Piegatrice a segmenti Larghezze dei segmenti: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 e 260 mm.
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: automatic feed Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
corrente di saldatura: 30 - 200 A frequenza di carico collegata: 230 V peso: 3,6 kg Dimensioni (LxPxA): 290 x 135 x 2600 mm Fornitura: saldatrice TIG Buddy TIG 160 Elettrodo e cavo di terra 3m torcia TIG ET 17 4m Tubo del gas con dado a risvolto
spessore della ganascia: 125 mm campo di serraggio: 220 mm altezza di serraggio: 46 mm forza di serraggio max.: 4500 Kg peso: 42 kg dimensioni: 670x185x120 mm Morsa idraulica per macchina
corrente di saldatura: 15 - 40 A capacità di taglio: 1 - 16 mm tensione a circuito aperto: 96 V Pressione dell'aria richiesta: min. 4 bar carico collegato: 3,6 kW frequenza di carico collegato: 230 V peso: 9,0 kg Dimensioni (LxPxA): 371 x 153 x 232 mm Macchina da esposizione Taglierina al plasma inverter con accessori: Torcia da taglio con cavo da 4 m, morsetto di messa a terra con cavo da 2,5 m, manometro dell'aria, maschera e spazzola.
larghezza della lamiera: 915 mm spessore della lastra: 1,0 mm distanza tra le colonne: 920 mm apertura della luce diurna: mm : 135 potenza totale richiesta: Handbetrieben peso della macchina ca.: 96 Kg dimensioni della macchina ca.: 1170 x 400 x 480 m Piegatrice a segmenti Larghezze dei segmenti: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 e 260 mm.
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 225 mm dimensions of saw-band: 2480 x 27 x 0,9 mm table height: 935 mm cutting speed: 45 + 90 m/min : 225 mm : 145 mm : 90 mm : 150 x 245 mm : 190 x 150 mm capacity 60 degrees: flat: 120 x 90 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With an output of 1100 watts, the device is ideal for processing hard types of metal. - Thanks to the emergency stop and automatic switch-off, you can work safely - The low-noise electric motor ensures a quiet working atmosphere - Comfortable buttons guarantee pleasant operation of the device. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro: 150 mm altezza: 80 mm altezza centrale: 105 mm peso della macchina ca.: 18 kg dimensioni della macchina ca.: 300 x 80 x 200 m
0: 199,5 x 67,5 x 64 mm Pressione di esercizio: 2,5 - 8,0 bar Consumo d'aria a 6 bar: 350 l/min Peso della macchina ca.: 0,23 t dimensioni: 2,10 x 1,30 x 0,88 m Cabina di granigliatura Duo 10 fogli in PET per proteggere le finestre 10 fogli in PET per proteggere l'illuminazione fluorescente 2 pedali 2 pistole a getto 6 inserti per ugelli in ceramica (diametro 6 mm)
table length: 1600 mm table width: 800 mm stroke height: 900 mm : 310 mm weight max. in kg: 500 kg weight of the machine ca.: 0,16 t : 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
larghezza delle strisce: 100 mm lunghezza della banda: 915 mm dimensioni della mola: 200 x 32 mm diametro del foro della mola: 30 mm potenza totale richiesta: 0,9 kW peso della macchina ca.: 35 Kg dimensioni della macchina ca.: 620 x 540 x 300 mm
diametro della mola: 250 mm frequenza di carico collegata: 230 V : 90 - 180 U/min peso della macchina ca.: 18 Kg dimensioni: 470 x 300 x 440 m Dispositivo di affilatura dei coltelli con velocità variabile Mola 250 x 50 x 12 mm, grana 220 Disco in pelle 200 x 30 x 12 mm
