Fabbricante:
(Categoria: 108)
Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg
clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD A3-100, HSD P3-100, P3-100, 1- 4.5 bar -Diameter: 19mm -Length: 45mm -Number: 21 pieces available -Total Cost -Total weight: 0.5kg
Welding fume filter, welding fume extraction, soldering fume extraction -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm -Weight: 192 kg
Plasma hose package, welding torch, MIG / MAG torch, hand bend torch, gouging tool, gouging nozzle, cutting nozzle-Harris: AGN cutting nozzle-Cutting range: 100-200 mm-Pressure: 5.0 - 6.0 bar-Price: per piece-Quantity: 3 pieces-Minimum purchase: complete-Dimensions: 90/20/H20 mm-Weight: 0.1 kg/piece
: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MIG/MAG hose package for robots-Hose package with: wire feed for robots or automatic welding machines-Length: 3.4 m-Water cooled-Weight: 5.5 kg
clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding machine, welding carriage, inert gas welding device, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding device, Rail Runner, welding tractor -Burning cutting head of a: Burning system copying system -Feed: adjustable -Dimensions: 460/210/230mm -Weight: 7.6kg
wire electrode, welding wire, welding wire -Eurotrode: Carbo 2002 -Diameter: 1.00mm -Price: per roll -Number: 3 rolls available -Dimension: O 300/100 mm -Weight per roll: 15 kg
Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor-Esta: Small dust extractor OM-8-Drive: 0.37 kW-Extraction arm: 3400 mm-Dimensions: 500/1330/H1550 mm-Weight: 76 kg
table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Standard base for welding table, table base, table base for welding tableWelding and assembly tables-Manufacturer: Demmeler, standard foot for welding table 2 pieces-Type: 3-D-Pendulum feet: finely adjustable-Mounting countersunk screw: M24-Price/Delivery: complete-Total dimensions: Ø 90 / 635 mm-Weight: 8.1 kg/piece
MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,2 m -Weight: 3,0 kg
table length: 1200 mmtable width: 800 mmtable height: 800-975 mmtable load capacity: 250 Kgweight of the machine ca.: 150 Kgdimensions: 1,2 x 0,8 x 0,85 mSpecial price!Siegmund workbenchincluding accessory set 4 clamps, 8 bolts and 8 angles (2-WS161208.1)- Table box with 3 drawers (2-BX000990.1)- Tool holder (2-TH161208)Perforated plate made of high-quality steel S355J2+N + plasma nitriding- 16 mm bore- Surface holes in 50x50 mm grid- Material thickness approx. 12 mm- Height-adjustable feet for working height in the range of 800 to 975 mm- Frame made of aluminum profilesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MIG/MAG hose package, MIG/MAG welding torch-MIG/MAG hose package: water-cooled-Number: 2x hose package available-Price: per piece-Length: 6.3 m-Weight: 5.4 kg
MIG/MAG hose package, MIG/MAG welding torch-MIG/MAG hose package: gas-cooled-Length: 4,1 m-Weight: 2 kg
MIG/MAG hose package, MIG/MAG welding torch-MIG/MAG hose package: air-cooled-Length: 3.22 m-Weight: 3.2 kg
MIG/MAG hose package for robots-Hose package with: wire feed for robots or automatic welding machines-Length: 2.5 m-Water cooled-Number: 2x wire feeders available-Price: per piece-Weight: 5.5 kg
Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -started role -Weight: 3kg
table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding chassis, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding machine, rail runner, welding tractor -Flame cutting machine one: burning system -Equipment: On/Off switch, without control and potentiometer -Motor: 180V/30W -Dimensions: 580/370/H280 mm -Weight: 17.5kg
Spot welder, spot welder, spot welder, spot welder-Stationary-Operation by hand switch-Arm length welding machine: 350 mm-Welding gun type:-Control-Dimensions machine: 1500/1000/H1670 mm-Weight machine: 774 kg-Dimensions control cabinet: 1550/420/H1960 mm-Weight control cabinet: 330 kg
wire electrode, SG2 welding wire, welding wire -Böhler: EMK 6 D -AWS. ER70S-6 -Wire thickness: 0.8 mm -Price: per piece -Quantity: 2 pieces -Weight: 15 kg
Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -Number: 2 rolls available -Price: per roll -Weight: 16.1 kg
Earth cable for inert gas device, electrode device-Length: 2 m-Dinse connector-With: gas hose-Weight: 5 kg
MIG/MAG hose package extension, intermediate hose package -Length: 5 m -Dinse plug -With: gas hose -Weight: 11 kg
table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WMT GmbH & Co. KG
