macchine distributrici di bevande usati in vendita (2,069)

Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder VT 3010

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible

Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated  ...

Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of del ...

Overview This labeling machine, type: Novexx Solutions ALS 206 was built in 2012 and ws used for carton-labeling. With this solution, labels with a width of from 10 – 156 mm (material width incl. carrier material max. 160 mm) on the side of products become. The surface of the product must be flat in order to ensure uniform label application. It Paper and rigid PE label materials can be used become. The maximum dispensing speed is 30 m/min. The tripod with the vertical and horizontal Adjustable spindle allows flexible integration into a Assembly line system. The product sensor must be connected to the M12 connector of the ALS. Top labeler and bottom labeler printing unit with infeed and outfeed belt. Upper unit model ALS 206, subunit ALX 924/5. Can be supplied with computer and label machine for cardboard labels. Incl. tripod. The subway labeller was new 2 years ago. It is an overhoult ...

Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  Capacity: 100 L/h evaporation capacity at +22/+24 °C Application: Concentration of musts, juices, and liquid products Operating modes: Recirculation mode or direct concentration mode Max. concentration: 55–70 °Brix Daily output: 2,400 L evaporated / 24,000 L enriched to 10% Utilities: Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE Water: +12/+18 °C (low consumption) Compressed air: 6–8 bar Connections: DN40 DIN, 50 mm hoses Control system: PLC automation, IP65 control cabinet, d ...

winding NW 65More then 300 machines new and second hand on our seema .de

working direction: left-rightMore then 300 machines new and second hand on our seema .de

Karton Etikettierung HERMA DSMore then 300 machines new and second hand on our seema .de

Vollkastenkontrollanlage SYSCONAUnicept 4 VKKcapacity / hour ca.: 4000More then 300 machines new and second hand on our seema .de

electrical control cabinetMore then 300 machines new and second hand on our seema .de

Consists of control cabinetNo. 1- 1-3No. 2 - 4-6No. 3 - 7More then 300 machines new and second hand on our seema .de

up to 30.000 litresNW 65Number available: 6 pcs.More then 300 machines new and second hand on our seema .de

con un'altezza adesiva di 200 mm Direzione di corsa: sinistra - destra Controllo in frequenza

Macchina soffiatrice KRONES Contiform S 8 Anno di produzione: 2003 Capacità: 14.000 BPH Dimensione del collo: PCO 28 - 1881 Dimensione della bottiglia: 1,5 litri. Bottiglia in PET inclusa unità di raffreddamento inclusi il sistema di alimentazione pre-forma inclusi contenitori preform inclusi dispositivi di inclinazione delle preforme È disponibile un sistema di nastro trasportatore d'aria immediatamente disponibile in Germania La macchina è in buone condizioni.

Direzione di corsa: sinistra - destra con rivestimento di sicurezza Capacità: 1.500 - 7.000 bph inclusa la pompa per colla Condizioni ottimali

Linea di riempimento asettica in PET Sidel Ci sono 2 capacità: 18.000 litri per ora e 27.000 litri. / h - a seconda delle dimensioni delle bottiglie Capacità: 36.000 BPH per 0,5 litri e 0,4 litri 18.000 bph per 1,5 litro. Anno di produzione: 2006 - 2025 La linea Aseptic produce prodotti asettici ed è attiva dal 2006. Tutte le attività di manutenzione sono state effettuate due volte all'anno secondo le specifiche OEM e con parti OEM originali da tecnici di assistenza OEM. La linea comprende un'area di lavorazione (miscelatore, pastorizzatore e vaso asettico), piattaforma APA (soluzione per la sterilizzazione delle bottiglie e tappi PET), riempitivo, moduli CIP per la lavorazione e il riempimento, 4 telecamere, ispettore di bottiglie complete (360 gradi), tavolo di accumulo, macchine per etichettare (roll on e sleever), impacchettatrice, palletizzatore e involucro stretchi ...

Overview This Mondial LD 8-1 EAGLE/C atmospheric monoblock filling machine was manufactured by Italian manufacturer CIMEC in 2016. It is suitable for filling non-carbonated beverages such as beer with bottle fermentation, lemonade or soda and combines an 8-valve filling station with a single crown capping head. The filler is available immediately. Technical details  Output: 1,800 bottles/h Filling system: Atmospheric Application: Beer with bottle fermentation, still drinks Formats: Longneck 33cl Bottle diameter: 60 mm Bottle height: 227 mm Cap type: Crown cork 26 mm Output: 5 kW Compressed air requirement: 7 bar Dimensions (L×W×H): 165 × 140 × 240 cm

Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected

Overview The following 2 component mixer was built in 2000 by the German manufacturer Krones. The machine is available immediately in its current good condition.  Technical data  capacity 45,000L/h 2 components  Anton Paar densimeter  suitable for carbonated drinks year of manufacture: 2000 SIEMENS control

Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction

Overview  This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting  Easy cleaning with Easy Clean Paint 

Overview  This can filling and seaming machine was manufactured in 2013 by CFT. The system consists of a CFT Mastercan Tronic RS 40/6 filler combined with a CFT Seamer 3000/6 and a lid feeder from CIMA. The machine is designed for beer filling in aluminium cans. The machine is currently in operation and will remain in operation until mid July 2026. Technical data  Capacity: up to 20,000 cans/hour Formats: 0.33 l / 0.5 l aluminium cans Application: Beer filling Configuration: Can filler RS 40/6 with seamer 3000/6, lid feeder Lid type: 202 Scope of Delivery  Can filler | CFT | Mastercan Tronic RS 40/6 | 2013 | Filling for aluminium cans Can seamer | CFT | 3000/6 | 2013 | Integrated can seaming unit Lid feeder | CIMA | - | 2013 | Lid feeding system  

Overview This shrink-wrapper was manufactured in 2013 by the Italian company OCME S.p.A.. The Vega HT 60/2 SE is a versatile film packer designed for wrapping PET, glass, or can containers into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a running line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides for square bottles and an optional bottle divider. A semi-automatic roll-lifting robot for film roll changes is also included. Optional outfeed conveyors can be provided on request. Technical data  Formats: From 0.25 L to 2.5 L; currently 1.5 L in 2×(3×2) packs Container types: PET, glass, and cans Application: All beverages and liquid products Machine configuration ...

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle format ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Overview  This capsule machine was manufactured by CIRIO GERMANO in 2014. The machine has 6 heads and is designed for processing thermal shrink capsules. Technical details  Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Serial number: 14-018 Number of heads: 6 Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking