sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 706)
Overview This tray packer was manufactured in 2020 by the Italian manufacturer Robopac. The machine was serviced every year, last maintenance was in November 2025. It´s equipped for the packing of cartons. Technical data Type: Dimac Laser TX Year of manufacture: 2020 Total output: 20 cycles/min Adjusted for the following formation: 2x1 3x1 4x1 Adjusted for the following carton sizes: 88 x 177 x 245 mm
Overview The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored. Technical Details Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...
Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data Filling points: 2 Filling valve diameter: mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry
Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...
Overview This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production, handling up to 42,000 bottles per hour in 0.33 L contour bottle format. It includes all necessary components from depalletizing to final palletizing and labelling, making it a complete turnkey system for bottling operations. The line underwent annual maintenance in August 2025 and was stopped on September 1st, 2025. It remains installed and connected, and can be inspected upon request. Technical data Capacity: 42,000 bph Formats: 0.33 L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line length: Approx. 103 × 29 m Condition: Excellent; maintained until shutdown (September 2025) Availability: Immediate Status: Still installed and connected S ...
Overview This automatic self-adhesive labelling monoblock was manufactured in 2021 by the Italian company ENOS. The ENOS S5000 is designed for high-precision labelling of bottles and cans using pressure-sensitive (self-adhesive) labels and is suitable for producers requiring up to 5,000 bph. The machine is stored in good condition and immediately available. Technical data Capacity: Up to 5,000 bph (single label) Formats: Glass bottles & cans; various diameters adjustable with included accessories Dimensions: 2,850 × 1,500 × 2,000 mm Weight: 450 kg Labelling type: Self-adhesive (pressure-sensitive) Label positions: Front, back, neck (up to 3 stations) Power supply: 2 kW Transport: Motorized infeed & outfeed tables Controls: Standard electronic speed variator; optional touchscreen Scope of Delivery Automatic self-adhesive labelling monoblock Up to 3 labelling stations (fron ...
Overview The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty. Technical data Capacity 12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm 14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles Easy format changeover due to quick-change system without tools Siemens S7 control system Bottle loading system with hopper 1000 l, in stainless stee ...
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data: manufacturer: Krones, Germany model: Contiroll HS 810-720 year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine, production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC
Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data Application: Beer and other carbonated beverages Capacity: 6,000 bph Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring Bowl Diameter: 960 mm Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating Hours: ...
Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate inf ...
Overview This rinsing–filling–corking triblock was manufactured in 2008 by Spanish company GyM (model Bacchus 12–16–1). It integrates bottle rinsing, atmospheric filling and corking in a compact system suitable for medium-speed wine bottling. Technical data Capacity: 2,500–2,800 bph Formats: Includes 2 bottle format adapters: Cava & Burgundy Magnum, Nova, Stylis & Ryn Rinsing heads: 12 Filling heads: 16 (atmospheric filling) Corking heads: 1 Power supply: Voltage: 380 V Frequency: 50 Hz Consumption: 4 kW Operating pressure: 3–6 bar
Overview This case packer was manufactured in 2020 by German company Mühlbauer. The machine is in excellent condition, has been well maintained, and is immediately available for sale due to discontinuation of use. It is ready for immediate operation and suited for various bottle and crate formats. Technical data Capacity: 8,000 bottles/hour Formats: 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle module crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle module crate 0.33 l Vichy bottle / 24-bottle module crate Machine condition: Very well maintained, ready to use Scope of Delivery Bottle packer Mühlbauer Satelite EP-0400-T
Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Technical Details Capacity Depend on layer formation Equipped for the handling of: KEG´s Modul crates
Overview This automatic steam generator was manufactured in 2018 by German company Certuss. The Junior TC-300 is a gas-powered instant steam generator designed for reliable and efficient steam production. With fast startup capability and high efficiency, it is well-suited for breweries and beverage production plants. The equipment is available immediately and comes with essential accessories, including a water treatment plant and control components. Technical data Capacity: 300 kg/h Pressure: up to 10 bar Power: 218 kW Efficiency: 91% Heating: Gas-powered Startup time: max. 5 minutes Control: PLC
Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data: manufacturer: ENOS, Italy model: Eticap year of manufacture: 2008 labelling Heads: 2 (wet-glue heads) Head 1: front and neck labels Head 2: back labels operation Direction: Left to right production Capacity: 4.000/h adjusted for: cylindrical glass bottles 0,7 L = Ø75mm 1,0 L = Ø86mm condition: Stored off-line since 2020, machine in a good condition actual label sizes: front label: 131mm height, 77mm width back ...
Overview This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data Brewhouse System – Inox GC (1,500 L) Capacity per batch: 1,500 L Vessels: HLT, mash/lauter tun, kettle/whirlpool Material: AISI 304 stainless steel Heating: Compatible with automatic gas burner Includes: Temperature control panel, integrated pumps Isothermal Mash & Whirlpool Tun (2,000 L) Capacity: 2,000 L Insulation: 50 mm rock wool Features: Hinged lids, agitator with VFD, CIP system, PT100 probe Isothermal Lauter Tun (2,500 L) Capacity: 2,500 L Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic ...
Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last used for beer filling. Technical details Filling principle: Atmospheric Output: 800-1,000 bottles/hour Bottle format: 330ml Capper: 26mm crown cap
Overview This shrink-wrapper was manufactured in 2009 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data year of manufacture: 2009 capacity 60/min adjusted formats: 1,5L PET (2x(3x2)) operation: film only application: water, beer, CSD condition: very good, still connected Additional information best-by date coding bottle available (Videojet Excel 170i Ultra High Speed) conveyor for packages available
Overview This high-pressure air compressor was manufactured in 1999 by the Belgian company Atelier François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and connected, has been regularly maintained, with the last maintenance carried out in August 2025, and is immediately available for inspection or sale. Technical data Operating Pressure: 40 bar Air Capacity: 2,100 Nm³/h Application: PET bottle blowing Condition: Still connected, operational Last maintenance: August 2025 Availability: Immediate
Overview This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction
Overview This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Technical data Capacity: 20 HL/hour Application: Beer Configuration: Automated, HMI-controlled
Overview This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data Fermentation tanks - 200hl (3 units): Capacity: 20,000 L Diameter: 2,500 mm Cylindrical height: 4,000 mm Type: Atmospheric with cooling jackets Storage tanks - 150hl (3 units): Capacity: 15,000 L Diameter: 2,500 mm Cylindrical height: 3,000 mm Type: Atmospheric Storage tanks - 100hl (3 units): Capacity: 10,000 L Diameter: 2,000 mm Cylindrical height: 3,000 ...
Overview This isobaric glass bottle filler was manufactured in 1986–87 by German company Krones and commissioned in 1988. It is a Krones Mecafill VK2V K126-308 with 96 filling valves and 18 capper heads for crown cork closures. The filler has been continuously upgraded with new technology, including a Siemens S7-300 control system (2009) and a retrofitted Krones capper (2004). It is suitable for beer, cider, soft drinks, cocktails, lemonade, carbonated and still water. The machine is still in production (can be seen on the video) and will be dismantled by the end of September 2025. Spare parts from the warehouse are included. Technical data Capacity: 30,000 bph (all formats) Formats: 0.275 L, 0.33 L, 0.5 L (total 9 formats) Filling valves: 96 Capping heads: 18 Closure type: Crown cork Direction: Clockwise (L–R) Diameter: 2,880 mm Filling system: Isobaric, with double evacuation, ...
Overview This brewhouse was manufactured in 2011 by the German company Rabek Engineering GmbH. The system features a three-vessel configuration, a bi-zone steam heating system and is fully automatic. The line includes a 415 kW gas-fired steam generator, which is part of the scope of delivery. The brewhouse remains installed and under power, in excellent working condition, and is immediately available. Technical data Capacity: 35 hL per batch Configuration: 3 vessels (mash tun, lauter tun, kettle/whirlpool) Heating system: Steam, bi-zone Operation: Fully automatic control system Steam generator: Gas-fired, 415 kW included Condition: Installed, under power, excellent working condition Availability: Immediate
Overview This level & cap inspection machine was manufactured in 2012 by German company HEUFT. The SPECTRUM is designed for quality control of filled bottles, inspecting fill level and closure. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. Technical data Capacity: Up to 43,000 bph Formats: 330 ml Application: Level & cap inspection on filled bottles Flow direction: Left to right Operating hours: 48,121 h
Overview This rotary vacuum capping machine was manufactured in 2023 by Alwid (Germany). The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off closures on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately. Technical data Capacity: approx. 1,000–1,400 jars/h Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off closures Working direction: Right to left Working height: Adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control: Siemens S7 HMI (German) Construction: V2A stainless steel base, drip tray, capping head unit, CE-compliant safety guarding with Makrolon panels and safety doors Scope of De ...
Overview The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition. Technical details Capacity: max. 30,000 l/h beverage 6-component mixer Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm Flow meter Dosing pump Vacuum degassing Brix measurement CO2 measurement CO2 pressure control Conductivity measurement Electrical data Operating voltage 400V/230 V 50 Hz Control voltage 42V AC
Overview This model 4300 DE-ST9 sleeve labeling machine was manufactured by FUJI SEAL EUROPE B.V. in 2009. Photos and an operational video are available, as well as the general layout of the line. Technical details Manufacturer: FUJI SEAL EUROPE B.V. Model: 4300 DE-ST9 Year of manufacture: 2009 Last format: 0.25 liter
Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt
Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available. Technical details Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) Format parts: 5x centering plates for 0.7l GDB 5x centering plates for 0.75 Gastro 3x centering plates for 0.5l GDB/0.5l Euro Crate conveyor speed: 0.6 m/s Crate guide: All crates are moved lengthwise through the machine Noise level: 83 dB(A) Space requirement (LxW): 4,100 x 1,260 mm Working area: min. 1,500 mm on the operating side Hydraulics: Working pressure 150 bar, residual pressure 35 bar Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½ Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 Contro ...
BEVMAQ GmbH
