sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 103)
x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmControl: Heidenhain TNC 124 turning speed range - spindle: 50 - 4.000 U/mintransmission ratio: 2 drive capacity - spindle motor: 6 kWtension force: 10 kNswivellable: manuell +/-45 °max. tool diameter: 125 mmmax. tool weight: 6 kgtable surface area: 400 x 800 mmT-slots: 5x14x80 max. table load: 400 kgfeed speeds: X/Y: 0 - 6.000 mm/minfeed speeds: Z: 0 - 4.000 mm/minrapid traverse: X/Y: 6 m/minrapid traverse: Z: 4 m/mintotal power requirement: 11 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,9 x 3,5 x 2,0 mIncludes:Heidenhain TNC124 point-to-point controlElectrical documentation availableCoolant system2 work lightsMachine viseVarious tool holdersVarious SK40 toolsEnclosure with 2 sliding doors available, pictures to followThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mmy-travel: 300 mmz-travel: 400 mmCNC-control: DIALOG 11 spindle taper ISO: 40 spindle turning speed range: 31 - 5.000 U/mintable-size: 620 x 390 mmtable load: 250 kgpower capacity: 5,5 kWfeeds -stepless-: 2 - 6.000 mm/minquill stroke: 80 mmcoolant: voltage: 380 Vtotal power requirement: 11,0 kVAweight of the machine ca.: 1,65 tdimensions of the machine ca.: 1,85 x 1,90 x 1,80 melectric cabinet: 1,35 x 0,70 x 1,70 m- Serial-No.: 2836-0175- control: DIALOG 11- electrical hand wheel- horizontal milling spindle- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-viaggio: mmy-viaggio: mmz-viaggio: mmm-viaggio: mmRequisiti totali di potenza: kWpeso della macchina ca.: spazio necessario: m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Viaggio X: 710 mmY - Escursa: 250 mmZ - Viaggio: 400 mm - Dimensione tavolo: 1200 x 300 mm Controllo: Konventionell Adattatore utensile: SK40 Intervallo di velocità di rotazione: 50 - 2500 U/corsa minquill: mm Potenza totale richiesta: 2,2 kWweight della macchina ca.: 1,7 tDimensioni: 2,1 x 2,0 x 1,6 mCaratteristiche: - Display digitale - Sistema di raffreddamento - Testa fresatrice Huron - Dispositivo di arresto d'emergenza - Documentazione I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-axis: 5060 mmy-axis: 3200 mmz-axis: 1000 mmdistance between columns: 2700 mmspindle motor: 22/26 kWspindle turning speed range: 6000 U/minrapid traverse: 15 m/mintable-size: 5000 x 2400 mmworkpiece weight: 18 tControl: FANUC 31i-MB total power requirement: - kWweight of the machine ca.: 45 tdimensions of the machine ca.: 12,6 x 6,5 x 4,15 m- CNC Control FANUC 31i-MB- Tool Changer 32-fold (BT 50)- 3 axes linear scales- Semi-auto universal head (C axis auto 5 degree indexing)- Extension head- Spindle oil cooler- Air conditioner for electrical cabinet- Hydraulic oil cooler- no coolant thru spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Scorrimento X: 500 mmY - Scorrimento: 200 mmz - Corsa: 400 mm Superficie del tavolo: 700 x 300 mm Scala utensile: SK 40 - S20 Alimentazione: 8 - 400 mm/ Traversata minrata: in X und Z 1200 mm / velocità di virata: 40 - 2000 U/minimo Potenza totale: 2,2 kWweight della macchina ca.: 1400 kg Dimensioni della macchina ca.: 1500 x 1200 x 1600 mm Include display digitale a 2 assi Heidenhain I dati per questo spot sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-axis: 6.800 mmy-axis: 4.000 mmz-axis: 1.500 mmControl: iTNC 530 HSCI Heidenhaindistance between columns: max. 5.090 mmdistance spindle center to table: 1.825 mmMain spindle:: type: 175149A-0007 turning speed range - main spindle: max. 19.800 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A63 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °Main spindle:: type: 178099-0005 turning speed range - main spindle: max. 10.020 min/-1power capacity - main spindel: 20 kWmax. Torque: - Nmtool taper: HSK-A100 swivellable: B: +115° / -115 °rotatable: C: +/- 200 °work table:: table surface area: 6.000 x 3.000 mmmax. table load: 50,0 theight over floor: 100 mmnumber of T-slots: 12 T-slot - width: 28H12 mmT-slot - distance: 250 mmTool-Presetter:: number of toolpositions: 62 (38+24) pos.number of toolpositions: HSK A63: 37+1 pos.number of toolpositions: HSK A1 ...
X-corsa: 560 mmy-corsa: 300 mmz-corsa: 420 mm-dimensione della tavola: 1055 x 240 mm, conico del mandrino: ISO: Sk 40 intervallo di velocità di rotazione del perno: 40 - 1550 U/minquill: mmPotenza totale richiesta: 5,5 kWweight della macchina ca.: 1,3 t-dimensioni: 1,6 x 1,5 x 1,85 mFrenatura universale- Display digitale- Protezione dei chips- Sistema di raffreddamento- Luce macchina - vassoio per chip. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
max. wheel diameter: 620 mmgear width: 90 mmmax. module: 12 min. module: - no. of teeth: 6 - 100 pivoting angle: 0 - 90 Gradspindle taper: metr. 100 milling head speed: 28 - 56 U/minconnected load: 18 kVAControl: total power requirement: 14 kWweight of the machine ca.: 12 t2020 Retrofit with new control/electrical system)- CNC control NTC (Fanuc) (German/English)- electric handwheel- new motors/ electrics- various change wheels- chip conveyor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 525 mmz-travel: 500 mmtable surface area: 1000 x 543 mmspindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/minfeed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z axis: 18 / 18 / 15 m/mintable load: max. 350 kgcontrol: HEIDENHAIN MillPlus milling-head swivable +/-: 90 °total power requirement: 26 kVAweight of the machine ca.: 4,2 tdimensions of machine L x W x H: 2,95 x 2,1 x 2,26 mAccessories: various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
corsa: 820/850 mmy-corsa: 300/330 mmz - corsa: 485/505 mm, peso della macchina ca: 1,8 t, dimensioni della macchina circa: 1670 x 1620 x 2500 m. Ulteriori dettagli tecnici, si prega di considerare le immagini. I dati per questa pubblicità sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-travel: 400 mmy-travel: 400 mmz-travel: 300 mmrapid traverse: 1,2 m/minfeed range: 5 - 500 mm/mincreep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mmtable - universal: ca. 620 x 320 mmtable vertical adjustable: 350 mmweight of the machine ca.: 1200 kgdimensions: mmMachine was used in a public facility and is in good condition.Machine can be viewed under power by prior appointmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1900x1250x1750 mmweight: 600 kgtotal power requirement: 6,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x1250x1750 mmtotal power requirement: 6,5 kwweight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x1100x1500 mmWeight: 300 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 940x1250x1400 mmWeight: 250 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 980x860x1380 mmWeight: 165 kgTotal power requirement: 0,75 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2500x2100x1800 mmWeight: 1700 kgTotal power requirement: 7,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x2000x1950 mmWeight: 700 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2700x900x1900 mmWeight: 800 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-corsa: 400 mmy-corsa: 350 mmz-corsa: 400 mmgamma di velocità di tornitura: 1 - 4000 U/mincono mandrino ISO: 40 superficie della tavola: 650 350 mmControllo: Heidenhain TNC 124 potenza totale richiesta: 3 kWpeso della macchina ca.: 1,2 tdimensioni della macchina ca.: 2 2 2 mAttrezzatura: volantino elettronico Armadio portautensili I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-corsa: 500 mmy-corsa: 350 mmz-corsa: 375 mmgamma di velocità di tornitura: 63 - 4000 U/mincono mandrino ISO: 40 superficie della tavola: 800 360 mmpotenza totale richiesta: 3 kWpeso della macchina ca.: 1,2 tdimensioni della macchina ca.: 2 2 2 mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-corsa: 400 mmy-corsa: 320 mmz-corsa: 450 mmcontrollo: Haidenhain TNC 124 azionamento del mandrino principale: 3 kWnumero di velocità del mandrino: 63-3150 u/mincono utensile: SK 40 corsa del cannotto verticale: 60 mmvelocità di avanzamento: 5-2000 mm/mintraslazione rapida: 2 m/mintavolo di lavoro:: 800x320 mmrefrigerante: 20 l/minpotenza totale richiesta: 5 kWpeso della macchina ca.: 1,7 tdimensioni della macchina ca.: 2,2x2,4x1,6 mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-travel: 10000 mmy-travel: 3000 mmz-travel: 1500 mmControl: Heidenhain TNC 430CA milling head -swivable: 360.000 posspindle turning speed range: 10 - 3000 U/minTools changer: 40 pos.feed: 5000 mm/minRapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/minspindle motor: 37 kWtotal power requirement: 80 kVAweight of the machine ca.: 40 tdimensions of the machine ca.: mTraveling column milling and boring machine- Control Heidenhain TNC 430CA & HR 410- autom. Tool changer with 40 places (SK 50)- Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor- OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independentFAGOR CNC ControlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 410 mmy-travel: 310 mmz-travel: 400 mmtable-size: 700 x 280 mmcontrol: Heidenhain TNC 145tool adaptor: SK40 turning speed range: 40- 2.000 U/minrapid speed: 1,5 m/minfeed speeds: 1500 mm/minpower requirement: 2.2 kWquill stroke: 63 mmweight: 1,3 ttotal power requirement: 2,2 kWweight of the machine ca.: 1,5 tdimensions: 1,4 x 2,1 x 2,0 mFeatures:- New TFT screen- Coolant system- Hydraulic tool clamping- Milling head with spindle sleeve- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 6500/13150 mmy-travel: 4000 mmz-travel: 1250 mmw-travel: 2250 mmcontrol: Sinumerik 840 D table surface area: 5500/12150 x 3000 mmdistance between columns: 3500 mmmax. distance between table and spindle-nose: 3000 mmmax. workpiece weight: 70000 / 105000 kgram head dimension: 480 x 510 mmspindle turning speed - stepless: 6,3 - 4000 U/minmilling spindle motor: 63 kWmax. torque on the spindle: 3300 Nmtool taper: DIN 39871 AD ISO 50 feed speeds: X/Y/Z= 24000 mm/mintotal power requirement: 120 kVAweight of the machine ca.: 245 tdimensions of the machine ca.: 29 x 7,7 x 8,1 mThe Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro!Equipment/accessories:- automatic tool magazine for 153 tools- automatic milling head magazine for 6 milling heads- machining modules/ milling heads: 1. machining module -straight - straight long - ...
