Fabbricante:
(Categoria: 101)
capacità del foro nell'acciaio (diametro): 28 mmgola: 200 mm corsa del foro: 105 mmsuperficie del tavolo: 360x340 mmdistanza mandrino/tavola max.: 540 mmgamma di velocità di tornitura - continua: 120-3000 U/minpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...
x-travel: 1800 mmy-travel: 520 mmz-travel: 520 mmcontrol: iTNC 426-M spindle speed:: 8000 UpMrapid travel x/y/z: 30 m/mintool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nmweight of the machine ca.: tdimensions of the machine ca.: mMachine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Solid drill diameter: / mmbore depth: / mmnumber of spindles: / Froriep CNC deep hole drilling machine – the prefabrication specialistYear of manufacture: 2006Control system: Siemens Sinumerik 840DMax. drilling depth: 8,850 mmWorkpiece diameter: 150 – 900 mmSpeed range: 1 – 300 rpmFeed rate: 0.5 – 4,500 mm/minDrive power: 129 kWSwing diameter over bed: 1,000 mmClamping diameter faceplate: 900 mmWeight: approx. 47,000 kgIdeal for precise pre-drilling of deep holes – including faceplate, steering ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Solid drill diameter: / mmbore depth: / mmnumber of spindles: / 2-machine package: Froriep deep hole drilling machine & Irle finishing machinePerfectly matched duo for deep hole drilling and precise finishing of large workpiecesA specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency.MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialistYear of manufacture: 2006Control system: Siemens Sinumerik 840DMax. drilling depth: 8,850 mmWorkpiece diameter: 150 – 900 mmSpeed range: 1 – 300 rpmFeed rate: 0.5 – 4,500 mm/minDrive power: 129 kWSwing diameter over bed: 1,000 mmClamping diameter faceplate: 900 mmWeight: approx. 47,000 kgIdeal for precise pre-drilling of deep holes – including faceplate, steering ringMACHINE 2Irle machin ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 34700 €: 662.77 €: 50 mm: MK 5 : 350 - 1.600 mm: 56 - 1.450 (12) U/min: Stahl/Guß: M40/M50 : 2670 mm: 1120 mm: 2410 mm: 3300 kg: 465 - 1.420 mm: 0,06 - 0,2 (3) mm/min: 3.7 kW: 320 mm: 270 mm: 2.550 x 970 x 200 mm: 1,5 kW: 630 x 500 x 500 mm: 2760 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode ...
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: feed speeds: 20.000 mm/minrapid traverse: 30 m/minFeed force: 5 kNtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,0 x 3,0 x 2,8 mChip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: XYZ Coolant-Air-Blast- ...
Solid drill diameter: 200 mmbore depth: / mmnumber of spindles: / Technical dataPower: 129 kWControl: Siemens NC controlSpeed range (stepless): 2 - 300 rpmFeed range (in steps): 3 - 4500 mm/minOil system capacity: 20,000 litresMaximum delivery rate: 1500 l/minCircular diameter in steady rest: 1100 mmCircular diameter over bed: 1250 mmCentre distance: 11000 mmClamping diameter face plate: up to 1100 mmMax. workpiece weight with one tailstock: 10 tClamping range of the two steady rests: 150 - 1100 mmClamping range BOZA: 1 = 200 - 400 mm2 = 400 - 800 mmDimensionsMin. outer diameter: 406 mmMax. outer diameter: 850 mmWall thickness: 10–150 mmMax. workpiece length: 11,000 mmMax. workpiece weight: 10 tMax. strength: 800 N/mm²Specific cutting resistance (Ks): 2000–2100 N/mm²Machine dataMachine length: 28,800 mmCentre height: 560 mmSwing diameter over bed: 1120 mmFull drilling diameter: 200 ...
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mmbore capacity in steel: perm. 24 mmspindle taper: ISO 40 DIN 2080Shank diameter: 32 mmquill stroke: 115 mmaxis stroke:: x-travel: 500 mmy-travel: 250 mmz-travel: 541 mmspindle:: turning speed range - spindle: 115 - 3.100 U/mintransmission ratio: 3 transmission ratio 1: 115 - 600 U/mintransmission ratio 2: 270 - 1.400 U/mintransmission ratio 3: 590 - 3.100 U/minmotor: 2,2 kWtable:: table surface area: 850 x 240 mmT-slot - width: 18 mmT-slot - distance: 80 mmtotal power requirement: - kWweight of the machine ca.: 480 kgdimensions of the machine ca.: 1,4 x 1,1 x 2,5 mVice: RÖHM Drilling and Milling M/COPTIMUM - OPTImill BF 46 Vario- incl. OPTIMUM base cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1000 x 560 mmspindle taper: HSK 63 A spindle turning speed - stepless: 20 - 16.000 U/minspindle power: 15 kWmax. torque on the spindle: 9 Nmfeeds x/y/z -stepless: 1 - 30.000 mm/minrapid traverse: 35 m/minfeed power: 8000 NATC: 30 Stationencontrol: HEIDENHAIN, TNC 430 total power requirement: 32 kVAweight of the machine ca.: 7,2 tdimensions of machine L x W x H: 2,75 x 2,30 x 2,95 mAccessories: HEIDENHAIN probe TS 632, various tool fixtures, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacità del foro nell'acciaio (diametro): mmLunghezza del braccio: mmAltezza del pezzo max.: mmPotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Produttore: Elumatec Modello: SBZ 122/31 Anno di costruzione: 2007 Tipo di macchina : Centro di lavorazione barre Lunghezza di lavorazione: 3750 mm con supporto barra / 3500 mm senza Corsa dell'asse: X = 350 mm, Y = 280 mm, Z = 300 mm Velocità: 30 m/min velocità di posizionamento (tutti gli assi) Precisione: ±0,1 mm Mandrino: 6 kW, 21.000 giri/min, HSK F63 Stazioni utensili: 5 Diametro massimo dell'utensile: 200 mm (manuale), 92 mm (automatico) Diametro massimo della lama della sega: 500 mm Consumo d'aria: ~50 l per ciclo Fabbisogno di aria compressa: >7 bar Alimentazione: 400 V, trifase Scopri di più qui - / Contattaci all'indirizzo -
x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Produttore: LINEMATIC Modello: LM34/705 Anno di costruzione: 2004 Potenza: 14 kW Tensione: 400 V, 20 A, 50 Hz Fase: trifase + neutro + messa a terra di protezione Certificato CE Scopri di più qui - / Contattaci all'indirizzo -
x-travel: 1.350 mmy-travel: 1.150 mmz-travel: 895 mmtable diameter: 4.590 x 6.990 x 3.150 mmmmhandwheel: el. tool adaptor: HSK-A63 turning speeds: 24.000 U/minengine output: 38 kWtable weight: 1.600 Kg: 92 facha-axis: A +16/-120 Control: HEIDENHAIN iTNC 530 c-axis: 360 °total power requirement: kWweight of the machine ca.: 14.000 kgdimensions of the machine ca.: 4.590 x 6.990 x 3.150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacità di alesaggio nell'acciaio (diametro): 40 mmgola: 380 mm corsa di alesaggio: 160 mm: 4 velocità: 60 - 1250 U/mindimensione-tabella: - mmpotenza totale richiesta: 3,3 kWpeso: 900 kgdimensioni: - mmCaratteristiche:-Trapano per ingranaggi con un design robusto-Tavolo di foratura montato su colonna-Rotazione destra/sinistra-Alimentazione-Sistema di raffreddamentoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmControl: Haas CNC Max. rpm: 12.000 min/-1power capacity - main spindel: 22,4 kWmax. Torque: 102 Nmtool taper: BT 40 table surface area: 914 x 457 mmT-slots: 16 mmmax. table load: 1362 kgnumber of toolpositions: 24 pos.tool taper: SK 40 max. tool diameter: 76 (152) mmmax. tool weight: 5,4 kgchange-time tool to tool: 2,8 secchange-time chip to chip: 3,6 secrapid traverse ( X / Y / Z ): 18,0 m/minNumber of working hours: 14375 hspindle drive: 22,4 kWweight of the machine ca.: 3,42 tdimensions of the machine ca.: 3,2 x 2,5 x 2,8 mCE signed: Condition: ready for operation: Machine still in the delivery factory: Electric 400 Volt: Coolantsystem: Chip conveyor: Tool receiving divers: Cooling equipment: Dividing apparatus: Lehmann 2-Achs Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operati ...
x-corsa: 760 mmy-corsa: 610 mmz-corsa: 610 mmcontrollo: Heidenhain 530 potenza totale richiesta: kWpeso della macchina ca.: 6700 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-corsa: 560 mmy-corsa: 560 mmz-corsa: 660 mmcontrollo: Siemens Sinumerik Celos potenza totale richiesta: kWpeso della macchina ca.: 9240 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Diametro di foratura: 18 minCapacità di foratura Diametro max.: 15 mmProfondità del foro: 90 mmGola: 215 mmMandrino: Bis 360 mmMandrino: 560 mmPiastra del tavolo: 350 x 290 mmDiametro della colonna: 75 mmAltezza totale: max. 1050 mmPeso: circa 100 kgVelocità di rotazione del mandrino - continua: 100 - 1800 U/minVelocità del motore:: 700 / 1400 U/minMotore a cambio poliI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
gola: 180 mm corsa della penna: 80 mm capacità continua: 20 cono del mandrino: MK 2 dimensioni della tavola: 280 x 245 mm altezza della macchina: circa 1000 m diametro della colonna: 73 mm distanza mandrino / tavola: max. 425 mm dimensioni: circa 615 x 330 x 1015 mm peso: circa 60 kgincl. vice HM Müller HT100I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
spindle diameter: 130 mmx-travel: 9500 mmy-travel: 2500 mmz-travel: 1000 mmw-travel: 800 mmrapid traverse: 10 m/minspindle speed:: chip conveyor: control: Heidenhain TNC 430power capacity: kWrotary table:: 2500x2500 mm: 45 tTravel: 2000 mmspindle taper ISO: 50 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine was completely overhauled in December 2015The tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible ...
x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...
2001 Hurco VMX40 Dati tecnici: - Controllo Ultimax 4 - scheda di rete - Software DXF - Cambio utensile 24 posti - Supporto SK40 - Velocità del mandrino 10-10.000 giri/min - Convogliatore trucioli - Ore di funzionamento 5279 Viaggio: - Asse X 1.020 mm - Asse Y 510 mm - Asse Z 610 mm Scopri di più qui - / Contattaci all'indirizzo -
Maschinen Schwartpaul GmbH
