Fabbricante:
(Categoria: 101)
Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mmy-travel: 2000 mmz-travel: 2000 mmControl: SIN840D B - axis: 360 x 0,001 °A - axis: -90 - +90 x 0,001 °feed X/Y/Z/-axis: 1 - 30000 mm/minrapid traverse X/Y/Z: 30,00 m/minfeed B-axis: 0,1 - 3600 ° / minfeed A-axis: 0,1 - 3600 ° / minspindle turning speed - gearbox stage 1: 1 - 1096 1/minspindle turning speed - gearbox stage 2: 1096 - 6000 1/minpower capacity: 45,00 kWtool taper: HSK-A 100 max. torque on the spindle: max.1250 Nmtool magazin:: 207 + 10 tool length - max.: 700 mmtool diameter: 300 mmpallet size: 2x 1000x1000 mmworkpiece weight: 5000 kgT-slots: DIN650 T-slot - distance: 100 mmT-slot - width: 22 mmnumber of T-slots: 1 + 8 total power requirement: 100,00 kWweight of the machine ca.: tdimensions of the machine ca.: 13,00 x 8,00 x H4,50 m5-axis simultaneous machining center with control SIEMENS SIN840D, measuring probe, chip conveyor, coolant system, coolant ...
spindle diameter: 120 mmx-travel: 1250 mmy-travel: 1250 mmz-travel: 800 mmspindle taper ISO: SK50 number of spindle speeds: Max. 2000 min-1bore spindle stroke: . mmmain drive motor: . kWturning speeds: . U/minFeed: . mm/minControl: Heidenhain type: iTNC 430 T-slot - width: . mmT-slot - distance: . mmtable surface area: 1000x1000 mmTable load: 4000 kgtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMachine number: 62099The machine table can be rotated continuously via fixed control.Tool magazine has 40 positions.Conversion from Bosch NC System 5 to Heidenhain iTNC 430 approx. 2000The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane cap ...
x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensioni (L/L/A): 660x1050x1600 mmfilettatura metrica: M 33 Filettatura metrica: M 16 Filettatura metrica: M 14 Stahlno. Numero di flauti: 25x10mm 2x T-Nutenthroat: 220 mmpeso: 730 kgI dati di questo annuncio sono stati creati con ModulMWS, la soluzione software di LogoTech oHG.
x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: SIN 840 D SiemensB - axis: +/- 110 x 0,001 °C-axis: 360 x 0,001 °feed X/Y/Z-axis: 1 - 20.000 mm/minrapid traverse X/Y/Z: 40,00 m/minspindle turning speed - stepless: 20 - 8.000 U/mintool taper: SK40 power capacity at 100 % load: 13,50 kWpower capacity at 25 % load: 23,50 kWmax. torque at 10% load: 85,00 Nmmax. torque at 25% load: 150,00 Nmtable surface area: 2.920 x 740 mmnumber of T-slots: 7 T-slot - distance: 100 mmT-slots: 1x 18H7 / 6x 18H12 integrated rotary-table: 750 mmtable load of rotary table max.: 500 kgtool magazin:: 60 tool diameter: 80,00 mmwotkpiece diameter with 2 vacant positions: 130 mmtool length - max.: 300 mmweight of tools max.: 6,00 kgtotal power requirement: 57 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: 10,50 x 6,60 x H2,70 m5-axis simultaneous machining center with SIEMENS SINUMERI ...
x-corsa: 1800 mmy-corsa: 510 mmz-corsa: 480 mmpotenza totale richiesta: kWpeso della macchina ca.: 5500 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 297 mmbore stroke: 120 mmspeeds: 8 / 75 - 1600 U/mintable-size: 500 x 460 mmspindle taper: MK 4 column diameter: 115 mmspindle feeds:: 3 / 0,1 - 0,26 mm/Udistance spindle /table: 715 mmdistance spindle/base plate: 1180 mmengine output: 1,5 kWtable rotating: 360 Gradweight of the machine ca.: 335 kgdimensions of the machine ca.: 0,5 x 0,76 x 1,89 mElectric 380 Volt: Cooling pump in machine base: Machinelight: Unused exhibition machine at a special price: Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment,electromagnetic feed engagement by means of snaps on the control lever.The machine has minor transport damage, see picture no. 6. This isa exhibition machine at a special price, so we are selling it without ...
: gebraucht : 2017 : 3901 : China : 8490 €: 1 : 6790 €: 32 mm: MK 4 : 300 - 1.000 mm: 32 - 2.500 (16) U/min: 1760 mm: 800 mm: 2080 mm: 1600 kg: 530 - 1.000 mm: 2.2 kW: 240 mm: 250 mm: 0,75 kW: 0,10 - 1,25 (8) mm/Ubox table 600 x 455 x 455 mmcoolant equipmentmachine lampmechanical clamping for height adjustment and spindle stockelectr. clamping for arm rotationmachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 3 - 28 mmbore depth: 1000 mmcontrol: Heidenhain TNC 640 x-axis: 1000 mmy-axis: 800 mmz-axis: 800 mmspindle head - swivable: (W) +15°/-30° degB-axis (table): 360.000° degtable surface area: 1000 x 1000 mmtable load: 5,0 ttool taper: SK 40 spindle turning speed range: 60 - 6000 U/minspindle motor: 12 kWtotal power requirement: 58 kWweight of the machine ca.: 14 tdimensions of the machine ca.: 6,35 x 4,75 x 3,80 m5 axes Deep Drilling-Milling-MachineEquipped with:HEIDENHAIN TNC 640 control5 CNC AXES X – Y – Z – W – BNC rotary table 360.000 deg.Milling performance 150 cm3/min.Direct linear position measuring systemDigital AC drivesTable design with Hirschmann zero-point clamping systemNC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg.Automatic tool changer for 24 toolsInternal coolant supplyHigh-pressure coolant system 1200 li ...
x-travel: 750 mmy-travel: 270 mmz-travel: 300 mmtable-size: 900 x 350 mmspindle taper ISO: 40 spindle turning speed range: 18-1600 U/minNumber of working hours: 2543 hdigital readout: 3-Achsen Heidenhaintotal power requirement: 10 kWweight of the machine ca.: 1570 kgdimensions of the machine ca.: 2,60 x 3,80 x 2,35 mUniversal milling machine Berlett FE1-10, year of manufacture 1989Very robust tool milling machine with many accessories.Various vices.Manual rotary tableVarious holders and milling cuttersCoolant tankFull tool cabinet with milling cutters etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 €: 1179.36 €: 4100 mm: 6 mm: 4 mm: 50 mm: 12 1/min: 1.5 °: 20 : 17 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 3 Stk.: 865 mm: 580 mm: 4510 mm: 5230 mm: 2300 mm: 3600 mm: 2150 mm: 11460 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...
x-travel: 450 mmy-travel: 400 mmz-travel: 480 mmcontrol: MillPlus IT V600 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 10 / 15 kWmax. Torque: 130 Nmtool taper: SK 40 swivellable: B: -95 / +30 °NC-Rotary table:: table surface area: Ø 450 mmT-slots: 7x 14 x 63 mmmax. table load: 250 kgrotatable: C: 360 °max. workpiecediameter: 380 mmmax. workpiece height: 670 mmtool magazin:: number of toolpositions: 16 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 8,0 kgfeeds:: feed speeds: max. 30.000 mm/minrapid traverse: 30 m/minFeed force ( X / Y / Z ): 7 / 13 / 10 kNtotal power requirement: 27,6 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,1 x 3,0 x 3,0 mDocuments: Chip conveyor: Coolantsystem: elektr. hand wheel: NC-rotar ...
capacità di alesaggio in acciaio (diametro): 32 mmgola: 265 mmcorsa di alesaggio: 150 mmcono MK: 3 MKdimensioni della tabella: 390 x 390 mmavanzamenti: mm/Uvelocità di rotazione: 100 - 3300 U/minpotenza totale richiesta: 1,5 KWpeso della macchina ca.: 0,35 tdimensioni: 0,8 x 0,6 x 1,95 mDisplay inutilizzato con:- Attacco per il taglio del filo- Velocità del mandrino variabile- Sistema di raffreddamentoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
capacità di alesaggio in acciaio (diametro): 40 mmgola: 290 mmcorsa di alesaggio: 125 mmcono mandrino MT: 3 potenza totale richiesta: 1,8 kWpeso della macchina ca.: 250 kgdimensioni della macchina ca.: 1500x1000x1900 mmCaratteristiche: -Azionamento continuo -Arresto della profondità di foratura -Mandrino di foratura extra-lungoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Starrag CWK 400D – 4-axis horizontal machining center A 4-axis horizontal machining center from Starrag is available for sale. The machine is used, regularly maintained, and in fully functional condition. Machine details -Manufacturer: Starrag -Model: CWK 400D -Year of manufacture: 2005 -Operating hours: 32,099 -Control system: Siemens Sinumerik 840D -Machine weight: 12,800 kg -Space requirement (LxW): 5.8 × 4.8 m Technical data Travel distances: -X = 625 mm -Y = 650 mm -Z = 650 mm -B axis: 360° (0.001°) / 100 rpm -Spindle speed: 50 – 10,000 rpm (stepless) -Motor power: 24 kW / 37 kW -Torque: 230 Nm / 350 Nm Table & pallets -2 pallets, each 500 × 400 mm -T-slots according to DIN 55201 -Load: 400 kg -Pallet changer available (change time 8 s / 5 s) Tool data -Mounting: DIN 69893-HSK-A63 -Chain magazine with 60 spaces -Tool diameter: 80 mm (up to 160 mm ...
A 4-axis vertical machining center from the manufacturer Unisign, model Univers 4, built in 2004, is for sale. The machine is used but in good condition, fully functional, and has been regularly maintained. Special highlight: second milling spindle (replacement milling spindle available). Operating hours: 19,357 Key technical data -Travel distances: X = 1600 mm / Y = 400 mm / Z = 400 mm -B-axis: A-axis (360° x 0.001°) 20 rpm -Spindle speed: 0 – 9000 rpm -Control: Siemens Sinumerik 810D -Table size: 1 bridge with 4 sides, L 1800 mm, 4 x 113 mm -Table load: approx. 150 kg -Working feed: 5 – 28000 mm/min -Rapid traverse (X/Y/Z): 28000 mm/min Tool & magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 44 slots -Tool diameter: approx. 70 mm (with free slots up to 200 mm) -Max. tool length: approx. 240 mm -Max. tool weight: 5 kg -Max. total weight of tool magazin ...
x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmsize of pallet: 1.000 x 1.250 mmcontrol: SIN840D power capacity at 40 % load: 38,00 KWspindle turning speed - stepless: 20 - 10.000 U/minpower capacity at 100 % load: 25,00 kWmax. torque at 40% / 100% load: 288 / 187 Nmtool taper: SK50 feed X/Y/Z/-axis: 20 - 15.000 mm/minrapid traverse X/Y/Z: 60,00 m/minB - axis: -150° / +80° x 0,001 °feed B-axis: 3600 ° / minC-axis: 360 x 0,001 °Rapid motion C- axis: 1 - 3.600 U / min.table load: 3000 Kgtool magacine with: 240 tool diameter: 110 mmwotkpiece diameter with 2 vacant positions: 250 mmtool length - max.: 650 mmweight of tools max.: 15,00 kgtotal power requirement: 75,00 kWweight of the machine ca.: 55,00 tdimensions of the machine ca.: 12,50 x 8,00 x 4,20 m5-axis machining center with SIEMENS Sinumerik 840D control electronical handwheeloperating mode 4240-position tool magazine 4-po ...
: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4641.97 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmContinuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRobust, high quality drill head hood with ergonomically inclined frontLED lightingQuickly adjustable and ergonomic drill depth stopStepless speed control via central rotary knobEMERGENCY STOP pushbuttonThermal overload protectionSpindle stopDrill protection with electr. FuseConnection cable with Schuko plug3 years warranty for single shift operationOPTIONS:Machine cabinet with door and drawerCoolant deviceLED lighting with pivot armDrill package 3 (vice &, keyless chuck)The data for this ad was created with ModulMWS - the soft ...
: neu : 2024 : 3982 : prompt, Zwischenverkauf v : Spanien : 10830 €: 207.94 €: 1 : 35 mm: MK 4 : 300 mm: stufenlos 100 - 2.000 U/min: 3 kW: bis M 27 : 1100 mm: 600 mm: 1950 mm: 360 kg: 0,10 / 0,20 / 0,30 (3) mm/U: 150 mm: 125 mm: 90-890 mm: 1250 mm: 480 x 480 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEcolumn drilling machine with vario gear1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display3 automatic feedschuck guardleft-right drillingT-Slots and integrated coolant equipment in base standintegrated lightingdrill guardHEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTSreverse for tappingfast and precise setting and control of the speed without switching operations and without defined levelsmore particularly robust parts for wear resistant operation and smooth runningcompact design with high performanceCE normsuser manual ...
x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
altezza massima del pezzo: 645-1240 mm capacità del foro nell'acciaio (diametro): 50 mm lunghezza del braccio: 350-1590 mm peso totale, circa: 3500 kgvelocità di tornitura: 25-2000 U/min cono mandrino: filettatura MK5: M42 corsa del cannotto: 320 mm potenza totale richiesta: 4 kW gamma L-W-H: 2450x980x2840 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacità di alesaggio in acciaio (diametro): 32 mmgola: 280 mmcorsa di alesaggio: 110 mmcono mandrino MT: 3 dimensioni della tavola: 340 x 400 mmvelocità di tornitura: 210- 2600 U/minpotenza totale richiesta: 1,8 kWpeso della macchina ca.: 325 kgdimensioni della macchina ca.: 950 x 450 x 1750 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
x-travel: . mmy-travel: . mmz-travel: . mmControl: . type: . spindle speed:: . spindle taper: . surface area: . mmRotary table: . mmTable load: . kgb-axis: . °c-axis: . 0The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 640 mmworkpiece height max.: 950 mmbore capacity in cast iron: 50 mmthreading: . spindle taper MT: 4 turning speeds: 88-1500mm (6x) U/minFeed: mm/Usurface area: mmtotal power requirement: kWweight of the machine ca.: tMax. spindle-to-table distance: 950 mmMin. spindle-to-table distance: 220 mmQuill stroke: 220 mmKW: 1.5Volts: 380Machine number: 9028Included:Clamping cube 600 x 445 x 380 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further ...
x-travel: 1400 mmy-travel: 1050 mmz-travel: 1200 mmControl: Fanuc 31i spindle turning speed - stepless: 6000 U/minspindle taper: ISO 50 spindle motor: 35 / 22 kWpallet table size: 800 x 800 mmworkpiece weight: 2000 kgdistance spindle center to table: 75 - 1125 mmRapid Travel X / Y / Z-Achse: 24 m/mindimension of workpiece: 1450 x 1550 mmtotal power requirement: 71 kVAweight of the machine ca.: 27 tdimensions of the machine ca.: 7,3 x 4,3 x 3,75 mHorizontal 4-axis CNC machining centre- Fanuc 31i CNC control- 60-position tool changer (ISO 50)- Rotary table (1° division) with 2 pallets- High-pressure cooling 70 bar with cyclone filter system- Chip conveyor- Tool loading management- Renishaw RMP 60- TS 27R tool probeSpindle running hours 6000h, running hours: 8050hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.250 mmy-travel: 880 mmz-travel: 800 mmcontrol: TNC 426 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 15 / 10 kWmax. Torque: 500 Nmtool taper: SK 40 work table:: table surface area: 1.500 x 1.050 mmmax. table load: 2.500 kgnumber of T-slots: 10 T-slot - width: 18 H7 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 160 mmmax. tool length: 315 mmmax. tool weight: 8 kgmax. total weight: 100 kgfeeds:: rapid traverse ( X / Y / Z ): 15 m/minfeed speeds: 10.000 mm/mintotal power requirement: 29 kWweight of the machine ca.: 16,0 tdimensions of the machine ca.: 7,0 x 5,0 x 3,3 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Automatic Tool Changer: test probe: Heidenhain elektr. hand whee ...
Henrik Winter Holztechnik GmbH
