Used spiral conveyor belt with downward direction LIPSIA -In bakery condition- - Spiral conveyor belt - Collection table - Crimp barrel catch plate The plant is out of service. Viewing and test run are possible by arrangement.  ...

• more information

Tractor MAFI Industrial Transporter. The vehicle is fully operational, maintained and maintained by the company Caterpillar. New UVV test at handover. The transporter has a lift boom built in 2011, type SH 30 SV-1200, empty weight 3,600 kg, payload 30 to. We offer you a fully equipped MAFI heavy transporter and, if required, up to nine additional cargo trailers. If required, we can provide you with the weights of the trailers (up to 19 tons per piece). The vehicle can be viewed on site and technically demonstrated. If you are interested in buying, we offer you to test the vehicle for four weeks without obligation for a rental fee. Details Chassis no. 230714 Year of constructio ...

SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC 516-1326, (2) 51x102 vacuum tables- 15M FANUC Controller, (2) vacuum pumps 7-1/2 hp. each- 1995 very low hours, ……….…………..Price-$15,000 reduced  ...

• more information

21-32- RBO Two-piece roller conveyor (refurbished) Dimensions 7300x1250mm Dimensions of table no. 1: 4500x1250 mm Engine power 0.75kw Dimensions of table no. 2: 2800x1200 mm Engine power 0.75kw Max. load: 200 kg Adjustable height: 800-1150 mm Made in Denmark Weight 650 kg Transport dimensions 4600x1650x2000 mm Price 4500Eur (EXW Jonava, Lithuania) Note: It is possible to integrate machines between the conveyors (for example grinding machines)

RUDDER TRANSPORTER HYUNDAI HYDRAULIC CO. LTD Hyundai Hydraulic Co. Ltd. Rudder Transporter (2009) Size: 6410 x 7220 x 6995h Capacity: 200Tons Weight: 76.5Tons Frame up/down Capacity: 100T x 4set Stroke: 1500mm Speed: 180mm/min Driving Driver: Hydraulic motor Swing: Manual 5, 15, 30, 45, 90 deg. Speed: 1~6 M/min Working table Capacity: Pushing: 44T x 2 set Pulling: 28T x 2 set Stroke: 500mm x 2 set Working Table Sliding Capacity: 50Tons Stroke: 1300mm x 2step x 2set Table size: 1900 x 5650 mm Rudder Clamping Capacity: 65Ton x 4set Stroke: 650mm Hydraulic Pump type: Tanbem Gear Pressu ...

Yom: 2011 Elevating transporter 700 Ton KAMAG U1409-22H HS8E (2011) L/C No.: 5636ILS110510227 Package No.: 01/04 Gross/Net Wt.: 130,000Kg / 130,000Kg Dimension: 24,000 x 7,000 x 1,600 Weight 130,00 Make KAMAG Serial 20102227 Year 2011 Capacity 700  ...

• more information

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diamete ...

Quick change tool holder, steel holder head, quick change tool holder, quick change drill tool holder, quick change boring bar holder, quick change lathe tool holder, quick change head -Quick-change steel holder: quick-change head size. B with base plate -Division: 40-fold -Dimensions: 190/140/H150 mm -Total weight: 9.4 kg

Direction change unit, conveyor belt, conveyor belt, roller conveyor PAGUS Direction change angle: 90° stroke ( direction change unit ): 485 conveyor belt: Belt length: 700 mm Belt width: 400 mm diameter drive roller: Ø 89 mm Gear motor: SEW Type: S31 DT71K-4 0,15 kW 67 rpm 220 / 380 V 3AC 50 Hz IP55 gear ratio chain drive: 1 : 1 roller conveyor: track length: 260 mm web width: 300 mm roll diameter: Ø 40 mm used, tested ! Dimensions: 1600 x 1000 x 700 mm

quick change tool post, tool post head, quick change tool post, quick change drilling tool post, quick change post, quick change turning tool post, quick change head, turning tool post -Manufacturer: Ideal, quick-change turning tool holder -Locating hole : Ø 20 mm -Clamping height: 32 mm -Pad length: 155 mm -Dimensions: 180/160/H145 mm -Weight: 9.1 kg