working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm  ...

• more information

SCM Sintex NTE four-sided planer Working width 23 – 180mm Working height 6 – 105mm Number of spindles: 4 Spindle system Bottom 7.5kw Rights 7.5kw Left Mountain Spindle speed 6000r.p.m Spindle diameter 35mm Electric up-down and width adjustment of heads Feed rate: 6-12 m/min CE Certified Extraction pipes 1x150mm 2x120mm Machine weight: about 1000kg

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

Spindle swivel: No; Sliding carriage: Yes; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Height indicator: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 1200mm; Machine depth: 900mm; Weight: 600kg;

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vac ...

Number of spindles: 6 St. Working width: 240 mm Working height: 120 mm Dimensions (L/W/H): 4900 x 1700 x 1700 mm weight of the machine ca.: 3500 kg Control: CNC SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below ...

table dim. approx. 530x900 mm; throughput 5, 8, 12 and 18 meters/min.; maximum removal 8 mm (ATTENTION! Piping not included!) ...

• more information

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12