We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Cehisa EP-7 Edge Lijmer Brand: Cihesa Model: EP-7 Product gegevens: Edge thickness: 0.4 - 3.0mm (massief 5.0 mm) Banding height 10 - 60 mm Roll ø750 mm Panel thickness max. 8-60 mm Min. workpiece length: 120 mm Min. workpiece width: 75 mm Machine data: Control: Relay control 1. Tape capping 2. Gluing part 3. Cross-cut saw with HF motor 4. Flush milling - radius milling unit Feed: 10 m/min. Tool support radius mm Suction: MM Afzuig capaciteit: m³/hour Compressed air: 6 - 7 bar Dimensions LxWxH 2.9 1.2 1.5 mm (incl. plate 1.8 m) weight: 750 KG Electricity: 5,1 KW
Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is appr ...
CEHISA BRYKO EDGE BANDING MACHINE Glue tank Clipping the back of the front of the ball Milling up and down milling cutters Compact dimensions - length 1900mm ...
Code: 0253 Brand: CEHISA Model: BRYKO - CE Standard Automatic edge bander for wood, Pvc, veneer, abs, melamine edges - CE Standard Technical data: Edge thickness min/max 0,4/2 mm Min/max panel height 8-40 mm Min panel length mm 120 Min panel width mm 75 Panel feed speed mt/min 5,5 Composition: Gluing unit: Glue tank with digital thermostat - Automatic feeder for roll and strip edges - 1 motorised roller + 1 idle roller 2-blade End cutting unit with high-frequency motor - Tool rotation speed 12000 rpm Upper and lower trimming unit - Tool rotation speed 12000 rpm Total installed power Kw 2,5 Compressed air 6-7 bar Overall dimensions mm 1800 x 950 x 1200 h Weight kg 430 ...
Wire Mesh Trimming System Diameter: 2 - 6 mm possible, 3 versions available Suitable for: Industrial products - to cut the overhangs ...
Baader 988 Trimming machine for salmon Condition: Good, working This is the high-speed trimming machine for salmon and trout. Make it possible to reduce manual work and increase quality and speed of cutting belly side, back side and surface of fillets. Due to advanced technology this unit calculates size and volume of every fish fillet before trimming. Average capacity: up to 50 fillets per minute. The optimal size of fish fillets for maximum product throughput and quality (LxW): up to 750 x 250 mm. Data of cutting stored in PC and parameters of trimming could be archived. Equipped with Baader 1517 Filet Transfer Unit.
Double lane and fully automatic trimming machine for salmon fillets. Due to advanced sensor technologies and fast calculating, this unit cuts fillets for optimal shape and economic configuration (all the the evaluates based on weight and shape of fillet). Capacity reaches up to 25 gillets per minute. Belt width: 200 mm (each lane). Approx. dimensions (LxWxH): 4500 x 1850 x 2200 mm.
One used SCHLATTER automatic binding unit for welded mesh stacks. Comprising a left and right unit; automatically binds the mesh stack ...
Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N ...
Complete Tetra Pak filling line A3/FLEX 1000 Edge, V400, year 2018 Package volume: 0,5L-1L Including: - Filler Tetra Pak A3/Flex, V400 - Capper 40 Flex with cap feeder - Line controller 30 Plus from 2017 - Cardboard Packer 32, 3x4, from 2018 - Accumulator Helix ACHX30-0700-50m - Quick change Working hours (November 2023): 18.600h Final Products: Milk Used Materials: Carton Processes: Filling Application: Aseptic The line is still in production.