Very well maintained 80 liter machine, with 2 x knife shaft speed + 2 x bowl speed  ...

• more information

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

Infinitely adjustable cutting thickness from approx. 0 to 42mm, max. approx. 160 cuts/minute. Push-button operation, voltage 400 V / 3.0 kW, chamber length 200 x 240 x 700 mm, 1 toothed knife ready for use. Infinitely adjustable cutting thickness from approx. 0 to 42 mm, approx. 160 cuts/per minute Push button operation, voltage 400 V / 3.0 kW, chamber length 200 x 230 x 700 mm, 1 toothed knife working condition.

Dadaux meat slicer with integrated cooling, type: NEOCUT, number: P-1656, year of construction: 05-16, 230 V, 50 Hz, refrigerant: R134a, 140 gram, dimensions: 350 mm x 500 mm x 600 mm. ...

• more information

Dadaux grinder with cooling, type: ZIRCON, number: M-2239, year of construction: 10/13, 230 V, plate diameter: 82 mm, refrigerant: R134A, quantity of refrigerant: 140 gram, total dimensions: 420 mm x 400 mm x 550 mm. ...

• more information

REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm

1 THIES high temperature vertical cone / bobbin dyeing machine type iCone 1800, year 2017 (commissioned in 2018), loading capacity 765 kg in CO / PES, SEDO T858 controller, ...

• more information

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technische Daten: Technische Daten - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 1100 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm - Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

mit Kopiereinrichtung Technische Daten: - Spitzenweite 1100 mm - Spitzenhöhe 185 mm - stufenlose Geschwindigkeit 500 - 2000 Upm. - Spindelstock 90C schwenkbar daher Aussendrehen möglich - Kopiervorrichtung zum kopieren von Originalen oder nach Schablone - Bett, Untergestell, Reitstock und Spindelstock aus massivem Grauguss - Reitstock MK 2 - Schnellverstellung für Reitstock - Handauflage und Motorteil - Motor 1 PS / 400 V - Gewicht ca. 130 kg inklusive: - Gussuntergestell - Vierzackmitnehmer - kugelgelagerter Rollkörner - Planscheibe Option: -Lünette EUR 31,00