Thermally insulated hall, whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. WALL CLADDING: Sandwich panels, grey-white on wall substructure made of cold-formed and galvanised lightweight profiles. LOCATION: South Eifel, Rhi ...

Steel hall complex built in three construction phases (consisting of a small production hall built in 1990, a large production hall built in 1997 and a warehouse built in 2007), which is to be dismantled in the short term. It is a thermally insulated hall complex whose supporting structure, building envelope and equipment can be reused. H6 - Production hall, built in 1990 with crane runway hL23.06 x hB13.32m x dH6.3m / fH8.8m = GFA 307.16 sqm ; Storage area on the upper floor: 5.07 x 12.95 = NF 65.66 sqm ; The primary construction consists of hot-rolled Euro profiles. The secondary construction for the building envelope is made of rolled steel, i.e. roof purlins made of IPE 160;  ...

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). S ...

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards  ...

• more information

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates  ...

• more information

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

General SKU404U1229 LocationBarneveld MakeLudwig Edel No.85 250/1 Year of construction1986 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors ReactorBioreactor Capacity2500 Ltr. (max. 3500 Ltr.) Vessel sizesdia. 1600x1970 mm Dished bottomcheck Dished top sidecheck ManholeDN100 Top connectionsDN25, DN40 (2x CIP) OutletDN50 Half coil jacketedcheck Max. temperature-5 °C With propellor stirrercheck (magnetic) Motor1,1 kW Speed mixing shaft1400 rpm Information Mo ...

General SKU305U615 LocationBarneveld MakeSTC Engineering GmbH TypeReaktor 6500LTR No.6004 Year of construction2005 Pressure Working pressure0.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume6500 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6500 Ltr. Vessel sizesDia. 2000x2534 mm Dished bottomcheck Dished top sidecheck ManholeDia. 450 mm Top connectionsDN200, DN100, DN50(4x) OutletDN80 Half coil jacketed45,5Ltr Max. temperature-20/160°C With paddle stirrercheck EKATO, Type: HWL2080 Motor7,5kW, 380-420/655-725Volt, 1440rpm (EX) Speed mixing shaft46rpm Stainless Steel Reactor ...