ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW IC ...

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with ...

Semi-automatic line model (Italian firm« AWM ») intended for the production of reinforcement grids Class A-III (A - 400C); 5, 0 - 12.0 mm. Longitudinal and transverse pitch cell - 100, 150, 200 mm. The length of the grid varies from 1, 5 to 6.0 m, width of 1.0 - 2.4 m. Dimensions and weight: Board Net – 32002000800 mm Main Control Desck – 600600200 mm Length - 7023+7067+3315+1390+6120+5435 +1400 ( Total:31440 mm) Width - 6200 mm. Weight - 20 000 kg Main Electrical Characteristics: Main supply rated voltage 380V +/- 10% Rated frequency 50 Hz +/-1% Phases 3 and ...

Linear packaging machine made of stainless steel, it is composed of a filling station which allows us a fast and precise filling of both liquid and viscous products. Flow meter fillers are a good solution for packaging a wide range of formats, since the flow meters that use this technology allow us to dose containers with a large volume difference in the same machine. This technology can be applied to the vast majority of industries, both for the packaging of chemical or cosmetic products, as well as edible or automotive oils. Characteristics Number of pistons: 3 Height: 1970mm Length: 4490mm Width: 950mm

The automated plate processing line DS was designed for high-efficiency drilling and plasma cutting with the possibilities of automatic plate feeding and automatic part sorting on output. The machine is dedicated to heavy-duty structural steel applications such as production of high-precision fittings, gussets and end plates. Type: DS 6001.20P Plasma cutting: - 3D plasma bevelhead for cutting vertically and at an angle up to +-50° (auto calibration) - Hypertherm XPR 300 (piercing 45 mm / 6 mm straight cuts at 170 amp up to 200 mm/min) - max sheet size: 6000 x 2000 mm - material thickness: 3 gt; 30 mm - plasma marking - laser light Drilling: - MG-40 P26 drilling device ISO 40 - drilling r ...

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,  ...

• more information

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000  ...

• more information

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, H ...

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2 ...

Maker: Muhong Material Width: 500mm - 20000mm Material Thickness: 8mm - 20mm Coil Weight: 35 ton Coil ID: 410mm - 650mm Coil OD: 1800mm Direction: Right to Left Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 5-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 300mm Motor: 132Kw DC Drive Driven Exit Conveyor 9-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 230mm Motor: 200Kw DC Drive Driven Exit Conveyor Hydraulic Shear Entry Entry Pinch Rolls Self Contained Hydraulics  ...