We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: АС 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: АО 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg
ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons
Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR
Maximum force: 2000 tons Slider stroke length: 500 mm Number of courses of a slider per minute: 6 Number of single turn-on: 3.6 The closed height: 1160 mm Adjustment: 220 mm Table size: -From left to right: 2000 mm -From front to rear: 2500 mm -Thickness die plate: 300 mm Slider overall dimensions: 1600x2000 mm Aperture in a table: 1250x1250 mm window dimensions in cheeks: 1600x1000 mm Maximum Die Weight: 6000kg Hydropneumatic cushion in the table: ·working stroke 250mm ·maximum clamping force 350 ton-force ·maximum push force 20 ton-force Main electric motor power: 125 kW Press overall dimensions: 5390x4870x8860mm Press weight: 228.990 tons
Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton
General SKUR0068 LocationBarneveld MakeDewaco Ltd (FI) TypeFPD-16 Belt Filter Press No.01-965 Year of construction2010 Main Features MaterialStainless steel Motor0.75 KW Width1600 mm Specified Features - Sieve belt press Motor0,75 kW 220-240/380-420 Volt and 0,37kW 220-240/380-420 Volt Band speedvariabel Belt width1600mm With fluid reservoircheck MaterialStainless steel Information With switchon the gearbox Weight3400 KG CEcheck Floorspace3,5x2,4 M Total height2,6 MSieve belt pressesDEWAFilters > Sieve belt pressesBrand > DEWA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinatio ...
Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.
BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine s ...
VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR, ...
Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System ...