pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper par ...

pressure: 80 t chamfer lenght: 2550 mm distance between columns: 2050 mm Control: keine stroke: 250 mm light barrier: SICK The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 125 mm distance between columns: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

pressure: 175 t chamfer lenght: 3550 mm stroke: max. 410 mm Control: Cybelec Modea 10 S height of the machine: 3200 mm weight: 14.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Hydr. CNC-Sheet metal Shear make GWF MENGELE type S 8 - 1500Machine -No: S2544, built in 1989Max. Cutting length: 1550 mmMax. Sheet thickness: 8 mmlateral. Discharge i. Stand: 50 mmSheet metal passage: 16 mmCutting angle adjustable: 2 ° 30 - 0,5 °Empty strokes: 25 - 32Number of hold-downs: 8Cutting pressure: 280 barHold-down pressure: 80 barOil filling: 300 lDrive power: 18.5 kWTotal connected load: 20.1 kWExternal dimensions: 2130 x 3260 x 2360 mmWeight: 5.8 tWith- CNC control SIEMENS S 5 for numerical sheet bending- Holding device mot- Sheet metal removal with conveyor belt- Cutting gap and cutting angle m. Control programmable- Spare knife- Schermesser for 750 kg strength- Separate hold ...

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, ...

sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional  ...

• more information