torni usati in vendita (3,110)

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura sul letto: 460 mmlunghezza di tornitura: 1250 mmaltezza del centro: 230 mminterasse: 1250 mmgamma di velocità di tornitura del mandrino: 35 - 1800 U/minpeso della macchina ca.: 2,7 tAccessori: mandrino a 3 griffe 250 mmø, testa MULTIFIX con 3 inserti, solido stabileI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura sul letto: 360 mmdiametro di tornitura sul supporto della slitta: 180 mmlunghezza di tornitura: 900 mmgamma di velocità di tornitura: 25 - 1600 U/minpotenza totale richiesta: circa 3 kWpeso della macchina ca.: 1,5 tdimensioni della macchina ca.: 2,5 x 1 x 1,5 mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 340 mmturning length: 600 mmturning diameter over slide: 300 mmcontrol: Siemens 840 D spindle passage: 55 mmspindle nose: ASA 6 number of spindle speeds: 4000 U/minspindle motor: 27 kWNumber of tools: 12 VDI 40driven stations: 12 VDI 40speed of driven tools: U/minpower of driven tools: kwrapid traverse: 30 m/minSpindlespeed subspindle: U/minpower sub spindle: 15 kwrange L-W-H: mweight of the machine ca.: tCNC- lathe with driven tools an subspindleDriven toolstation cannot be used due to cable breakage- chip conveyor- sub spindle- driven tool stations (not working)- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: 200 mmlunghezza di tornitura: - mmcontrollo: DMG potenza totale richiesta: kWpeso della macchina ca.: 5200 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura: 246 mmlunghezza di tornitura: 445 mmcontrollo: Fanuc 32 potenza totale richiesta: kWpeso della macchina ca.: 4250 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 830 mmswing diameter: 920 mmturning height: 750 mmcontrol: Fanuc 0i-TF travel -x axis: 495 mmtravel -z axis: 780 mmturning speed range - spindle: 1940 U/mindrive capacity - spindle motor: 37 / 30 kWchucking diameter: 380 mmturret (x-stations): 12 posrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 20 m/minfeed: mm/minspindle diameter in front bearing: 160 mmc-axis: 360° (in 0,001°) workpiece weight: 870 kgtotal power requirement: 61,78 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 2,1 x 2,7 x 3,6 m- Control unit FANUC 0i-TF- Tool Turret 12-fold- Coolant system- Foot switch- Automatic safety switch Front door & full enclosure- Work area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mmpower capacity at 100 % load: 25,20 kWpower capacity at 40 % load: 30,20 KWmax. torque at 40% / 100% load: 180 / 135 Nmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minworktool support: No. 1 x-axis: 290 mmy-axis: 165 mmz-axis: 600/950 mmB - axis: 360 °rapid traverse X/Y/Z: 18 / 18 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNnumber of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mmtoolpiece turning speed range: 8.000 / 2.000 U/minpower capacity at 25 % load: 5,80 kWmax. torque at 25% load: 4x18,6 / 4x74 Nmtool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mmz-axis: 600/950 mmy-axis: +/- 60 mmrapid traverse X/Y/Z: 18 / 15 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNtool turret - number o ...

turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC turning diameter over slide: 880 mmturning diameter over bed: 1220 mmtail stock: M80 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmspindle turning speed - stepless: 0 - 1000 U/minspindle motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mcomplete retrofit in 2020- CNC Control Fagor 8055 TC- Tool holder turret:SAUTER model 0.5.320.025, vertical axis- Chip Conveyor- 4-jaw chuck Ø1000 mm- 3-jaw chuck Ø500 mm- Steady Ø500 mm- Movable bezel Ø250 mm- Special bar for machining very long interiors- CoolantRETROFITTING IN 2020• Grinding of carriage guides on the X and Z axes• Preloading of X and Z axis ball screw nuts• New Turcite placed on the X and Z axis carriages• General review and disassembly of the engine and head regulator• General review  ...

diametro del frontalino: 5500 mmdiametro dell'oscillazione: 6000 mmaltezza di tornitura: 4400 mmvelocità di tornitura: - U/minmotore di azionamento principale: - kWControl: FAGOR 8055 peso del pezzo max.: 100 corsa del tram per lato: 1500 mmtraversa - regolazione: 3000 mmpotenza totale richiesta: - kWpeso della macchina ca.: - tdimensioni della macchina ca.: - mdotato di:- Controllo CNC 8055- 1ram su traversaI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmturning speeds: U/minmain drive motor: 70 kWControl: FAGOR 8070 workpiece weight max.: 20 tcolumn daylight: 3300 mmmilling motor: 16 kWfeeds crossrail-slide vertical: 3000 mm/minfeeds crossrail-slide horizontal: 3000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC Control FAGOR 8070- C-axis (angular positioning of the table)- angular milling Head- Telescopic covers of the cross rail and columns guideways- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura: mmlunghezza di tornitura: 300 mmdiametro di oscillazione sopra la slitta del letto: mmpotenza totale richiesta: kWpeso della macchina ca.: 0,4 tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura: 950 / 650 mmlunghezza di tornitura: 2000 / 2500 mmcontrollo: HEIDENHAIN Manual Plus diametro mandrino a 3 griffe: 800 mmgamma di velocità di tornitura: 40 - 1000 U/minpotenza totale richiesta: 35 kWpeso della macchina ca.: 12 tdimensioni della macchina ca.: 8 x 3 x 3,5 m12 x stazione TorrettaContropunta2 x trasportatori di trucioliPrezzo EXW 17036 NeubrandenburgI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 320 / 270 mmworkpiece length - max.: 620 mmcontrol: Mazatrol Smooth swing diameter: 300 / 172 mmworkpiece weight: kg------------ MAIN SPINDLE ------------: turning speeds: 5000 U/minpassage of spindle: 76 mmc-axis: 0,0001 spindle motor: 15 / 11 kWspindle nose: A2-6 travel -x axis: 175 / 111 mmtravel -y axis: 100 / 70 mmtravel -z axis: 520 / 580 mmrapid travel x/y/z: 30 / 26 / 40 m/min2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle nose: A2-5 spindle passage: 61 mmw-axis: 625 mmbar capacity: 65 mmtotal power requirement: 39,2 kVAweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2,87 x 2,3 x 2,4 mHighly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel- Smooth CNC control- Main & counter spindle- 2 tool turrets-- 12-station tool turret (2x)-- Spindle for rotary tool: spi ...

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.