torni usati in vendita (3,110)

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di rotazione: 330 mm Lunghezza di rotazione: 650 mm Velocità di rotazione del mandrino - senza passi: 30-5000 U/minspindle Taper: ASA A2-5 controllo: FANUC 18i-T I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornazione: 340 mm, lunghezza di rotazione: 1000 mm: Mazatrol SmoothC, requisiti totali di potenza: kWweight della macchina ca.: tdimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

Diametro della placca frontale: 4500 mm diametro oscillazione: 5000 mm altezza di rotazione: 2500 mm peso massimo del pezzo: 63 tno. delle slitte: 2 corsa massima del carrello: 1600 mm velocità di rotazione della placca facciale: 0,3 - 32 U/minAnzahl der Drehzahlstufen: 4 requisiti totali di potenza: 130 kWweight della macchina ca.: 145 tdimensioni della macchina ca.: 6,6 x 11,4 x 8,4 m - DRO - 2 Rams verticoli (-15 / +40) I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di rotazione sul piano: 280 mmDiametro di rotazione sul supporto a slitta: 170 mmLunghezza della rotazione: 600 mm Peso della macchina ca.: 400 kg Passaggio del mandrino: 26 mm Velocità: 55-2000 U/min Requisiti totali di potenza: 1,4 kW Dimensioni della macchina ca.: 1,5 x 0,8x 1,3 mInclusi il supporto di rettifica SOD EMCOIncluso il mandrino EMCO a 4 ganasceInclusi piedi per la macchinaInclusi i piedi per cambiare ingranaggi. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 4200 mmturning height: 2000 mmworkpiece weight: 50000 kgcross travel of ram-slide: 2300 mmslides vertical travel: 1250 mmswival range +/-: -15/+30 Gradfaceplate turning speed range: 0,5 - 55 U/minControl: Fagor 8055i CNC total power requirement: 182 kWweight of the machine ca.: 134 tdimensions of the machine ca.: 5920 x 10200 x 8400 mmMachine overhauled in 2008- CNC Control FAGOR 8055i- Tool C8- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di rotazione sul piano: 430 mm Diametro di rotazione sul supporto di slitta: 230 mm Lunghezza di rotazione: 1000 mm altezza centrale: 215 mm Altezza centrale: 1000 mm Alesaggio del mandrino: 56 mm Intervallo di velocità di rotazione: 19 - 2000 U/minimo Potenza totale: 7,5 kWweight della macchina ca.: 1,9 tdimensioni della macchina L x Larg x A: 2,78 x 1,25 x 1,40 m Accessori: mandrino a 3 ganasce 250 mmø, Post sullo strumento 4 pos, solido e stabile. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 550 - 1100 mmclamping length: 1650 - 2400 mmguage width: 1435 mmmotor power: 60 (each Chuck) kwspindle turning speed range: 9 - 180 U/minworkpiece weight: 3500 kgtotal power requirement: 228 kVAweight of the machine ca.: 54 tdimensions of the machine ca.: 7,9 x 3,55 x 3,4 mThe Hegenscheidt-MFD portal wheel lathe is a wheel lathethat is easy to operate and maintain. Its portal design allows for wheel setsto roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheelwear conditions.Mounted to each side of the portal type bed are the headstocks, with integrateddrivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functions.- Working R ...

turning diameter: 1000 mmturning length: 3000 mmcontrol: Siemens 828D turning diameter over bed: 1000 mmturning diameter over slide rest: 700 mmworkpiece weight: tspindle drive motor: 33,6 kWspindle turning speed range: 1 - 550 U/mincentre height: 510 mmx-axis: 520 mmz-axis: 3020 mmspindle bore: 260 mmspindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mmtailstock quill stroke: 200 mmrapid travel (x and z-axis): 8 m/mintotal power requirement: 40 kVAweight of the machine ca.: 12,2 tdimensions of the machine ca.: 7,52 x 3,2 m- Siemens 828D CNC- C-axis- 8-station tool turret with powered tools (VDI 50), 3000 rpm- Tailstock- Powered tool holders- Chip conveyor- CEOperating hours: 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di rotazione: 220 mm lunghezza di rotazione: 450 mm controllo: Siemens 840 D trasmissione principale DC: 27 kW Consumo totale di potenza: 27 + 8,5 + 5 + X kWweight della macchina ca.: 6,5 tdimensioni della macchina ca.: 10 x 2 x 2 mFilm:https://www.youtube.com/watch?v=OffdO1J4G5YTi dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 2.800 mmdiameter of spindle flange: 1.100 mmmax. swing diameter: 3.000 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: max. 230 min/-1power capacity - main spindel: 206 kWmax. Torque: 53.000 Nmmax. load: - kgC-Axis: Tool Mount:: Rechts / Righttool taper: Capto C8 swivellable: B: 0 - 270 °Spindle speed - driven tool pos.: max. 6.000 min -1max. Torque: 120 NmTool Mount:: Links / Lefttool taper: Capto C8 tool magazin:: Rechts / Rightnumber of toolpositions: 41 pos.max. tool weight: 20 kgmax. tool length: 400 mmworkpiece diameter at full load: 150 mmtool taper: Capto C8 tool magazin:: Links / Leftnumber of toolpositions: 25 pos.workpiece diameter at full load: 150 mmmax. tool weight: 20 kgmax. tool length: 400 mmtool taper: Capto C8 axis stroke:: x-axis: 1: 2.700 mmx-axis: 2: 2.700 mmz-axis: ( 2x 1.000 ) mmfeeds:: rapid traverse:  ...

turning diameter: max. 3.800 mmdiameter of spindle flange: 1.900 mmmax. swing diameter: 3.800 mmcontrol: 840 D sl SiemensMain spindle:: turning speed range - main spindle: max. 100 min/-1power capacity - main spindel: 200 kWmax. Torque: 67.000 Nmgear box: 1:30 max. load: - kgC-Axis: Tool Mount:: Rechts / Righttool taper: Capto C8 swivellable: B: 0 - 270 °Spindle speed - driven tool pos.: max. 6.000 min -1max. Torque: 120 NmTool Mount:: Links / Lefttool taper: Capto C8 tool magazin:: Rechts / Rightnumber of toolpositions: 41 pos.max. tool weight: 20 kgmax. tool length: 400 mmmax. tool diameter: 120 mm0: 125 mmtool taper: Capto C8 tool magazin:: Links / Leftnumber of toolpositions: 25 pos.workpiece diameter at full load: 150 mmmax. tool weight: 20 kgmax. tool length: 400 mmaxis stroke:: x-axis: 1: 2.800 mmx-axis: 2: 3.200 mmz-axis: 1.000 mmfeeds:: rapid traverse: X: 32 / Z: 20 m/m ...

diametro di tornazione: 370 mm, lunghezza di tornazione: 424 mm: Fanuc fabrica, potenza totale: kWweight della macchina, ca.: tdimensioni della macchina ca.: m. I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.