saldatrici usati in vendita (1,604)

table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: GoodAire 1800 output: 1.800 cbm/Stundeweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

numero: 37 Posizione: 28 mmcondizione: neu peso: 29 kgSet base 1 37 pezzi, sistema da 28 mm, composto da:Morsetti: 4 x 280604Bullone: 8 x 280511Arresto: 6 x 280420.NAngolo: 2 x 280110.GBullone filettato 8 x 280543Arresto 8 x 160415Set di accessori. 1 x 163999Prezzo più imballaggio e trasporto.

weight max.: 3000 kgworkpiece diameter: 20 - 1500 mmdrum diameter: 100 x 200 mmconnected load frequency: 230 Vtotal power requirement: 0,12 kWdimensions: 0,8 x 0,37 x 0,36 mspeed: 100 - 1000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,64 tdimensions: 2,4 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional Surcharge for 25mm material thickness: 340, -EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tdimensions: 2,4 x 1,2 x 0,95 mWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165mmBottom ribbed for reinforcement.Incl. floor bearingAccessories optionalSurface evenness 0.2 - 0.4mm over 1000mm.- with drawer unit- Grid shelf- Heavy-duty castors steerableWelding accessories shown not included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,19 tdimensions: 1,2 x 0,8 x 0,85 mSiegmund workstation including 2 drawersPremium Light, through hardened tool steel X8.7,plasma nitrided and BAR coated.Drilling Ø 28 mm, drilling surface 100x100 mm grid.Material thickness approx. 15 mmWith the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop!Consisting of:1x 004002 (Siegmund Workstation)1x 804004.X7 (perforated plate)1x 284030 (clamp holder)1x 004020 (shelf)1x 284035 (bolt and prism holder)1x 004025 (tool wall including shelf)2x 004210 (drawer)Spacer ring 800653.N is required for clamping with bolts 280510/280511. ...

number: 10 Stk.clamping range: 15 - 50 mm: 28 mmweight: 10 kgdimensions: 0,3 x 0,3 x 0,2 mBasic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet 5: 125 pieces, 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 36 x 160511Magnetic bolt 8 x 280740Stop: 12 x 280410.NStop: 12 x 280420.NStop: 4 x 280430.NAngle: 12 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NAngle: 1 x 280144.NAngle: 1 x 280146.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2009 intensità di corrente: 300 Adiametro del filo: 1 mm: sofort einsatzbereit : 239836

Table dimensions: 1200 x 1200 mmtable load: 7000 Kgswivelling range: 105 Gradturning speeds: 0,07 x 0,6 U/minheight adjustment: 1450 - 2450 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 14000 Nmtotal power requirement: 8,2 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this  ...

Table dimensions: 1000 x 1000 mmtable load: 2500 Kgswivelling range: 105 Gradturning speeds: 0,15 - 2,0 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 700 Amperemax. torque on the faceplate: 5000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this ad ...

number: 53 Positionenweight: 45 kgcondition: neu 0Basic set 4 / 53 piecesfor table top thickness 15mm and 25mm6 pcs screw clamps14 pcs. quick clamping bolts2 pcs. universal stop 100mm6 pcs. universal stop 150mm6 pcs. universal stop 225mm2 pcs. universal stop 300mm6 stop and clamping angles 175mm4 stop and clamping angles 275mm2 pcs. prisms 60mm1 piece torch holder1 pc. Eccentric stop 100mm diameter1 piece perforated brush 30mm2 pieces separating lotion 500ml, on a natural, biological basis2 pcs. Welding table cleaner 500ml, on a natural, biological basisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 900 mmtable load: 2000 Kgweight of the machine ca.: 0,24 tdimensions: 1,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 10000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,5 + 3,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 700 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,2 - 2,0 U/min: 900 Nmtotal power requirement: 0,37 / 0,37 kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 800 mmtable load: 1500 Kgswivelling range: 0 - 105 Gradturning speeds: 0,15 - 1 U/minheight adjustment: 672 - 1180 mmhollow spindle diameter: mmwelding current: 500 Amperemax. torque on the faceplate: 3000 Nmtotal power requirement: 0,75 kWdimensions of the machine ca.: 1560x1120x750 mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The dat ...

table length: 2900 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,9 tdimensions: 2,9 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 6 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 12000 Nm0: 1,5 / 2,2 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 2,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 6000 Nmtable pass: 200 mmwelding current: 700 Amperetotal power requirement: 1,1 + 2,2 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmtable load: 5000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1300 - 2050 mmmax. torque on the faceplate: 10000 Nmengine output: 1,5 / 1,5 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corrente di saldatura: 30 - 200 Afrequenza di carico collegata: 230 Vpeso: 3,6 kgDimensioni (LxPxA): 290 x 135 x 2600 mmFornitura: saldatrice TIG Buddy TIG 160Elettrodo e cavo di terra 3mtorcia TIG ET 17 4mTubo del gas con dado a risvolto

corrente di saldatura: 15 - 40 Acapacità di taglio: 1 - 16 mmtensione a circuito aperto: 96 VPressione dell'aria richiesta: min. 4 barcarico collegato: 3,6 kWfrequenza di carico collegato: 230 Vpeso: 9,0 kgDimensioni (LxPxA): 371 x 153 x 232 mmMacchina da esposizione Taglierina al plasma inverter con accessori:Torcia da taglio con cavo da 4 m, morsetto di messa a terra con cavo da 2,5 m, manometrodell'aria, maschera e spazzola.

numero: 24 Peso posizionale: 22 kgcondizione: neu 0Set base 1 / 24 pezziper piano del tavolo spessore 15 e 25 mm4 morsetti, altezza di serraggio 300 mm, proiezionevariabile 8 bulloni diserraggio 2 pezzi arresto 100 mm4 pezzi arresto 150 mm2 pezzi arresto 225 mm1 pezzo portatorcia1 pezzo spazzola perforata 30 mm1 pezzo Lozione separante 500 ml1 pz. Detergente per tavoli di saldatura su base naturale e biologica 500ml