sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 108)
Saldatrice inverter. Adatta per la saldatura con elettrodi rivestiti. Idonea all'uso in ambienti ad alto rischio. Auction-ID: A7-50066-71
Saldatrice inverter. Adatta per la saldatura con elettrodi rivestiti. Idonea all'uso in ambienti ad alto rischio. Auction-ID: A7-50066-271
length: 1050 mmheight: 1450 mmweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 800 mmheight: 650 mmtotal power requirement: 3,7 kWweight of the machine ca.: 75 kgdimensions of the machine ca.: 800 x 330 x 650 mmTechnical SpecificationsContinuously adjustable range [A] 35â270Duty cycle (DC) at Imax. (10 min) [%] 30 (40)Welding current at 100% duty cycle [A] 160Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included accessories: - Hose set- Pressure regulator- Ground cable- Basket coil adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 900 mmweight of the machine ca.: 95 kgdimensions of the machine ca.: 900 x 450 x 850 mmTechnical SpecificationsContinuously adjustable range [A] 35â250Duty cycle (DC) at Imax. (10 min) [%] 40Welding current at 100% duty cycle [A] 170Mains connection [V] 3/PE 400Continuous power at 100% duty cycle [kVA] 5.5Protection class IP 21Included: - Hose set- Pressure regulator- Ground cable- Spool adapterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tensione di ingresso: 230 V~50 Hz Intervallo di corrente di saldatura: 20-330 A Tensione a vuoto: 60 V Corrente assorbita massima: 55 A Corrente assorbita effettiva: 45 A Ciclo di lavoro: 40% 330 A, 100% 202 A Dimensione elettrodo: 1,6-4,0 mm Auction-ID: A7-50066-292
Saldatrice a filo elettronica, modello MIG 400-PL, mai usata Ingombro: 1200 x 800 x 1500 mm Peso: 120 kg Auction-ID: A7-50066-305
La saldatrice a inverter è utilizzata per la saldatura MIG/MAG. La saldatrice utilizza un IGBT ad alta potenza per trasmettere frequenze da 50/60 Hz a 20 kHz. I vantaggi della saldatrice includono, tra gli altri, il risparmio energetico e la possibilità di correzione automatica delle pulsazioni di tensione, bassa formazione di scintille, elevato ciclo di lavoro Auction-ID: A7-50066-186
La saldatrice a inverter è utilizzata per la saldatura MIG/MAG. La saldatrice utilizza un IGBT ad alta potenza per trasmettere frequenze da 50/60 Hz a 20 kHz. I vantaggi della saldatrice includono, tra gli altri, il risparmio energetico e la possibilità di correzione automatica delle pulsazioni di tensione, bassa formazione di scintille, elevato ciclo di lavoro Auction-ID: A7-50066-86
Saldatrice a filo elettronica, modello MIG 400-PL, mai usata Ingombro: 1200 x 800 x 1500 mm Peso: 120 kg Auction-ID: A7-50066-334
current capacity: 25 kVAnumber of controlled axis: 6 workpiece weight: 10 kgweight of the machine ca.: 1550 kgYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 800 mmtable load: 1100 Kgswivelling range: 360 Gradturning speeds: U/minconnected load frequency: 400 Vweight: 3,5 tDimensions (LxWxH): 2,8 x 1,2 x 2,4 mWelding positioner- consisting of a column with RDM 50 slewing ring Typ RDM50- RDM 11 rotary table Typ RDM 11- System without control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 15 mmMaximum Chamfer Lengths / Maximum Chamfer HeightsMaximum chamfer length for steel 400 N/mm² 15 mmMaximum chamfer height for steel 400 N/mm² 10.6 mmMaximum chamfer length for steel 600 N/mm² 9 mmMaximum chamfer height for steel 600 N/mm² 6.4 mmMaximum chamfer length for steel 800 N/mm² 6 mmMaximum chamfer height for steel 800 N/mm² 4.2 mmRadiiMinimum radius 55 mmGeneralWorking speed (max.) 2 m/minRated power consumption 2600 WSheet metal thickness 4 mm - 160 mmDimensionsLength 554 mmHeight 361 mmWeightWeight 16.5 kgTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 25 mmSheet thickness: max. 25 mmMax. bevel length: 10 mm (for steel with a tensile strength of 400 N/mm²)Bevel angle: 30°Power: 2,000 WVoltage: 220 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
usato
Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines
table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height (lateral area): 200 mmweight: 1549 kgdimensions of the machine ca.: 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! SPECIAL OFFER SIEGMUND Retro Welding Table 3000x1500x200, accessories includedSIEGMUND welding table just like 25 years agowith plasma nitriding and modern table legsProduct Description- Table dimensions: 3000x1500x200 mm- High-quality S355J2 N steel with plasma nitriding- Material thickness: approx. 24.5-27 mm- Hole diameter: 28 mm- Holes arranged in a 100x100 mm grid- Corners, edges, and holes chamfered at 45°- Side panel height: 200 mm- Holes in side panels arranged in a diagonal grid- Construction reinforced with ribsPlasma-nitrided version:- Protection against rust, scratches, and weld spatter adhesion- Corrosion-resistant / higher load-bearing capacitySpecifications:- 28-hole pattern / Dimension ...
bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...
table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...
95 € 
