Fabbricante:
(Categoria: 101)
bore capacity in steel (diameter): 40 mmarm length: 1050 mmworkpiece height max.: - mmturning speeds: 15 - 2800 U/minfeed range: 0,075 - 0,45 mm/mindimensions: 2450 x 1300 x 2300 mmWeight: 1500 kgControl: Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design- Work table 1800 x 600 mm with 4T-slots- Boom travel 1050 mm- SK 40 drilling spindle with tool clamping device- Infinitely variable speed programming- Infinitely variable quill feed via three-phase servo motor- 2 T-slots 18 mm on the machine base at the rear- 2 T-slots 18 mm on the left machine base frame- Thread cutting device- Central lubrication- Coolant device- Machine light- CE marking- Safety device- USB interfaceDimensions and travelsTool holder SK 40Column diameter mm 195Table dimensions mm 1800 x 600Number of T-slots 4Distance between T-slots mm 125Quill stroke (Z-axi ...
control: FIDIA PCN 775 : . x-travel: 1000 mmy-travel: 620 mmz-travel: 700 mmAxis: 5 Achsen simultan gesteuertweight: 12 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mmthroat: 250 mmbore stroke: 130 mmmorse taper: 3 MKtable:: 380 x 380 mmturning speeds: 75 - 3200 U/minthread: M16 ST60column diameter: 98 mmengine output: 1,1 kWdimensions: 800 x 500 x 2000 mmweight: 210 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 45 mmthroat: 350 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 560 mmtotal power requirement: 3,4 kWweight: 950 kgdimensions: 1200 x 800 x 2300 mmFeatures:- Automatic feed- Coolant system- Infinitely variable speed control- Adjustable fixed depth stop- Emergency stop foot switch- Drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 170 mm: 4 speeds: 60 - 1600 U/mintable-size: 570 x 480 mmtotal power requirement: 1,6 kWweight: 650 kgdimensions: 1200 x 800 x 2200 mmFeatures:- Automatic feed- Coolant device- Infinitely variable speed control- Adjustable fixed depth stop- Machine light- Drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 380 mmbore stroke: 160 mm: 4 speeds: 60 - 1250 U/mintable-size: - mmtotal power requirement: 3,3 kWweight: 900 kgdimensions: - mmFeatures:-Gear drilling machine with a robust design-Column-mounted drilling table-Right/left rotation-Feed-Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32.0 mm: 35.0 mmbore stroke: 150 mm: M 22 (St 60) throat: 300 mm: 0.1 - 0.2 mm/U: MK 4 : 480 x 480 mm: 80.0 - 1.170 U/min: 0.90 / 1.35 kW: 340 kg: 800 x 1000 x 2000 mm Manufacturers list price: 8.665 EURO Special price on requestEquipment:- Column drilling machine - V-belt drive- infinitely variable speed adjustment- Manual automatic spindle feed- Thread cutting device automatic feed reversal RS for thread cutting- pole-changing drive motor- depth scale and adjustable depth stop- Height-adjustable work table Adjustment with hand crank- Right/left rotation of the drill spindle- Machined machine base incl. coolant device- Machine/work light- Folding drill spindle guard- Emergency stop button at the front- CE marking + instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmthread: M 24 ST60thread: M 30 GG20feed: 0.10 + 0.20 mm/Udistance spindle /table: 117 / 701 mmengine output: 1.0 / 1.6 kWweight: 270 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Inf ...
bore capacity in steel (diameter): 15 mmthroat: 220 mmbore stroke: 80 mm: 2 speeds: 320 - 1600 U/mintable-size: 350 x 285 mmweight: 125 kgdimensions: 700 x 600 x 1500 mmFeatures:- Microdosing- Thread cutting M2-10The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 140 mmx-travel: 2000 mmy-travel: 2000 mmz-axis: 1500 mmspindle stroke - max.: 800 mmspindle taper ISO: 50 table surface area: 1800 x 1500 mmtable load: 15000 kgturning speed range: 2,3 - 810 U/mintotal power requirement: ca. 30 kWweight of the machine ca.: 31000 kgdimensions of the machine ca.: 7300 x 5600 x 4000 mmEquipment:- Faceplate with NC facing slide and NC rotary table- Heidenhain digital readout- Various tool holders- Various clamping devicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1980 tool taper: MK : 205 - 1450 m/min.boring range:: 3 - 40 mm Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 630 mmz-travel: 560 mmtotal power requirement: 60 kWweight of the machine ca.: 12.5 tdimensions of the machine ca.: mH E L L E R (Germany)5 Axis - CNC Controlled Horizontal Machining Centre Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation_______________________________________________________ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mmNC rotary table Tilting A axis 180 ° Turning B axis 360 °Size of pallet, approx. 250 x 620 mmTool holder HSK 63ASpindle speeds, infinitely variable 63 - 20,000 rpmFeeds / quick feeds XYZ 1 - 70,000 mm/minSpindle drive 24 kWTotal electrical load, approx. 60 kW - 400 V - 50 HzWeight, approx. 12,500 kg Accessories / Special Features 5-Axis ...
cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: m: : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope and machine lamp.The data for this ad was created with ModulMWS - ...
x-travel: 760 mmy-travel: 510 mmz-travel: 610 mmtable surface area: 1.020 x 510 mmcontrol: WINMAX spindle turning speed range: 12.000 U/minspindle drive: 13,5 kW: 24 St.tool adaptor: SK 40 | |internal coolant system feed: 20 bar feed: m/minrapid traverse: 35/35/30 m/mintotal power requirement: kWweight of the machine ca.: 5,0 tdimensions of the machine ca.: mused vertical machinig centre with 4th axis - 4th axis- Dual toolchanger- internal coolant with filter- spindle oil cooling- electric hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1695 mmy-travel: 1060 mmz-travel: 1345 mmcontrol: MAZATROL MATRIX 2 Table dimensions: 1000 x 1000 mmtable load: kgturning speed range:: 10000 min-1spindle motor: 37 kWspindle taper: BT 50 tool magazin:: 80 Plätzeworkpiece diameter: 1250 x 1200 mmconnected load: 127 kVAweight of the machine ca.: tdimensions of the machine ca.: 3400 x 7100 x 3379 mm5-axis machining centre- MAZATROL MATRIX 2 CNC control- 2-position pallet changer- Chip conveyor- 80-position tool changer (BT 50)- NC rotary table, 0.0001°-- B-axis: 150° (120° to -30°)- C-axis: 360° (table speed: 500)- Coolant through Spindle- Oil cooler- Air through spindle- Laser measurement (tool)- Renishaw RPMP 600 touch probe- Fixture for angle milling headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 mmy-travel: 1500 mmz-axis: 3000 mmW-axis (spindle longitudinal): mmspindle diameter: 100 mmtable surface area: 1.400 x 1.300 mmtable load: tspindle turning speed range: U/minpower capacity - milling spindle: kWtool taper: MK |dimensions: 6,4 x 3,2 x 3,4 mweight of the machine ca.: 11,0 tused table borer.- some tool holders- turntable with motor- coolant system- facing plate Ø 660The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mmy-travel: 900 mmz-axis: 800 mmW-axis (spindle longitudinal): 500 mmspindle diameter: 90 mmtable surface area: 1.000 x 1.000 mmtable load: 2,5 tspindle turning speed range: 8- 1600 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 |control: Heidenhain TNC 407 dimensions: 4,5 x 3,25 x 3,0 mweight of the machine ca.: 8 tused table borer. retrofitted to CNC Heidenhain TNC 407- some tool holders- turntable with motor- coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindle speeds: 10.000 U/minNC rotary indexing table Ø: 630 mmcontrol: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor.The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C30U | C-30U | C-30 UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Taper MK: 5 Diametro del fuso: 60 mm: JA M/peso minimo della macchina ca.: 1,1 t I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Boring power: 35.0 / 40.0 mmbore capacity in cast iron: 50.0 mmthreading: M 30 bore stroke: 150 mmSize of table plate: 730 x 210 mmCenter of spindle to wall or column: 280 mmSpeed: 80.0 - 1.400 U/mindistance spindle /table: 85 - 755 mmspindle taper MT: 4 MKcolumn diameter: 120 mmfeed: 0.1 / 0.2 / 0.3 mm/Uvoltage: 400 VMotor output: 1.3 / 2.3 KWweight of the machine ca.: 350 kgrange L-W-H: 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features:- Heavy-duty, versatile column drill press- Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots- Automatic spindle feed - Fixed drilling depth stop- Stepless speed adjustment- Pole-changing motor- Thread-cutting device- Quick-release drill chuck with tapered shank - User manual (PDF)The data for this ad was crea ...
x-travel: 1050 mmy-travel: 800 mmz-travel: 560 mmControl: HEIDENHAIN iTNC 530 Tools changer: 30 pos.table-size: 950 mmturning speeds: 28000 U/minoutput: 55/43,5 kwtaper: HSK A 63 a-axis: -10º/+110º °c-axis: 360 °Internal cooling system: 10 - 80 bartable load: 800 kgtotal power requirement: 80 kVATotal weight, approx.: 13 tdimensions of the machine ca.: 3,6 x 3,8 x 3,18 m5-axis machining centre DMG-MORI HSC 105 linear- CNC control Heidenhain TNC 530- Tool changer 30-fold (HSK A63)- NC rotary table2606h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cilindrata in acciaio (diametro): 50 mm golo: 400 mm corsa: 250 mm di diametro: 4 MKdimensione del tavolo: 705 x 580 mm di avanzamento: 0,1 - 0,2 - 0,3 - 0,4 mm/Velocità di inversione: 60 - 1205 U/minimo potenza totale: 4,0 KWpeso della macchina ca.: 0,85 tDimensioni: 1,2 x 0,8 x 2,55 mMacchina da perforazione a colonna con:- Alimentazione elettrica - Rotazione sinistra/destra - Pompa del liquido di raffreddamento - luce della macchina I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Manufacturer: Toyoda (machining centers), Palltec (RGV) Type of System: Horizontal machining centers with matrix tool magazines and RGV pallet handling Year of Manufacture: 2006 to 2008 MACHINING CENTERS Toyoda 1 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 72,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 2 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 70,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 3 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 76,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 4 - Type: FH 630 SX - Year of Manufacture: 2008 - Control: Fanuc 31i - Spindle running time: approximately 65,000 hours - Tool magazine: Fanuc FTS3 ...
x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmTable dimensions: 1300 x 600 mmtable load: 1,0 ttool taper: ISO 40 DIN 69871Aspindle turning speed range: 60 - 12000 U/minrapid traverse: 32 m/minpower capacity: 10 / 17 kWno. of tools in the magazine: 32 Stücktool length - max.: 300 mmTool diameter: 76 / 127 mmweight of tools max.: 8 kgtool changing time: 2,5 sectotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmMachine with only 3.275 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2165 mmy-travel: 1600 mmz-travel: 1345 mm: 2300 mmTurning Speed of the Rolls: 2300 x 1684 mm: 7000 kgnotching width: 300 1/min: 0,0001 °Positioning speed: 10000 1/min: 37 /30 kW: 150 °Feeds (X,z,u,w-axis): 0,0001 (360°) °: ISO 50 : 42 Control: Mazatrol Smooth X Rapid Travel X / Y / Z-Achse: 42 m/mintotal power requirement: 141 kVAweight of the machine ca.: 51,5 tdimensions of the machine ca.: 4,4 x 5,2 , 7,8 m5-axis multitasking machine featuring:- Mazatrol Smooth X CNC control- Direct-drive table with C-axis accuracy of 0.0001°- Milling spindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1100 mm: 650 mm: 610 mm: 1200x6000 mm: BBT 40 : 12.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mmy-travel: 460 mmz-travel: 460 mmcontrol: TNC 620 HeidenhainMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 14 / 10 kWTorque: 89 / 63,7 Nmtool taper: SK 40 work table:: table surface area: 900 x 410 mmmax. table load: 350 kgT-slots: 4x Tool-Presetter:: number of toolpositions: 24 pos.max. tool diameter: 130 mmmax. tool length: 200 mmmax. tool weight: 8,0 kgfeeds:: rapid traverse ( X / Y / Z ): 36 m/mintotal power requirement: 20 kVAweight of the machine ca.: 3,3 tdimensions of the machine ca.: 3,0 x 2,5 x 2,9 mDocuments: digital Chip-Tray: Automatic Tool Changer: Coolantsystem: interface 4. axis: work light: test probe: Blum TC 50 elektr. hand wheel: integriert / integratedTailstock: TTS-125 indexing attachment: CNC Machiningcenter VerticalSPINNER - VC 750The data for this ad was created with ModulMWS - the soft ...
x-travel: 2600 mmy-travel: 1100 mmz-travel: 920 mmtool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kWweight of the machine ca.: 26,1 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 (875) mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC 430 turning speeds: 20-7.000 U/minfeed: 0-15.000 mm/mintool change unit: 16-fach rapid power traverse in X-and Z direction: 15 m/mintool taper: SK 40 table surface area: 900 x 528 mmmax. table load: 400 kgspindle diameter in front bearing: 55 mmswivellable: 0-90 °quill stroke: 75 mmspindle hours: 9.546 htotal power requirement: 12/7,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 4 x 3,6 x 2,2 mHERMLE U 630T 3-axis machining centre, built in 1999The X-axis, with a stroke of 630 mm, can be extended to 875 mmby swivelling the tool changer out of the way.Accessories:Tool holders, see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
