torni usati in vendita (3,037)

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 mIncludes 4-jaw chuck 200 mmIncludes 3-jaw chuck RÖHM 200 mmIncludes Multifix quick-clamping system with 3 cassettesIncludes coolant pump with reservoirIncludes various turning tool holdersIncludes various small parts and centersThe electric motor is a bit loud and should be re-gilled if necessary.Otherwise, the gearbox runs quietly and the guides have no grooves, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di rotazione: 475 / 260 mm lunghezza di rotazione: 1000 mm) controllo: Heidenhain Manual Plus testa torretta: 12 x VDI 30 consumo totale di potenza: 25 kWweight della macchina ca.: 3 tdimensioni della macchina ca.: 2,51,52 m I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura sul letto: 500 mmdiametro di tornitura sul supporto della slitta: 320 mmlunghezza di tornitura: 2100 mmaltezza del centro: 250 mm: mmforo del mandrino: 60 mmgamma di velocità di tornitura del mandrino: 11 - 2000 U/minpotenza totale richiesta: 7,0 kWpeso della macchina ca.: 2,9 tdimensioni della macchina ca.: 4,3 x 1,2 x 1,3 mmTorni con:- Portautensili a 4 posizioni- Mandrino a 3 griffe 315 mm- Punto di centraggioI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura sul letto: 430 mmdiametro di tornitura sul supporto della slitta: 250 mmlunghezza di tornitura: 1000 mmaltezza del centro: 215 mminterasse: 1000 mmforo del mandrino: 56 mmgamma di velocità di tornitura del mandrino: 19 - 2000 U/minpotenza totale richiesta: 7,5 kWpeso della macchina ca.: 1,9 tAccessori: mandrino a 3 griffe 250 mmø, portautensili a 4 poli, solido fissoI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura sul letto: 460 mmlunghezza di tornitura: 1250 mmaltezza del centro: 230 mminterasse: 1250 mmgamma di velocità di tornitura del mandrino: 35 - 1800 U/minpeso della macchina ca.: 2,7 tAccessori: mandrino a 3 griffe 250 mmø, testa MULTIFIX con 3 inserti, solido stabileI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 310 mmturning length: 600 mmcontrol: Sinumerik 810 D PL Siemensturning diameter over bed: 425 mmMain spindle: turning speed range - main spindle: 500 - 4.500 min/-1max. Torque: 280 Nmpower capacity - main spindel: 16,5 kWSpindle diameter: 100 mmC-Axis: 360 °chucking diameter: 210-52 mmspindle bearing diameter: 120 mmclamping cylinder: 65 mmBar feed: max. 65 / (52) mmspindle nose: A8 DIN 55026axis stroke:: x-axis: 230 mmz-axis: 740 mmrapid traverse X-axis: 15 m/minrapid traverse Z-axis: 24 m/minturret:: tool positions turret: 12 pos.driven statition: 12 pos.tool taper: VDI 30 DIN 69880Spindle speed driven tools: 6.000 min -1power capacity - driven tools: 3,7 kWmax. Torque: 9,5 Nmtail stock: dia. of quill: MK 4 80 mmquill stroke: 120 mmtailstock adjustment: 475 mmtension force: 500 daNtotal power requirement: - kWweight of the machine ca.: 4,2 tdimensions of the mach ...

diametro di tornitura sul letto: 360 mmdiametro di tornitura sul supporto della slitta: 180 mmlunghezza di tornitura: 900 mmgamma di velocità di tornitura: 25 - 1600 U/minpotenza totale richiesta: circa 3 kWpeso della macchina ca.: 1,5 tdimensioni della macchina ca.: 2,5 x 1 x 1,5 mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 340 mmturning length: 600 mmturning diameter over slide: 300 mmcontrol: Siemens 840 D spindle passage: 55 mmspindle nose: ASA 6 number of spindle speeds: 4000 U/minspindle motor: 27 kWNumber of tools: 12 VDI 40driven stations: 12 VDI 40speed of driven tools: U/minpower of driven tools: kwrapid traverse: 30 m/minSpindlespeed subspindle: U/minpower sub spindle: 15 kwrange L-W-H: mweight of the machine ca.: tCNC- lathe with driven tools an subspindleDriven toolstation cannot be used due to cable breakage- chip conveyor- sub spindle- driven tool stations (not working)- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 555 mmturning length: 3000 mmcontrol: Monforts Control System type: MTC-K CCUOturning diameter over slide rest: 290 mmcross movement: . mmspindle passage: . mmturning speeds: 1600 U/mintransmission ratio: . quill stroke: . mmrapid traverse: . m/minmain drive motor: . kW3-jaw chuck: Rotha-S Plus 3-jaw-chuck diameter: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling  ...

diametro di tornitura: 200 mmlunghezza di tornitura: - mmcontrollo: DMG potenza totale richiesta: kWpeso della macchina ca.: 5200 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

diametro di tornitura: 246 mmlunghezza di tornitura: 445 mmcontrollo: Fanuc 32 potenza totale richiesta: kWpeso della macchina ca.: 4250 kgdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter: 830 mmswing diameter: 920 mmturning height: 750 mmcontrol: Fanuc 0i-TF travel -x axis: 495 mmtravel -z axis: 780 mmturning speed range - spindle: 1940 U/mindrive capacity - spindle motor: 37 / 30 kWchucking diameter: 380 mmturret (x-stations): 12 posrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 20 m/minfeed: mm/minspindle diameter in front bearing: 160 mmc-axis: 360° (in 0,001°) workpiece weight: 870 kgtotal power requirement: 61,78 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 2,1 x 2,7 x 3,6 m- Control unit FANUC 0i-TF- Tool Turret 12-fold- Coolant system- Foot switch- Automatic safety switch Front door & full enclosure- Work area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 82740 €: 1563.79 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 M: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FU ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 940 mmturning length: 6000 mmcentre distance: 6200 mmspindle speed:: 1.6-315 U/mintailstock quill diameter: 200 mmworkpiece weight: 30 tworkpiece weight max.: 40 tsteady: 3 digital readout: total power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: 11x2,4x1,9 mdrive motor: 75 kWThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forw ...

turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mmpower capacity at 100 % load: 25,20 kWpower capacity at 40 % load: 30,20 KWmax. torque at 40% / 100% load: 180 / 135 Nmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minworktool support: No. 1 x-axis: 290 mmy-axis: 165 mmz-axis: 600/950 mmB - axis: 360 °rapid traverse X/Y/Z: 18 / 18 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNnumber of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mmtoolpiece turning speed range: 8.000 / 2.000 U/minpower capacity at 25 % load: 5,80 kWmax. torque at 25% load: 4x18,6 / 4x74 Nmtool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mmz-axis: 600/950 mmy-axis: +/- 60 mmrapid traverse X/Y/Z: 18 / 15 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNtool turret - number o ...

turning diameter: 340 mmturning length: 300 mmbar material dia.: 65 mmcontrol: FANUC Main Spindle:: spindle speed:: 4500 min-¹spindle motor: 11 / 15 kWc-axis: 0,001 °travel -x axis: 227,5 mmtravel -z axis: 320 mmy-axis: +/- 41 mmtail stock: tailstock quill stroke: 80 mmtailstock adjustment: 200 mmLive Tools: work piece power: 5,5 / 3,7 kWtoolpiece turning speed range: 6000 U/mintotal power requirement: 24 kVAdimensions of the machine ca.: 1,65 x 1,65 x 1,85 mmTotal weight, approx.: 3200 kgCommissioned in 2015- FANUC CNC control- Chuck diameter: 315 mm- C-axis with spindle brake- 12-station tool turret with driven tools- 3.2 m bar feeder- Tailstock MK 4- Set of tools- Set of spare parts (all linear guides, covers)12,000h operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning dia. in gap: 400 mmturning length: 600 mmcentre distance: 750 mmspindle turning speed range: 20 - 1000 U/minspindle bore: 25 mm3-jaw chuck: Röhm, Ø 200 mmdimensions of the machine ca.: 2000 x 800 x 1500 mmweight of the machine ca.: 1200 kgFixed bezelTurning bezelTurning center pointThree-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jawsQuick-change tool holder Original Multifix size B with 2 change holdersSpindle brakeTailstock quill MK3Machine feetLathe chuck guardChip guardWork lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mmturning length: 1000 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 1090 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 5000 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 80 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmspindle distance: 1005 mmtotal power requirement: 43 kVAWeight: 6,65 tdimensions of the machine ca.: 5,6 x 1,95 x 1,9 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 10-- Counter: 6- Chip conveyor- Coolant system- Extraction systemThe data for this ad was c ...

turning diameter over bed: 1020 mmturning diameter over slide rest: 660 mmturning length: 5000 mmmin./max workpiece dia.: 210 - 880 mmspindle diameter: 115 mmspindle taper: 140 spindle turning speed range: 5 - 500 U/minfeeds - longitudinal: 0,20 - 3,05 mm/Ufeeds - cross: 0,07 - 1,04 mm/Uslide adjustment: longitudinal: 5000 mmcross: 680 mmworkpiece weight: 5000 kgmain drive motor: 22 kWthread - mm pitch: 1 - 120 mmthread - module: 0,5 - 30 thread - inch: 28 / 1/4 spindle bore: 84 mmtail stock: tailstock quill taper MT: 5 tailstock quill stroke: 300 mmtotal power requirement: 27 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: 6,5 x 2,2 x 1,8 m- 1 fixed bezel- Faceplate Ø 1000 mm- 4-fold steel holder- Tailstock- 2-track bed designThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2000 mmturning length: 5000 mmturning diameter over slide rest: 1050 mmturning diameter over bed: 2000 mmfaceplate diameter max.: 1200 mmspindle turning speed range: 1,6 - 250 U/minmain drive motor: 110 kWmax. workpiece weight between centres: 25 tworkpiece weight max.: 40 tcentre height: 700 mmswing diameter max. over bed cover: 1140 mmmax.workpiece weight:each extra steadyrest: 3000 kgtotal power requirement: 120 kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- Face Plate Ø 1200 mm- Coolant- Rapid travel- Tail stock mit Face PlateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop button- Operating instructionsThe data for thi ...

turning diameter: 320 mmturning length: . mmcontrol: Siemens type: . CCUOturning diameter over slide rest: . mmcross movement: . mmspindle passage: . mmturning speeds: . U/mintransmission ratio: . quill stroke: . mmrapid traverse: . m/minmain drive motor: . kW3-jaw-chuck diameter: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look for ...

turning diameter: . mmturning length: . mmcontrol: Mazatrol type: . .turning speeds: . U/minspindle passage: . mmTool changer: . Pos.Spindle capacity: . KWcentre distance: . mmx-travel: . mmz-travel: . mmtotal power requirement: kWweight of the machine ca.: 4,75 tSuper Quick TurnThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the sof ...

turning diameter: . mmturning length: . mmcontrol: . type: . CCUOturning diameter over slide rest: . mmcross movement: . mmspindle passage: . mmturning speeds: . U/mintransmission ratio: . quill stroke: . mmrapid traverse: . m/minmain drive motor: . kW3-jaw-chuck diameter: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to  ...

turning diameter: 650 mmturning length: 2042 mmcontrol: FANUC 0iT greates pass round over bed: 900 mmswing diameter over slide rest: 690 mmmax. turning diameter: 650 mmspindle turning speed range: 1500 U/minspindle drive motor: 45 / 37 kWspindle nose: A1-15 bar material dia.: 165,5 mmNumber of tools: 12 St.travel -x axis: 362 mmtravel -z axis: 2155 mmtail stock: tailstock adjustment: 1000 mmdiameter of quill: 120 mmquill stroke: 120 mmmax. workpiece weight -without tailstock: 1400 kgworkpiece weight max.: 2600 kgRapid Travel X / Y / Z-Achse: 16 / - / 20 m/mintotal power requirement: 60,25 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 5,98 x 2,5 x 2,88 m- Fanuc F0i CNC control- 21 chuck- 12-station turret- MT 6 tailstock- Chip conveyor- 1 steady rest- 1 tool measuring arm- 14.5 bar coolant system- Oil separator- Chip conveyor- Programmable tailstock- Plate for manual  ...

control: MAZAK Mazatrol Nexus swing over bed: 675 mmswing diameter over bed slide: 380 mmturning length: 538 mmc-axis: indexing: 0.001 °turning speeds: 35-5000 U/mintool taper: DIN A2-6 y-axis: mmrapid traverse X-axis: 30 m/minrapid traverse Z-axis: 33 m/minOverall size: 4500 x 2000 x 1600 mmy-axis: mmweight of the machine ca.: 6.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed width: 220 mmdaylight: 130 mmcentre height: 240 mmdimensions of the machine ca.: 0,5 x 0,3 x 0,15 mweight: ca. 20 kgAdditional lynette available upon request - Photo 2.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.