torni usati in vendita (3,037)

turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mmturning length: 2.000 mmcontrol: FAGOR 8055 turning diameter over slide: 470 mmfeed: 8 m/minspindle nose: DIN-55027-11 spindle passage: 104 mmnumber of spindle speeds: 0-1600 U/min/rpmspindle drive: 17/ 20.5 kWTorque: 1590/1920 Nmtotal power requirement: 28 kWweight of the machine ca.: 4.9 tdimensions of the machine ca.: 6.600 x 2.300 mmTailstockTailstock quill diameter: Ø 100 mmTailstock quill travel: 200 mmTailstock quill taper: Morse taper MT 6Turret4-position automatic turretMachine EquipmentFull rear protection enclosureHydraulic 3-jaw chuck SMW AUTOBLOCK 400 GHFixed steady rest, capacity 50–220 mmMaximum Permissible WeightsMax. workpiece weight between centers: 2,560 kgWith 1 steady rest / with 2 steady rests: 3,200 kg / 4,000 kgFree-standing, center of gravity at 250 mm: 800 kgThe data for this ad was created with ModulMWS - the software solution of Lo ...

centre height: 280 mmcentre distance: 1200 mmturning diameter over bed: 570 mmturning diameter over slide: 365 mmturning length: 1000 mmspindle taper: DIN 55027 Gr. 8control: Sinumerik 810 D SIEMENSbed width: 360 mmspindle bore: 62 mmturning speed range: 3 - 2500 U/minfeed:: 5000 mm / minrapid travel - longitudinal/face: 10 m/min3-jaw-chuck diameter: 250 mmquick change toolholder: SANDVIK Coromant Captodrive capacity - spindle motor: 25 kWtaper in tailstock-quill: MK 5 dia. of quill: 100 mmquill stroke: 190 mmcoolant: voltage: 400 Vweight of the machine ca.: 5,0 tdimensions of the machine ca.: 3,55 x 2,20 x 1,95 m- Serial No.: 2022-3742-03- CNC-Control SIEMENS Sinumerik 810 D- Rapid feed- Coolant equipment- Machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 840 mmturning diameter over slide rest: 640 mmturning length: 3300 mmspindle bore: 74 mmturning speeds: 7,1-1400 U/min3-jaw chuck: 315 mmsteady: rapid traverse: turning dia. in gap: 920 mmlength of gap: 370 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward t ...

turning diameter over bed: 3800 mmturning diameter over slide rest: 3200 mmturning length: 12000 mmfaceplate diameter: 3100 mmsteady: 2 bed width: 4000 mmturning speeds: 200 U/minworkpiece weight: 90.000 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHydrostatik SpindellagerungHydrostatik LynetteThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 6000 mmspindle bore: 82 mmturning speeds: 4,5-900 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: rapid traverse: total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsc ...

turning diameter: 1600 mmturning length: 6200 mmcontrol: Siemens type: Sinumerik turning diameter over slide rest: 1300 mmtransmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mmbed width: 750 mmlive tooling: steady: 1200 mmsteady: 670 mmsteady: 408 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 262/01Machine number: 08122394Quick-change tool postCoolant systemMonitorChip conveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us ...

turning diameter over bed: 1450 mmturning diameter over slide rest: 1000 mmturning length: 8000 mmspindle bore: 160 mmturning speeds: 2,8-560 U/minfaceplate: 1400 mm3-jaw chuck: mmbed width: 850 mmturning diameter in the gap: 1800 mmlength of gap: 600 mmsteady: 1070 mmsteady: 1070 mmdigital readout: Rapid travel: chip conveyor: kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 2750 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 turning diameter in the gap: 1400 mmlength of gap: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...

turning diameter over bed: 1200 mmturning diameter over slide rest: . mmturning length: 5000 mmdigital readout: Digitalanzeige centre height: 600 mm: 55 PS spindle turning speed range: 5-1000 U/minRapid movement: längs 4000 mm/minaccessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kgWeight with Lynette: zwischen Spitzen 11500 kgRapid movement: quer 2000 mm/mintotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, p ...

turning diameter over bed: 2200 mmturning diameter over slide rest: 1650 mmturning length: 6000 mm0: 75 kWcoolant: spindle turning speed range: 2,8-600 U/minspindle bore: 102 mmHeight of centres: 1100 mmaccessories:: Planscheibe, Futter accessories:: Lynetten total power requirement: kWweight of the machine ca.: 45 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Ma ...

turning diameter: 270 mmturning length: 630 mmcontrol: SIN840D swing over bed: 400 mmswing diameter over slide rest: 220 mmlongitudinal slide -travel: 745 mmcross slide - travel: 200 mmturning speeds: 10 - 4.000 U/minpower capacity at 100 % load: 15,00 kWspindle head DIN 55026 - Size: 6 spindle bore: 62 mmchucking diameter: max. 315 mmfeed x-axis: 1 - 12.000 mm/minrapid traverse X-axis: 12,00 m/minFeed z- axis: 1 - 20.000 mm / min.rapid traverse Z-axis: 20,00 m/mintailstock quill taper MT: 3 quill stroke: 112 mmquill pressure: 10,00 kNtool turret with 12 work positions: tool taper DIN 69880: Ø 30 mmTool drive speed max.: 4.000 1/mintotal power requirement: 37,00 kWweight of the machine ca.: 4,00 tdimensions of the machine ca.: 4,00 x 2,75 x 2,30 mWith SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.The data for thi ...

turning diameter: 410 mmturning length: 1280 mmcontrol: Fanuc 32i-B turning diameter over bed: 750 mmturning diameter over cross slideways: 480 mmmain spindle:: max. turning speeds: 3500 min/-1Drive power - main spindle: 22/18,5 kWmax. torque: 493,2/414,7 Nmmax. rod diameter: 76 mmspindle bore: 95 mmchucking diameter: 250 mmtool turret:: number of tool places: 12 Pos.shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 290 mmz-axis: 1350 mmfeeds:: rapid traverse: x 20 / z 24 m/minspindle hours: ca. 426 htotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mEquipped with:- Fanuc 32i-B CNC control- Tailstock (MT 5)- C axis- 12-station tool turret- 2+2 rotating tools- Workpiece catcher- Chip conveyor- Operating hours: 6310h Running hours: 2587hThe data for this ad was created with ModulMWS - the sof ...

swing diameter: 560 mmturning length: 800 mmcontrol: C200-4D Siemens 840 DMain spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1bar capacity: 90 mmspindle diameter in front bearing: 140 mmturning speed range - spindle: ~ 3.500 U/mindrive capacity - spindle motor: 100% / 40%: 43 / 57 kWTorque: 275 / 363 NmIndexing: 2,5 °C-Axis: 0,001 °turret:: Number of Turrets: 1 number of toolpositions: 12 pos.Spindle speed - driven tool stations: ~ 6.000 min -1power capacity - driven tool-stations: 11 kWtool taper: 40 x 63 mm DIN 69880Torque: 21,5 Nmtravel -x axis: 300 mmtravel -z axis: 800 mmrapid traverse: X/Z: 30 / 22,5 m/minfeed power: X: 7.200 Nfeed power: Z: 9.000 NTailstock:: dia. of quill: 65 mmCone: SK 30 longitudinal travel: 800 mmrapid traverse: 10 m/mintotal power requirement: 51 kVAweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 7,3 x 4,0 x 2,6 mChip conveyor: Co ...

turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di rotazione: 250 mmLunghezza di rotazione: 555 mmControllo FANUC 18i-TB mandrino Intervallo di velocità di rotazione: 50-4500 + 5000 U/testa della torre: 2x 24 12 angetriebenDimensioni (L/W/H): 8000 x 2300 x 2400 mm, peso della macchina ca.: 7,5 tY- e B- assi. Vari. accessori più dettagli su www.marcels-maschinen.ch I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

: 0390 mm: 1250 mm: : 54 mm: 270 mm: 60-1000 U/min : D1-6 DIN 55029 : 58,5 mm: 120 mmcentre distance: 1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 800 mmswing diameter: 1050 mmturning height: 755 mmcontrol: Siemens 840D travel -x axis: 625 / 80 mmtravel -z axis: 630 mmworkpiece height max.: 720 mmmax. workpiece weight: 2500 kgShank diameter: 40 x 40 mmtransmission ratio 1: 4 - 100 U/mintransmission ratio 2: 16 - 400 U/mindrive capacity - spindle motor: 40 kWrapid traverse: 8 m/minturning speed range - milling: 1 = 8,5 - 350 U/min: 2 = 26 - 1070 U/min: 3 = 80 - 3312 U/mintotal power requirement: 53 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 4,9 x 4,4 x 4,5 mequipped with:- CNC control Siemens 840D- C-axis- tool changer 12-fold (driven tools)- complete enclosure- chip conveyor- coolant systemonly approx. 800h running hours per yearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 375 mmturning diameter over bed: 1030 mmturning length: 1750 mmspindle bore: 375 mmmax. turning diameter: 650 mmspindle turning speed range: 5- 500 U/minspindle motor: 45 / 37 kWControl: OSP P300 L x-travel: +330 / -140 mmz-travel: 2040 mmrapid traverse x + z axis: 5 / 10 m/mintail stock: tailstock quill diameter: 180 mmtailstock quill stroke: 200 mmtaper in tailstock MT: MT 6 total power requirement: kWweight of the machine ca.: ca 23 tdimensions of the machine ca.: 7,1 x 3,2 x 2,85 mCnc Oil Country LatheCNC-controlled oilfield latheFor heavy-duty machining of large and heavy turned parts andpipe end machining- CNC Control OSP P300L- Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.)- Tool Revolver 12-fold (static Tools)- Chip Conveyor- ExhausterPower on: 20.538h , N/C Running Time: 2.270hSpindle Revolution Time: 2.287h, Cutting Time: 1.691hThe data ...

turning diameter over bed: 460 mmturning diameter over slide rest: 280 mmturning length: 1000 mmcentre height: 230 mm: 720 mmspindle bore: 53 mmspindle turning speed range: 28 - 1250 U/mintotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,4 x 1,4 x 1,75 mmLathes with:- Digital display- Quick-release tool post- 3-jaw chucks (200 mm and 160 mm)- Chip tray- Centering centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di torno: --- mmLunghezza di torning: --- mmControllo: --- Consumo totale di potenza: --- kWweight della macchina ca.: --- Dimensioni della macchina ca.: --- mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

faceplate diameter: 6300 mmswing diameter: 7000 mmturning height: mmram adjustment: mmcross rail adjustment - vertical: mmram head - cross travel: mmram swivable +/-: °main drive: kWtable revolutions:: 0 - 14 U/mnworkpiece weight: 75 /125 tram head dimension: mmtotal power requirement: 170 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 10 x 10 x 7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 356 mmturning length: 705 mmcontrol: M730 UM Mapps CELOSgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bore: 80 (91) mmC-Axis: 0,001 °Subspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle bore: 43 mmC-Axis: 0,001 °axis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1power capacity - driven tools: 5,5 / 4,2 kWtotal power requirement: 41 kVAweight of the machine ca.: 6,4 tdimensions of t ...

working diameter: max. 32 mmspindle passage: 36 mmturning length: 320 mmControl: MITSUBISHI MELDAS 635LCtravel max.: (X1) 108 mmtravel max.: (Y1) 275 mmtravel max.: (Z1) 325 mmtravel max.: (X3) 238 mmtravel max.: (Z3) 410 mmmain spindle speeds:: 200 - 8000 U/minc-axis: 0,001° deg.Subspindle spindle speeds: 200 - 7000 U/minc-axis: 0,001° deg.rapid traverse: 20 m/minmain drive: 3,7 / 5,5 kWSubspindle motor: 1,5 / 2,2 kWdimensions of machine: 2,77 x 1,24 x 1,79 mtotal power requirement: kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: mCNC Swiss-Type LatheFirst put into operation December 2005The machine was used for a single shift and is in good condition with no maintenance backlog.Equipment:FMB Turbo 5-42/3200C bar loader, built 2004High-pressure pumpMany collet chucks for main spindleVarious colletsDrive unit for synchronously driven guide bushSynchronously dri ...

turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

multifix: JA distanza centrale: 1500 mm documentazione: JA peso della macchina ca.: 3 t I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.

turning diameter over bed: 1030 mmturning diameter over slide rest: 800 mmturning length: 3200 mmturning diameter: 900 mmcontrol: FANUC 31i B : 165 mmspindle cone: ASA A1-15 travel -x axis: 470 mmtravel -z axis: 3235 mmrapid travel - longitudinal/face: 12 / 10 m/minMeasuring Speed: 3 - 1500 1/minspindle drive: 45 / 37 kWmax. workpiece weight between centres: 7300 kgmax.workpiece weight:each extra steadyrest: 1600 kgtail stock: tailstock adjustment: 3135 mmtailstock quill diameter: 160 mmtailstock quill stroke: 150 mmtailstock quill taper MT: 6 total power requirement: 64,44 kVAweight of the machine ca.: 22 tdimensions of the machine ca.: 7,36 x 2,77 x 2,78 mHigh-precision turning centre- 3-jaw chuck dia. 800 mm- FANUC 31iB CNC control- Tailstock- Hydraulic steady rest- 12-station tool turret (32 x 32 mm)- Chip conveyor- Coolant system- Tool setter- CEThe data for this ad was created wit ...

greates pass round over bed: 810 mmswing diameter over face slide: 560 mmcentre distance: 2000 mmbed width: 480 mmslide valve travel: 400 mmupper head travel: 180 mmturning tool - shaft cross cut: 32 x 25 mmpower capacity: 22 kWmax. torque on the spindle: 3200 Nmspindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mmspindle bore: 106 mmturning speed range: 9 - 1800 U/minturning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/Uface feeds: 0,046 - 20 mm/Umetric threading: 0,5-112 mminch threading: 1/4 - 56 G/1thread - module: 0,125 - 28 mmthread - DP: 1 - 224 Pitchtailstock quill diameter: 115 mmquill stroke: 225 mmtaper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kgmax. workpiece weight -without tailstock: 750 kg3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mmweight: ca. 4300 kgNumber of feed stages and threads: 99Accessories:3-axis digita ...

turning diameter over bed: 710 mmturning dia. over face-slide: 420 mmturning length: 2000 mmcontrol: Manual Plus 3110 Heidenhainspindle bore: 92 mmmain spindle speeds:: 16 - 1800 U/mincross movement: 385 mmspindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 140 mmpower capacity at 100 % load: 22,00 kW: 2750 Nmfeed x/z-axis: 1 - 5000 mm/minrapid traverse X-axis: 6,00 m/minrapid traverse Z-axis: 8,00 m/mintailstock quill taper MT: 5 quill stroke: 210 mmdiameter of quill: 110 mmtotal power requirement: 40,00 kWweight of the machine ca.: 5,60 tdimensions of the machine ca.: 5,00 x 3,00 x H2,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.