Fabbricante:
(Categoria: 706)
Caratteristiche: Altezza totale 1411 mm Diametro 700 mm Peso 80 kg Descrizione Pressione di esercizio: +2,0 bar Piastra del cuscino/ Interno Permesso. Pressione operativa: +3,0 bar/ +2,0 bar Pressione di prova: +5,1 bar/ +3,4 bar Permesso. Vuoto di funzionamento: -0,15 bar/ -0,15 bar Temperatura di funzionamento consentita: +80/-10°C/ +130/-10°C Materiale: V2A - AISI 304, 1.4301 Superficie: sottaceto, passivato e neutralizzato Terreno superficiale: - Corona di impilamento stabile - Coperchio tombino rotondo da 400 mm con 2 manici x - Ugello saldante DN 50 (tappo cieco DN 50 per un costo aggiuntivo) - 1 x valvola di scarico di pressione - 1 x valvola di aerazione CO2 - 6 x viti a testa a stella Fondo del cilindro: - Con guaina di raffreddamento - Collegam ...
Caratteristiche Volume 6000 L Materiale n. V2A Superficie marmorizzata all'esterno Altezza totale 2000 mm Profondità: 3000 mm Larghezza 1200 mm Numero di piedi 4 Descrizione Terreno superficiale: Fondo battacchio Boccola filettata DN50 - Mitte 2 x occhio a gru Cilindro: Indicatore di livello Tombino 340 x 440 Aletta dell'ugello Uncini a scala Manicotto dell'albero a immersione per termometro Sottocarrozzeria: Fondo battacchio tubo di scarico residuo tirato in avanti con valvola a disco DN40 4 piedi
Caratteristiche: Volume 6000 L Materiale n. V2A Superficie marmorizzata all'esterno Altezza totale 2000 mm Profondità: 3000 mm Larghezza 1200 mm Numero di piedi 4 Descrizione Terreno superficiale: Fondo battacchio Boccola filettata DN50 - Mitte 2 x occhio a gru Cilindro: Piastra fredda Indicatore di livello Tombino 340 x 440 Aletta dell'ugello Uncini a scala Manicotto dell'albero a immersione per termometro Sottocarrozzeria: Fondo battacchio tubo di scarico residuo tirato in avanti con valvola a disco DN40 4 piedi
Numero di catalogo: 26-0064 Caratteristiche Volume 1000 L Materiale n. V2A Superficie esterna IIID Superficie all'interno dell'IIID Altezza totale 1845 mm Altezza del cilindro 1250 mm Diametro 1130 mm Peso 184 kg Descrizione Terreno superficiale: Fondo battacchio Presa filettata DN50 Tombino Connettore CIP Collegamento con la camera d'aria DN50 Cilindro: Camicia di raffreddamento Isolamento Indicatore di livello Campione di puntinata DN25 Manicotto dell'albero a immersione per termometro Sottocarrozzeria: Tubo di scarico residuo tirato in avanti con valvola a disco DN50 4 piedi
Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, ...
Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data Manufacturer: O+H / KHS Model: Hansacan can filler Seamer: Ferrum can seamer, F 505 G Year of manufacture: filler 1992, seamer 2010 Machine typ ...
Overview This crate palletizing and depalletizing line was integrated in 2006 by Profipack Verpackungsmaschinen GmbH (Austria) around two Yaskawa Motoman NX100 articulated robots - one palletizing cell and one depalletizing cell - together with a Logipack vertical pallet strapper. It is still installed at a German brewery, where it palletized and depalletized crates for beer, CSD and mineral water production until the whole line was stopped. Because it served multiple product lines, it handles a wide variety of crate formats on Euro pallets. The machine can be visited on request. Technical data Manufacturer / integrator: Logipack (vertical strapper), Profipack Verpackungsmaschinen GmbH (system integrator, Austria) Robots: 2x Yaskawa Motoman NX100 articulated robots (palletizer + depalletizer) Year of manufacture: 2006 Machine type: crate palletizing and depalletizing line Capacity: 33,00 ...
Disponibilità: immediatamente Tipo: 90 Dimensioni della macchina (LxAs-A): 2,5 x 2,5 x 2,2 m Peso: 4000 kg Documentazione tecnica: disponibile Macchina per l'etichettatura completamente automatica Krones Prontomatic BR720-12-480-6-4-180 Tipo 90: Capacità: 16.000 bottiglie/ora Bottiglia n. 1: 1,0 l bottiglia VDF Diametro: 89,5 mm Altezza: 306,5 mm Etichetta della carrozzeria: 120 x 98 mm Altezza adesiva: 27 mm Etichetta sul petto: 92,5 x 44 mm Altezza adesiva: 183 mm Retro etichetta: 75 x 90 mm Altezza adesivo: 27 mm Bottiglia n. 2: 0,7 l di bottiglia VDF Diametro: 77,5 mm Altezza: 286,5 mm Etichetta della carrozzeria: 120 x 98 mm Altezza adesiva: 30 mm Etichetta di covata: 82,5 x 44 mm Altezza adesiva: 172 mm Retro etichetta: 75 x 90 mm Altezza adesiva: 30 mm La macchina è stata utilizzata senza problemi tecnici fino al 04.2026. Lo smantellamento fu ...
Disponibilità: immediatamente Dimensioni della macchina (LxAsxSuperficie): 6,0 x 1,5 x 2,5 m Peso: 1500 kg Documentazione tecnica: disponibile Capacità: 2600 casse/ora La lavatrice a cassa è stata utilizzata senza problemi tecnici fino al 04.2026. Lo smantellamento fu poi eseguito da personale qualificato. Formati: bottiglie VdF da 0,2 l / 0,5 l / 1,0 l -Sotec GmbH -Tipo WAH 26 -Costruito nel 1992 -Capacità: 2600 K/h La lavatrice di casse Kettner, tipo WAH 26, è stata prodotta nel 1992. Con una potenza fino a 2.600 casse all'ora, è adatta all'uso nelle linee di riempimento esistenti per la pulizia delle casse delle bevande.
Disponibilità: immediatamente Quantità: 2 Dimensioni della macchina: 0,5 x 0,5 x 1,5 m Peso: 50 kg/pezzo Testine di stampa: sciacquate e asciugate: Serial.No: KI940 Seriale. N.: KI941 - 2 x Stampante Linx per Dating per Bottiglie - 1 x Datazione sul coperchio - 1 x Datazione sull'etichetta retro La macchina è stata utilizzata senza problemi tecnici fino al 04.2026. Lo smantellamento fu poi eseguito da personale specializzato Prezzo unitario per stampante: 3.950,00 € VB
Disponibilità: immediatamente Documentazione: disponibile Dimensioni della macchina (LxLxH): 1,0 x 1,0 x 1,0 m Peso: circa 150 kg Il controllo completo della scatola è stato gestito senza problemi tecnici fino al 04.2026. Lo smantellamento fu poi eseguito da personale qualificato.
Disponibilità: immediatamente Dimensioni della macchina (LxLarghXA): 0,8 x 0,8 x 2,0 m Peso: 150 kg L'asciugatura delle bottiglie è stata effettuata senza problemi tecnici fino al 04.2026. Lo smantellamento fu poi eseguito da personale qualificato. Composto da: - 1 Soffiatore centrifugo ad alte prestazioni Paxton XT 500 4kW - 2 pale ad aria in acciaio inox resistenti 580mm LG. - 2 portalame ad aria in acciaio inox per Adattamento in 3 livelli - 1 telaio a base in acciaio inox con attacco Soffiatore - 1 distributore d'aria in acciaio inossidabile 2 x DN 76 mm - 1 involucro insonorizzato per soffiatore XT 500 - 4 coperture in acciaio inossidabile su tutti i lati come Protezione antischizzi Equipaggiamento aggiuntivo: - 1 ugello in acciaio inox Geset 40 x2 mm inclusi tubi e tubi Per lo soffiaggio del coperchio prima del getto d'inchiostro La macchina per l'a ...
Panoramica Questo decrate è stato prodotto nel 1993 dall'azienda tedesca Otto Fleischer. Il modello Rota/1/A è una macchina di disimballaggio a testa singola. È ancora installato e immediatamente disponibile. Dati tecnici Formati di bottiglia processati: 0,7L (GDB) e altri Funzionamento a testa unica 90 Progetto di ingresso-uscita Pressione operativa: circa 6 bar Alimentazione: 380 V / 50 Hz / N / PE Carico collegato: circa 4 kW Tensione di controllo: 24 V
Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: SMI Model: TF 300 Machine type: Tray forming machine (tray erector / tray packer) Year of manufacture: 2002 Capacity: approx. 23 packs per minute Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Automatic tray forming system Suitable for beverage multipack tray applications Integration capability into existing packaging lines
Overview This Twin Pack MDEL handle applicator, manufactured in 2002, is designed for the application of carry handles on beverage multipacks. The machine was primarily used for producing various multipack configurations, including 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, and 2x3x1.5L, offering flexibility across different bottle sizes and packaging formats. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: Twin Pack Model: MDEL Machine type: Handle applicator (carry handle machine) Year of manufacture: 2002 Application: Application of carry handles for beverage multipacks Formats: 2x3x0.5L, 2x2x1.0L, 2x3x1.0L, 2x3x1.5L Equipment Automatic carry handle application system Suitable for various multipack configurations Integration capability into existing bottling and ...
Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Model: Octopus 1800 BFTS Machine Type: Automatic ring pallet wrapper Year of Manufact ...
Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system
Panoramica Il seguente mixer a 6 componenti è stato costruito nel 1993 dal produttore tedesco Famix. Il mixer può essere offerto completamente revisionato e in garanzia. La macchina è disponibile immediatamente nelle sue condizioni attuali. Dettagli tecnici Capacità: max. 30.000 l/h Bevanda a 6 componenti Miscelatore Dimensioni (LxWxH): 3.200mm x 1750mm x 2800mm Misuratore di portata Pompa dosatrice Degassaggio sottovuoto Misurazione Brix misurazione CO2 Controllo della pressione CO2 Misurazione della conducibilità Dati elettrici Tensione operativa 400V/230 V 50 Hz Tensione di controllo 42V AC
Overview This FAMIX-Falterbaum 20000TD premix system, manufactured in 2000, is a fully automatic beverage mixing and carbonation system designed for continuous dosing, mixing, deaeration and carbonation of beverage components before filling. The system is suitable for the production of mixed and carbonated beverages using components such as water, syrup and CO₂. It is built as a compact stainless steel skid with integrated tanks, pumps, valves, piping, instrumentation and control cabinet. The premix unit has a capacity of approx. 22,000 l/h and includes two vertical stainless steel pressure vessels, which can be used for product deaeration, buffering and carbonation. The liquid flow is controlled via automated pneumatic valves and a manual stainless steel pipe connection panel, allowing flexible routing for production and CIP operation. The machine is operated via an integrated FAMIX c ...
Overview This 5 hl brewhouse was manufactured in 2016 by easybräu. The brewhouse consists of 2 vessels and is designed for beer brewing. It is currently still installed and can be visited at any time. The system is electrically heated; steam heating is possible. Valves are manually operated. The brewhouse is being sold because a larger system has been purchased. The brewhouse is immediately available and can be seen in person upon request. Technical data Capacity: 5 hl Configuration: 2‑vessel brewhouse, manually operated valves Heating: Electric (steam possible) Temperature control: Yes Recipe management: Recipe storage available Utilities: Electric power (steam optional)
Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling un ...
Overview This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end. The equipment is still installed and connected and can be viewed in person at any time. Technical details Capacity: max. 1,500 bph (1,000 bph were actually run) Bottled product: Beer Included formats: 0.33l longneck, 0.5l NRW Closure: Crown cap Scope of delivery Bottle washer | SEN | 1989 (overhauled and installed in 2020) Isobaric filler block | Shandong Yuesheng | 2019 Rinsing positions: 14 Filling positions: 12 Capping positions: 5 With pre-evacuation Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW D ...
Overview This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction
Overview This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data Capacity: 6,000 bph (1.0 l bottles) 7,000 bph (0.75 l bottles) Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) Bottle height: 150–370 mm Number of filling valves: 36 Filling principle: Low-pressure vacuum filling Running direction: Left to right Filling valve type: Electropneumatic Special features: Programmable bottle parameters with automatic adjustment for bottle height and fill level Hot filling capable with auto shutdown at temp ...
Panoramica Questo robot-palletizzatore è stato costruito nel 2014 dal produttore tedesco Kuka. La macchina ha 2 diverse teste di presa per la gestione dei KEG e delle casse di plastica. È dotato di 6 assi ed è in buone condizioni. La macchina è stata revisionata ogni anno e smontata nel 2025. Dettagli tecnici Capacità Dipendono dalla formazione degli strati Equipaggiati per la gestione di: casse Modul di KEG
Panoramica Questo wirehooder è stato prodotto nel 2010 da Robino & Galandrino. Il RECORD 14000 è progettato per l'applicazione di cappe metalliche su bottiglie. La macchina è stata in produzione fino alla fine di marzo 2026 ed è in condizioni di funzionamento. La macchina è stata ispezionata, pulita e lubrificata. Dati tecnici Capacità: fino a 14.000 bottiglie/ora Applicazione: Applicazione cappuccia a fili Configurazione: RECORD 14000 Utenze: 400 V / 3F / 50 Hz / ICC 20 A / IN 4,15 A
Übersicht Dieses Sudhaus wurde 2022 von der chinesischen Firma JingYing gebaut. Es wird verkauft, da die aktuelle Brauerei erweitert wird. Es handelt sich um ein dampfbeheiztes 3-Gefäß-Towersudhaus in sehr gutem, gepflegtem Zustand. Die Anlage wird mit Funktionsgewährleistung bei Lieferung angeboten und ist sofort verfügbar. Technische Daten Ausschlagwürze: 10 hl pro Sud Konfiguration: 3-Gefäß-Sudhaus (Maisch-/Würzepfanne, Läuterbottich, Whirlpool) Heizsystem: Dampfbeheizt Steuerung: Halbautomatische SPS (Steuerung von Pumpen, Heizung, Rührwerken, Temperaturprofilen, Rezepteinwahl) Gärung: 10 zylindrokonische Gärtanks à 20 hl (2 bar, Kühlmäntel, CIP-Kugel, Manometer, Probenahmeventile) Kühlung: Kälteaggregat 6 HP (~4,5 kW mechanisch, ~12–18 kW Kälteleistung), Wasser-Glykol-System, Bereich −4 bis +10 °C Dampferzeuger: Elektrisch beheizt, 72 kW (≈1 °C/min für 10 ...
Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details Capacity: 4.000 bph 4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.
Overview This all-copper brewhouse of type CBS-15 was manufactured by the German manufacturer Wachsmann in 1998 and first put into operation in 1999/2000. It is currently in storage in Bavaria and has recently been professionally overhauled - including new controls and motors. The system is available immediately. The brewhouse is being sold at a much more attractive price than previously invested. Originally, a recommissioning was planned as part of our own brewing project, but this could not be realized due to the lack of a building permit. Technical details Design: all-copper brewhouse incl. copper-clad smoke pipe and dummy extractor hood Hot wort: 17 hl Pouring: approx. 270 kg Commissioning: 1999/2000 Floor space: approx. 5.25 × 1.80 m (with control cabinet: 2.25 m) Recommended room height: min. 4.2 m Weight (empty): approx. 4,000 kg Control system: renewed after 2017
Overview This rotary vacuum capping machine was manufactured in 2023 by Alwid (Germany). The machine is equipped with three vacuum capping heads and is configured for TO82 twist-off closures on round jars. It is in excellent condition and comes with infeed and outfeed conveyors. The machine is available immediately. Technical data Capacity: approx. 1,000–1,400 jars/h Formats: Round jars Ø77/86 mm, 90 mm height; TO82 twist-off closures Working direction: Right to left Working height: Adjustable from 850 mm Electrical connection: 400 V, 50 Hz, 3-phase/N/PE Capping heads: 3 vacuum heads with torque adjustment via hysteresis clutch Conveyor: 1.5 m infeed + 1.5 m outfeed, stainless steel chain, width 82.5 mm Control: Siemens S7 HMI (German) Construction: V2A stainless steel base, drip tray, capping head unit, CE-compliant safety guarding with Makrolon panels and safety doors Scope of De ...
