Fabbricante:
(Categoria: 101)
spindle diameter: 110 mmx-travel: 2000 mmy-travel: 1700 mmControl: Fanuc spindle taper ISO: 50 z-travel: 1400 mmTable area: 1250x1500 mmTable load: 5000 kgspindle turning speed range: 35-3000 U/minTool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kWweight of the machine ca.: . tdimensions of the machine ca.: 1250 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
lunghezza tavola: 2000 mm larghezza tavola: 1800 mmcarico tabellabile: 12,5 tregolamento tabellare - longitudinale: 1.250 mm rotantetavola: 360 Grad posizionamento tabellare: 4 x 90 alimenti - longitudinale: 0,63 - 2.000 mm/minpotesse superiore: 4 kWpeso della macchina ca.: 7,6 t
spindle diameter: 90 mmx-travel: 2000 mmy-travel: 1250 mmz-travel: 1250 mmspindle turning speed range: 8-1600 U/minspindle stroke: 720 mmFeed: 1-2500 mm/Uweight of the machine ca.: 9,1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mmx-travel: 3000 mmy-travel: 1500 mmcontrol: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mmTable dimensions: 1200 x 1500 mmtable load: 5 tspindle turning speed range: 12 - 2300 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmControl: Heidemhain type: 426/430 spindle speed:: 18000 spindle taper: HSK 63 surface area: 1250x700 mmRotary table: 700 mmTable load: 1000 kgb-axis: Schwenkopf 0,001 °c-axis: 0-360° Rundtisch 0total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 700 mmz-travel: 630 mmControl: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mmTable load: 400 kgnumber of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mFEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1200 mmz-travel: 1200 mmfeed movement: 710 mmspindle taper ISO: 40 turning speed range: 8 - 1600 U/mintable-size: 1120 x 1000 mmtable rotating: 360 °table load: 2,5 ttotal power requirement: 11 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 3,3 x 3 mseparate switchboard, rapid feed, some tool holders, without face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 30 mmthroat: 320 mmbore stroke: 135 mmthread dia.: M 20 mmspindle turning speed range: 72 - 2600 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Uspindle taper: MT 3 table surface area: 370 x 360 mmDistance spindle/table max.: 850 mmdistance spindle/base plate: 1400 mmvoltage: 400 V / 50 Hztotal power requirement: 1,0 - 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,2 x 0,7 x 2,3 m• with cooling device• threading attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 90 mmx-travel: 900 mmy-travel: 900 mmz-axis: 1200 mmw-axis: 800 mmtable surface area: 900 x 1200 mmrotation movement: 360 Gradtable load: 6,0 tturning speeds: 25 - 1400 U/minspindle taper ISO: 40 voltage: 380 V / 50 Hzdrive milling spindle: 9,2 kWtotal power requirement: 35 KVAweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 2,8 x 2,5 m• Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,• radial face slide Ø 600 mm.traverse distance: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore diameter: 620 mmspindle diameter: 130 mmbore depth: 320 mmfeed stepless: 0 - 12 mm/minturning speeds: 10 - 70 U/minvoltage: 380 V / 50 Hztotal power requirement: 4 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,0 x 1,2 x 1,3 mtransportable drilling out work, completely ready for connectiongear of drill spindle runs over LENZE planetary driveadvanced feed with LENZE direct current motor, output: 160 wattclockwise and counterclockwisewith tool holder for Ø 420 x 620 mm,tool holder for tooling equipment fabri. LENZ LPAS 3,diverse turning steelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmtable surface area: 500x400 mmcontrol: Siemens type: 840 D spindle taper ISO: 40 spindle turning speed range: 8000 U/min: type of pallet-changer: 2 Rotary table: 360 °Cooling through the spindle: barTool changer: 40 chip conveyor: total power requirement: kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 32 bore stroke: 125 mmShort spindle: MK 3 throat: 210 mmMachine table - usable table surface: 390x390 mmtable load: 65 kgspindle turning speed range: 150-2.500 UpMPower requirement: 16 Atotal power requirement: 1,5 kWOverall size: 750x450x1745 mmweight of the machine ca.: 187 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 18 mm: M 12 : M 14 : MK 2 : 225-4.300 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel total power requirement: 0,37/0,55 kWMachine height: 840 mmweight: 110 kgStandard equipment:- Main switch with motor protection switch lockable- Reversing switch for clockwise and anti-clockwise rotation- Speed adjustment stepless- Protection IP 54- Mushroom pushbutton (latching) for EMERGENCY STOP- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 400 mmy-travel: 300 mmz-travel: 300 mmcontrol: Jasnac tool taper: BT30 Tools changer for 12 tools: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Centro di lavoro verticale HURCO VM10. Controllo Hurco WINMax Anno di costruzione: 2010 Produttore: Hurco Modello: VM10 Controllo: Hurco WINMAX Velocità mandrino: 10000rpm Dimensioni del tavolo: 762 x 356 mm Capacità di cambio utensile: 20 Dimensioni dell'utensile: DIN40 Traversi XYZ: 560 x 356 x 457mm
Anno di costruzione 2003 Controllo Heidenhain iTNC 530 Dimensioni tabella 280mm Carico tavolo 200kg Asse A +/- 110 gradi Asse B 360 gradi Cilindrata asse X 700mm Cilindrata asse Y 590mm Cilindrata asse Z 480mm Mandrino 15000 giri/min Passaggio rapido 32m / min Cambio utensile automatico Sì, sistema mandrino Big Plus Numero di strumenti32 Lunghezza utensile 280 mm Diametro utensile 88 mm o 125 mm con area tascabile adiacente Peso utensile 7 kg Ingresso400 / 3 / 50hz 33kW Trasportatori gap dell'apparecchiatura, refrigerante, volantino, refrigeratore d'olio Dotato di protezione completamente chiusa Lunghezza 4000 mm Larghezza 3000mm Altezza 3000 mm Peso netto in realtà 9.490 kg. / 9,4 tonnellate.
bore capacity in steel (diameter): 40 mmthroat: 293 mmbore stroke: 120 mmspindle taper MT: 3 column diameter: 115 mmtable surface area: 514 x 360 mmspindle turning speed - stepless: 160 - 2250 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 0,285 tdimensions of the machine ca.: mCondition: new / unused: The machine can be viewed under current.: 37981400 V, 50 Hz, colour: light grey RAL 7035continuous speed control, digital speed indication, push button for emergency switch off,turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso.operation manual, wiring diagram.Machine has been checked in our workshop, including electr. testing report.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacità alesaggio in acciaio (diametro): 23 / 28 mmquartista: 260 mm corsa alesaggio: 120 mmcono utensile: MK 3 dimensionitable: 500 x 350 mm diametro della colo: 100 mmpotenza totale: 1,3 kWpeso della macchina ca.: 400 kgdimensioni della macchina ca.: 800 x 600 x 1750 mmAlittamento selettivo! Rotazione destra-sinistrareseta della velocità
x-travel: 630 mmy-travel: 560 mmz-travel: 560 mmControl: Heidenhain TNC 430 total power requirement: 26 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 410 - 1000 mmworkpiece height max.: 765 mmcoolant: ja boring spindle diameter: 38 mmdiameter of quill: 70 mmspindle stroke: 225 mmboring spindle: MK 4 mm/minspindle turning speed - stepless: 70 - 2000 U/minfeed range - spindle: 0,04 - 0,32 mm/Ucolumn diameter: 225 mmbore radius max./min: max. 1130 mmtable surface area: 630 x 1320 mmheight adjustment: 500 mmbase plate: 1500 x 1000 mmT-slots: 4 StückT-slot - distance: 18 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mshift of supports: 590 mmwithout turntable and toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacità di perforazione in acciaio (diametro): 80 mm Taglio filettatura in acciaio: M 80 x 4 mm Proiezione: circa 500/2500 mm kl./gr. Distanza tra superficie di contatto e pinole trapano: 650/2300 mm Corsa pinole: 500 mm Superficie di bloccaggio del tavolo: 1250 x 2800 mm Velocità: 9 - 1800 giri/min Alimentazioni: circa 2 - 1250 mm Trasmissione mandrino: 7,5 kW Peso: 12000 kg Fabbisogno di spazio: 4000 x 1280 x 4100 mm
corsa x: 1000 mma-corsa: 508 mmz-corsa: 460 mmdimensione del pallet: 1240 x 550 mmnumero di pallet: 2 peso del pezzo: 800 kg cono del gomdrino ISO: 40 motore del gomdrino: 5,5 kWforza di velocità di tornitura: 28 - 4000 U/minno. Nº utensili in magazin: 30 controllo: MAZATROL M 1 potere di potenza complessiva: kWpeso della macchina ca.: 5,6 tdimensioni della macchina ca.: 4,50 x 3,00 x 2,65 macc.: trasportatore di trucioli
: 14 mm: M 10 : MK 2 : 230-4.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 16 mm: M 12 : MK 2 : 100-2.000 U/min.spindle stroke: 80 mmthroat: 190 mmcolumn diameter: 65 mm: 300x240 mm: 2 x 12 x 80 mm: 75/357 mm: 300x240 mm: 2 x 12 x 80 mm: 437/437 mmfeed: von Hand : Handkurbel Machine height: 825 mmtotal power requirement: 0,7 kWweight: 83 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 40 mm: M 24 : M 30 : MK 3 bore stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 514x360 mm: 2 x 14 x 224 mm: 117/701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160-2.250 UpMtotal power requirement: 1,45/1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 23 thread capacity: M10 bore stroke: 90 mmShort spindle: MK2 throat: 180 mmMachine table - usable table surface: 285x285 mmtable load: 45 kgspindle turning speed range: 150-1.250/350-3.000 UpMtotal power requirement: 0,75 kWOverall size: 735x470x1080 mmweight of the machine ca.: 106 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FEYEN Maschinen GmbH
