Fabbricante:
(Categoria: 101)
x-corsa: 11500 mmy-corsa: 4500 mmdiametro mandrino: 200 mmw-asse: 1600 mmz-asse: 2000 mmtavola rotante: 3000 x 4000 mmadattatore utensile: 80 tbed lunghezza: 4600 mmpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mincl. 15 targhe I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
lunghezza della tavola: 3500 mmlarghezza della tavola: 1750 mmcarico della tavola: 350 tpotenza totale richiesta: kWpeso della macchina ca.: 4 tdimensioni della macchina ca.: mI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
bore capacity in steel (diameter): 75 mmtotal power requirement: 14 kWweight of the machine ca.: 10 t- capacity at boring: 75 mm ( St 45 )- spindle diam. 115 mm- taper in spindle: 110 mm/ Morse 6- distance column to drilling spindel: 500.. . 2000 mm- vertical adjustment of arm: max. 1100 mm- distance column to drilling spindel: 450.. 2000 mm- drilling depth: 450 mm- range of speeds: 12,5 ...1600 U/ min // rpm- feed: 0,63 ... 3,15 mm / U- angle of arm: 360 °The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lunghezza del braccio: 300... 1600 mmRaggio del foro max./min: 1800 mmCapacità del foro in acciaio (diametro): 56 mmFilettatura: Max. 65 mm Profondità del foro: 400 mmCono utensile: MK 5 piastra di base: 1700 x 1000 mm Gamma di velocità di tornitura - foratura: 14...1800 U/min avanzamento: 0,0315...1,6 m/min potenza totale richiesta: 4,5 kW peso della macchina ca.: 7,13 tdimensioni della macchina ca.: m- distanza Testa mandrino alla base: max. 1600 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Dimensioni (L/L/A): 2000 x 2000 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
dimensioni della tabella: 280 x 360 mmcorsa della cannella: 120 mmpotenza totale richiesta: 0,8 kWpeso della macchina ca.: 350 kgdimensioni della macchina ca.: m- Produttore: Chemnitzer Maschinenbau GmbH Chemnitz- velocità (continua): 460 - 1840 U/min , 140 - 560 U/min- Dimensioni della tabella: 280 x 360 mm- Tabella di traslazione di regolazione: 540 mm- Supporto: MK 2I dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
capacità di alesaggio in acciaio (diametro): 50 mmgola: 355 mmcorsa di alesatura: 280 mm cono mandrino: MK 5 regolazione della testa del mandrino: verticale 280 mm motorschfeed: 0,11-1,73/9step mm/minvelocità di tornitura: 32-1400/12step U/mintable-size: 770 x 640 mmsuperficie superficiale: 630 x 500 mmpiastra di base: 490 x 530 mmpotenza totale richiesta: 8,1 kW peso della macchina ca.: 1,7 tdimensioni della macchina ca.: 1,25 x 0,8 x 2,75 mI dati di questo annuncio sono stati creati con ModulMWS, la soluzione software di LogoTech oHG.
corsa: 600 mmLunghezza: 450 mmLarghezza: 400 mmGamma di velocità di tornitura del mandrino: 20 4500 U/minControllo: Heidenhain TNC 425 peso: 3300 kgdimensioni della macchina ca.: 4,0 x 3,8 x 2,1 mpotenza totale richiesta: 15 kWcono utensile: HSK A 63 dimensioni della tavola: 850 x 440 mmcentro di lavoro a 3 assiI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
Dimensioni della tabella: 1800 x 2000 mmI dati di questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
capacità di alesaggio in acciaio (diametro): 60 mm / MK5lunghezza del braccio: 1600 mmcorsa del cannotto: 310 mm velocità del mandrino:: 28...2500 U / mintable-size: 1470 x 986 mmpotenza totale richiesta: 4 kWpeso della macchina ca.: 4,6 tdimensioni della macchina ca.: mI dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 800 mm W-axis travel: 1250 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 °WORKING RANGE -BORING- drilling depth (max): 800 mm drilling capacity full bore (steel): 25 mmSPINDLE / HEAD tool fixture: HSK A50 drive power: 15 kWAXIS DRIVES feed velocity (max): 15000 mm/minTOOL MAGAZINE number of positions: 20 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5600 mm space requirements -front/back-: 4910 mm total heig ...
Comando HEIDENHAIN TNC 430 Velocità del mandrino 20 - 9.000 1/min Max. distanza percorsa X= 500, Y= 400, Z= 400 mm Portautensili SK 40 Cambio utensile a 16 stazioni Tavola rotante con assi B e C Superficie di serraggio Ø 700 x 500 mm carico massimo tavola 200 kg Misurazione del pezzo con sonda a infrarossi
spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs € 118,436.00)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...
Indicazioni: - Capacità di foratura nel legno 40 mm - Capacità di foratura in acciaio 18 mm - Supporto mandrino di foratura MK 2 - Corsa cannotto 120 mm - Velocità del mandrino di foratura regolabile in continuo a gradini - 60 - 2840 giri/min - Tabella di distanza massima – mandrino di foratura 600 mm - Braccio/unità inclinabile a sinistra + a destra 45 ciascuno - Braccio / unità girevole a sinistra + destra - Dimensioni del tavolo 450 x 450 mm - Azionamento 400 V / 0,33 / 0,55 kW - Ingombro ca. L 500 x A 1870 x P 1200 mm - Peso ca. 150 kg
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Centro di lavoro CNC Hedelius BC 100 P-3500 Magnum Controllo: Siemens Sinumerik 840D Viaggio: Asse X 3.500 mm Asse Y 1.000 mm Asse Z 770 mm Area di serraggio 4.150 x 1.000 mm Scanalature a T 5 pezzi Distanza scanalature a T 200 mm Altezza tavolo dal pavimento: 730 mm Carico tavola: circa 4.000 kg Montatura: DIN 69871 SK 50 Magazzino utensili: 50 – scomparto Velocità di rotazione: 20 - 4.500 rpm Accessoristica - Automazioni per porte - Operatore portatile - Cofano macchina -Trasportatore
x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmtotal power requirement: 40 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 700 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diametro del mandrino: 0 mmcorsa x: 700 mmcorsa y: 600 mmlunghezza della tavola: 800 mmpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mDesign a doppia colonna Jig Borerdimensioni della tabella: 800 x 600 mm
thread dia.: M6 - M22 mm: 60/200 U/min.: 105 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 3 - 5 mmthroat: 150 mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVarious Special purpose drilling machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mP O S A L U X (Switzerland)Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope a ...
core drilling diameter max.: 18 mmbore depth: 320 mmswing diameter: mmtotal power requirement: 33 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece diameter: 8-125 mmgrinding depth: 130 mmclamping length: 50-1100 mmmax. workpiece diameter: 0 mmmin. workpiece diameter: 0 mmworkpiece length: mmtotal power requirement: 1 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400_______________________________________________________Distance between centres 50 – 1,100 mmHeight of centres 145 mmWorkpiece Ø 8 – 125 mmMax. centre hole taper Ø 2 – 50 mmMax. centre hole taper angle 60 °Clamping range of vice 4 – 150 mmS ...
core drilling diameter max.: 50 mmbore depth: 2000 mmswing diameter: mmdrilling capacity diameter max.: 110 mmtotal power requirement: 30 kWweight of the machine ca.: 10 tDrilling Ø, approx. 2 - 50 mmBoring Ø, approx. 100 mmDrilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mmStroke of drilling slide, approx. 4,000 mmDistance between the two spindle heads 5,000 mmHeight of centres above guideways 350 / 450 mmDrilling feed of drilling slide, infinitely variable 20 - 200 mm/minQuick feed of drilling slide 2,500 mm/minSpindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kWDrive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kWTotal electrical load, approx. 60 kW - 380 V - 50 HzTotal length of machine / guideways 7,500 / 5,000 mmWeight, approx. 10,000 kgAccessories / Special Features Machine consists of the following elements: Main spind ...
cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: m: : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope and machine lamp.The data for this ad was created with ModulMWS - ...
: 0 : 0 potenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mForo su scheda PC m/c, mandrino singolo, proiettore.
spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mmLower table 3,300 x 2.400 mmMax. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mmFeeds 0.9 - 2,000 mm/minQuick feed for headstock and column 5,000 mm/minQuill feed 0.5 - 1,200 mm/minSpeed range, partially infinitely variable 4.5 - 1,250 rpmWeight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. ...
diametro del mandrino: 105 mmx-corsa: 1250 mmy-corsa: 1000 mmz-corsa: 600 mmlunghezza tavola: 1100 mmlarghezza tavola: 900 mmadattatore utensile: 50 ISO / MKpotenza totale richiesta: kWpeso della macchina ca.: tFresa da tavolo CNC, ricondizionata 2002, BOSCH CC 300
ZOMA Maschinenhandel
