3,502 fresalesatrici e centri di lavoro usati in vendita

:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mmarm length:3150 | 4000 mmdistance spindle center to floor plate:2500 | 2500 mmdistance spindle center to table:min. 750 mmspindle stroke:500 | 560 mmDistance between spindle and column, max.:3150 | 4000 mmDistance between spindle and column, min.:570 | 600 mmspindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/mintransmission ratio:22 feed range:0.06-3.2 mm/mindice table:800x1250 mmpower capacity:15 | 18,5 kWWeight approx.:20000 | 28500 kgMachine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mmpayment: 100 % before loadingwarranty:12 months

x-travel:610 mmy-travel:580 mmz-travel:580 mmdistance spindle nose and table:70-650 mmdistance spindle center to table:80-660 mmtable height over floor:1150 mmpallet table size:400x400 mmmax. workpiece weight:400x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:9500 kgCNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barServo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/F ...

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"

x-travel:710 mmy-travel:680 mmz-travel:680 mmdistance spindle nose and table:70-750 mmdistance spindle center to table:80-760 mmtable height over floor:1150 mmpallet table size:500x500 mmmax. workpiece weight:500x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:12200 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/ ...

x-travel:700 mmy-travel:550 mmz-travel:500 mmtool taper:SK40 spindle speed max.:12.000 U/minTool changer:30 fach electronic handwheel chip conveyor

x-travel:1050 mmy-travel:850 mmz-travel:970 mmdistance spindle nose and table:100-950 mmdistance spindle center to table:100-1070 mmtable height over floor:1300 mmpallet table size:630x630 mmmax. workpiece weight:1200x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:21600 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip conveyor  ...

x-travel:800 mmy-travel:840 mmz-travel:865 mmtotal power requirement:24 kWweight of the machine ca.:15,5 tdimensions of the machine ca.:4 x 3 m5 axes, 1 spindle A axis -30TO + 210 DEGB axis 360 x 0.001 Axis speed: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle: 29 KW max. spindle speed = 1200 rpmmax. torque = 34.6 Nm Tools:HSK-A63 87 places in the magazine

x-travel:1200 mmy-travel:1000 mmz-travel:1000 mmdistance spindle nose and table:100-1100 mmdistance spindle center to table:200-1200 mmtable height over floor:1350 mmpallet table size:800x800 mmmax. workpiece weight:1800x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:26000 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barServo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip convey ...

x-travel:800 mmy-travel:840 mmz-travel:865 mmcontrol:Siemens 840 D spindle speeds::10.000 rpmspindle drive motor:20 kWweight of the machine ca.:16 tdimensions of the machine ca.:4 x 3 m4 axes, 1 spindle A axis 360 x 0.001 Axis speeds: X= 65 mm/min; Y= 55mm/min; Z= 60mm/min Spindle torque = 262 Nm Spindle 20KW / 10,000 rpm Tool HSK-A100 57 places in the magazine

x-travel:560 mmy-travel:410 mmz-travel:460 mmtable-size:900 x 410 mmspindle cone ISO:40 turning speed range - stepless:7000 U/minfeeds:20-10000 mm/minrapid motion -longitudinal/cross/vertical:26 / 26 / 30 m/mintool piece magazine with:24 CNC-control:MAZATROL M plus total power requirement:38 kWweight of the machine ca.:5000 kgdimensions of the machine ca.:3,5 x 2,9 x 2,3 m hoch mnice machine from 2. handunder power in our stockincl. manualsincl. chip-troughcover on the top upcraded ( stainless steel )incl. cero point clamping device CHICK

x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

Tensione di esercizio: 400 V Frequenza: 50 Hz Tensione di controllo: 24 V Corrente nominale: 25 A Connessione: 13 kVA Controllo: HEIDENHAIN Portaattrezzi: SK 40 Inclusa una commutatrice di utensili a 15 pieghe Inclusi i portautensili SK 40 situati nel cambiatore Dimensioni del tavolo: 750 x 450 mm Con 3 solchi Attenzione: senza i vizi della macchina mostrati nelle foto Viaggio: X: circa 500 mm Y: circa 400 mm Z: circa 400 mm Auction-ID: A7-40870-30

x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D sl tool change unit:15 fachtaper ISO:BBT 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:22 kVAweight of the machine ca.:4,1 t5 axis simultaneously milling-drilling machining center,NC-rotary-swivelling table,direct measuring system,airblast outside,el. handwheel,no internal Coolant Supply,no chipconveyor,Approx. 37.000 hours "machine on", approx. 11.600 hours "spindle on"

Su e incluso 1 banco da lavoro in acciaio con piano in compensato da 4 cm Auction-ID: A1-38447-215

:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mmx-travel:900|1250|1600 mmy-travel:900|900|1200 mmz-travel:1400|1400|1400 mmW-axis (spindle longitudinal):600 mmB-axis (table):360x1 °table load:5 ttable-size:1100 x 960|1250 x 1100|1250 x 1100 mmT-slots:22 mmspindle speed:22 Stufen, 8-1000 1/minspindle taper:50 ISOrapid speed:(X / Y / Z / W) 2500 mm/minspeed - faceplate:4-200 1/mintorqe of face plate:1960 Nmdia of faceplate:630 mmmovement of facing slide:180 mmweight of the machine ca.:11,5|18|20 tmain drive:7,5 kWMachine size (LxWxH):5120x3380x3100 mm2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mmx-travel:1600|2000|2000 mmy-travel:1400|1800|1800 mmz-travel:2000 mmU-axis:250 mmW-axis (spindle longitudinal):900 mmmax. torque on the spindle:3200 NmB-axis (table):360x1 °rapid speed:X/Y/Z/W: 2500 mm/mintable load:8|10|10 ttable-size:1600 x 1400|1800 x 1600|2200 x 2000 mmT-slots:9/11/12 Stk.T-slot - width:28 mmtransmission ratio:4 Stk.spindle speed:4-800 1/minspindle taper:50 ISOfaceplate:Drehmoment: 4900 Nmfaceplate:2.5-125 1/minfaceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mmweight of the machine ca.:22,5|24,5|25,5 tmain drive:22 kWMachine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mmPLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure ra ...

x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,

x-travel:410 mmy-travel:610 mmz-travel:500 mmturning speeds:15000 1/mintool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mmtable load:100 kgtool change unit:48 Pos.total power requirement:35 kVAweight of the machine ca.:7,4 tdimensions of the machine ca.:4,15 x 3,8 x 3,28 m5-axis simultaneously machining center,NC-round-swivelling table, C-axis 360°, B-axis +30/-120°,chipconveyor,3D touchprobe,internal coolant supply 20bar,el. handwheel,kinematicsopt,meter readings:approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:2300 mmy-travel:1200 mmz-travel:600 mmturning speeds:30-10.000 1/minmax. torque on the spindle:254 / 159 Nmcontrol:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos.spindle:40 / 25 kWfixed working table:surface area:1.100 x 1.100 mmrotary table:1.100 x 1.100 mmrapid traverse:30 m/mintotal power requirement:69 kVAweight of the machine ca.:20 tuniversal machining center with indexing head (2,5°),NC-rotary table, max. table load 1.500kg,internal coolant supply 30 bar, paper filter,el. handwheel,chipconveyor,automatic doors,flush gun,no touch probe available,approx. 81.400 h main swich onapprox. 72.200 h control onapprox. 26.700 h program running on machine under power , for functional testing

x-travel:750 mmy-travel:600 mmz-travel:520 mmtable surface area:D 700 x 500 mmturning speeds:42.000 1/mintool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos.rapid traverse:50 m/mintable load capacity - central/maximum:350 kgtotal power requirement:50 kVAweight of the machine ca.:9 tdimensions of the machine ca.:3,2 x 2,65 x 2,8 m5-axis simultaneously HSC-machining center,NC-round-swivelling table B-axis 180°, C-axis 360°,chip conveyor,el. handwheel,laser,prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe),mode 4,oilmist suction,spindle chiller,no internal coolant supply,approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in totalmachine in good condition (test report available)

Controllo: Siemens Acramatic A2100 Di Velocità: 6.000 giri/min Corsa in X/Y/Z: 510/510/510 mm Fuso: Tecnologia: Fuso a nastro Velocità: 6.000 giri/min Portautensili: SK40 Pancone: Area di serraggio: 700 x 520 mm Carico del tavolo (max.): 500 kg Generale: Rivista Tool: 21 stazioni Traversata rapida in X/Y/Z: 24/24/24 m/min Equipaggiamento/accessori: Gestione dei chip: vassoio per patatine Gestione del liquido di raffreddamento: pompa IKZ con filtro e alta pressione Misurazione utensile: pulsante, Renishaw TS27R Funzionamento di impostazione: volante elettronico Altre attrezzature: Div. gebr. Portautensili e 1 morsa per macchina (Allmatic HD 125), trasformatore ATTENZIONE: La macchina non è larga ed è venduta come portapezzi di ricambio. Secondo il distributore, il controllo (la scheda) è difettoso. Auction-ID: A7-40921-5

Auction-ID: A1-38447-495

x-travel:1000 mmy-travel:610 mmz-travel:600 mmtable-size:1150 x 600 mmtable load capacity:1000 kgrapid traverse X- and Y-axis:24 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:10.000 1/minspindle drive:15/22,5 kWtool change unit:30 Pos.CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mmweight of the machine ca.:7 tdimensions of the machine ca.:3,2 x 2,2 x 2,7 mvertical machining center,- internal coolant supply 30 bar- chipconveyor- cartridge filter- flat tracks- el. handwheel- prepared for 4th axis- 3D touchprobe RENISHAW OMP 60- indirect measuring system- accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray)approx. 6.000h "spindle on"

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 18.500h "machine on", approx. 500h "spindle on"

x-travel:250 mmy-travel:200 mmz-travel:300 mmweight of the machine ca.:1500 tdimensions of the machine ca.:2,7 x 1,95 x 2,2 mB-axis (table):180 mmrotary table diameter:180 mmindexing device - swivable:360 °

travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:12000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:40 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWweight:6,8 to.space requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply 20bar,airblast through spindle,direct measuring system,prepared for 3D-touchprobe (M&H PS 25.00),chioconveyorNC-dividing device LEHMANN EA 520 L MA (center height 180mm)approx. 26.000h "machine on", approx. 7.500h "spindle on"

x-travel:3000 mmy-travel:600 mmz-travel:800 mmtable surface area:3.600 x 650 mmmax. table load:2.800 kgcontrol:TNC 426 HEIDENHAIN turning speeds:6.000 1/mintool change unit:30 Pos.taper ISO:SK 50 rapid motion - x-axis:30 m/minrapid motion - y-axis:30 m/minrapid traverse Z-axis:30 m/minspindle drive:31 / 21,5 kWtotal power requirement:45 kWdimensions of the machine ca.:5,5 x 3,4 x 3 mweight of the machine ca.:15,5 t3-axis vertical machining-center,prepared for 4th axis (wire and plug), internal cooling device 40 bar,chip conveyor,el. handwheel HR 410,3D-touch probe,direct measuring system,dividing wall, twin table machining,flush gun,table elevation 100mm,bed flushing,coolant of spindle (oil),approx. 53.000 switch on hours, 18.500 spindle hours

:FB-160 spindle diameter:160 mmx-travel:4000/6000/8000/10000/12000/14000/16000 mmy-travel:2000/2500/3000/3500/4000 mmz-axis:1200 mmw-axis:700 mmspindle cone:50 SK/BTspindle speed max.:3000 U/minspindle drive:37/51 kWfeeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/minrapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/minmax. torque on the spindle:3.300 Nmcross section of ram:460x520 mmtable load:30 ttable-size:2500x2500 mmtable travel:1500 mmweight of the machine ca.:FBM-160 mit X=4m: 80 tpositioning accuracy:0.032/1000 mmrepeating accuracy:0.018/1000 mmCNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more.Newly developed FB seriesConvenient for a variety of ma ...

table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.