WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm  ...

Four-sided planer Little Unimat 23 E Year of construction 1999 Serial Number 88103 Throughput 5/24 m/min Workpiece width min/max 20/230mm Workpiece height min/max 8/160mm Spindle diameter 40mm Length of feed table 1950mm Groove bed 1st spindle bottom: 5.5kW 2nd & 3rd spindle right & left: 11kW 4th spindle top: 15kW 5. Spindle top: 11kW 6. Spindle bottom: 5.5kW Total power 54kW Total 117Amp. Fuse 125Amp. Transport dimensions: 4200x2000x2100 (LxWxH) weight +/- 4500kg

WEINIG Unimat 500 – 5 spindles • Planing width max. 230 mm • Planing height max. 120 mm • Feed electronically frequency-controlled 5-30 m/min. • Feed motor 4 KW • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 11 KW • 3rd spindle on the left with electr. Axle adjustment FORWARD – BACK • 4th spindle top 7.5 KW with electr. Axis adjustment HIGH-LOW • 5th spindle bottom 5.5 KW • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatic, high-low controlled • Lateral pressure roller in front of the left spindle, running and spring-loaded ...

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pullin ...

– German production – corrugated top – year of production 1996 – rollers in the countertop pulling TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm corrugated top spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 bottom spindle 7.5 kW smoothly adjustable feed 6-36 m/min feed motor power 5.5 kW six upper steel pulling rollers two top rubber pulling rollers three rollers in the countertop pulling pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of the pre-worktop 1970 mm electric height adjustment central lubrication (spli ...

– German production – year of manufacture 2002 –DTR TECHNICAL PARAMETERS: planing width 230 mm planing height 170 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW spindle diameter 40 mm electric height adjustment five steel top rollers four rubber top rollers pneumatic pressure table top length 1980 mm central lubrication feed adjustable on the inverter 6-26 m/min feed on cardan shafts feed motor power 4 kW connection diameter 140 mm machine dimensions (L/W/H) 520 / 210 / 210 cm weight 4000 kg

– German production –DTR – for wet wood – hydrohebel TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm rollers in the countertop pulling spindle diameter 1-4 - 40 mm spindle diameter 5-6 - 50 mm 1 bottom spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW 6 upper spindle 7.5 kW feed motor power 4 kW feed adjustable smoothly on the inverter 5-26 m/min jointers on the last two heads five upper steel pulling rollers four top rollers rubber pulling four rollers in the countertop pulling pneumatic pressure feed on cardan shafts electric brakes electric height ad ...

Planer WEINIG UNIMAT SUPER 4 – German production – very good condition – year of manufacture 2004 –DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools adjustable top head 1) bottom head 11 kW 6000 U/min 2) top head 18,5 kW 7000 U/min 3) bottom head 5,5 kW 6000 U/min feed motor 2,2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic pressure three upper fixed pulling rollers one rubber top roller corrugated top length of the pre-worktop 1950 mm total power 37 kW central lubrication Trzansport dimensions: length/width/height 320x220x220 cm we ...

Four-way planer Weinig Unimat U 23 (Ref. No. 231-2615) with 7 waves Planer width 130 mm Planing height 140 mm Masch. Item no. 023-161 Year of construction 1991 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

SECOND-HAND 3 SPINDLES MOULDER WEINIG MOD. UNIMAT SUPER 4 - Working width 25-150 MM. - Working thickness 15-50 MM. - Feeding speedy 5/20 M/MIN. - 1st spindle 11 Kw - 2nd spindle 18.5 Kw - 3rd spindle 5.5 Kw  ...

• more information