We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). S ...
Thermally insulated hall, whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins partly made of hot-rolled steel profiles and partly of cold-formed steel profiles. WALL CLADDING: Sandwich panels, grey-white on wall substructure made of cold-formed and galvanised lightweight profiles. LOCATION: South Eifel, Rhi ...
Insulated steel hall 30x60x6/8.6m with crane runway on 15x60m and a row of central supports in the fifteen-metre axis, which is to be dismantled in the short term. It is a thermally insulated hall whose supporting structure and part of the cladding as well as various accessories can be reused. SUPPORTING STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to accommodate the building envelope consists partly of hot-rolled steel profiles and partly of cold-formed steel profiles made of galvanized strip steel. At the time of planning, a snow load of 0.75 kN/m² was assumed. The structural engineer must check whether there are suffi ...
It is a steel skeleton construction made of hot-rolled steel profiles. Since even the roof purlins are made of hot-rolled profiles, there are sufficient static reserves for a solar system. The dimensions as per drawing: Hall width: approx. 21.40 m AK wall (12.5+5+3.5m); Hall length: approx. 25.40 m AK wall; Frame spacing: approx. 5.00 m; Eaves height: approx. 7.07 m OK steel frame of the crane hall; ca. 3.32 m OK of the hall towing; Ridge height: approx. 8.32 m OK steel of the crane hall at the ridge node; ROOF & WALL: The building envelope is disposed of as it cannot be reused. DOCUMENTATION: The original construction documents from 1981 are available. N ...
Steel construction with trapezoidal sheet metal Dimensions: 9.84 x 19.96 m Location: near Cologne ...
Lightweight hall with sectional doors and light strips with gable roof truss and fish-bellied truss BS11 b = 14 cm partly open, partly with trapezoidal sheet metal walls Area: approx. 445 m² Dimensions: 15.95 x 27.92 m Heights: 7.66 m; 8.15 m; 8.91 m ...
Floor plan dimensions main tower: approx. 11 m x 11 m Height of the main tower: 37.65 m Height of side tower: 21.05 m ...
Automatic sheet to sheet Laminator DGM ETH1650 Manufacturer : DGM Year of Installation : 2014 Year of Manufacturing : 2014 Format : 1650x1450 Description : High Speed Automatic Sheet to Sheet Carton Laminating Machine - Maximum paper size : 1650 x 1450 mm - Minimum paper size : 380 x 380 mm - Top Sheet : 180-350 gm/m2 - Corrugated Board: E,F,B,C,A & up to 5 layers - Carton Board: min 250 gm/m2 - Speed : 5000 s/h - Line speed: 130m/min - Dimensions: 14.5 x 2.6 x 2.7 m - Weight: 8.5 ton - Power Consumption: 15.7 kW
Adjusting nut for die-casting machine OL2000, trapezoidal thread 285 x 10, Oleopress, new -50% Special price -50% of the original price! In addition, we also have a replacement column and 1 piece of spar nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 259 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in its original packaging.
Product number: 1982 Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg