We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Center height: 205 mm Center distance: 1000 mm Spindle bore: 52 mm PUMA - C410 Universal lathe Ø 410 x 1000 mm MACH - ID 6353 Make: PUMA Type: C410 YOP: 2012 Swing over bed Ø 410 mm Swing over cross slide Ø 255 mm DBC Turning Length 1.000 mm Spindle bore 52 mm Spindle power 5.5 kW Bed width 250 mm Tailstock spindle Ø 50 Ø Stroke pinole 120 mm Spindle taper 4 Mk Speeds / ranges Vario 3000 Rpm Digital read out Var ...
Turning diameter: 0 mm Turning length: 770 mm Turret positions: 10 CNC Brand: Fanuc CNC Model: 10 t Make Puma 10 S Type 10 S Year New 1989 Puma 10 S with FANUC 10 T Centre height (mm)Max. swing 700 Center distance (mm)Over car = 350 Spindle bore DBC = 770 Bore = 77 CNC FANUC 10 T ATC 10 Positions Some tooling
Puma 700LM CNC Lathe Length : 3000 mm Diameter : 700 mm C axis 21 inch chuck Fanuc control unit 12 station turret Machine is in good working condition ...
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMW ...
Universal Punching machine GEKA PUMA 50/E-750 Punching capacity: 50 T Table size: 1000 x 500 mm with length stop Drilling Capacity: Ø 27 x 13 mm Max punching in round: Ø 70 x thick 5 mm / Ø 100 x thick 3,5 mm Max punching in square: 50 x thick 5,5 mm / 60 x 4,5 mm / 70 x 4 mm Max punching in rectangle: 90 x 25 x thick 5 mm Year of construction: 1991 Throat depth: 750 mm Delivered with a set of punches Voltage: 380 V Dimensions (L x W x H): 2000 x 1300 x 2000 mm Weight: approx 2,2 T
Description: Serial number: PTL2000036 Frequency: 50/60 Hz Power: 42.4 kVA Rated current: 111.63 A Control system: FANUC SERIES 18i-TB The machine is equipped with a 2-fold tool turret, one with 8 stations, the other with 12 stations Travel paths: Z: approx. 500 mm X: approx. 400 mm Incl. chip tray with 3 cooling water pumps weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,700 x 2,000 mm
For sale: Daewoo Puma CNC turning center type TT2500SY with a Fanuc 18iTB controller. This is a CNC lathe with 2 spindles with a full C-axis, 2 turrets (BMT-65) with 12 positions (with intermediate positions) and a Y-axis on the top turret. All (driven) tool holders, including 2 driven holders in the angle, as well as a complete set of collets etc. are included with the machine. The machine also includes a 250 mm chuck for the main spindle.
From a current recycling we offer you Puma yard loader HL ECO 34 c. Year of construction 2022 Hours: 64.1 Condition:- Original price: - Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89281 Altenstadt The sale is without warranty Subject to prior sale
5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor R ...
5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 â 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, M ...