We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Description: control: OSP3000 travels X-axis: 300 mm Z-axis: 750 mm swing diameter: 400 mm spindle speed range: 65 - 3500 rpm power consumption: 41 kW accessories: 3-jaw chuck special chuck tool holders  , please also have a look at the videos of this machine x-motion: 300 mm, z-motion: 750 mm, control: OSP3000, turning speed range: 65 - 3500 rpm, total power requirement: 41 kW, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,000 x 1,800 mm
The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg
Stock Number: 3788 CNC LATHE manufacturer: OKUMA , Type: LVT 400 M - Vertical Machine NO.: 134682, Year of manufacture: 2007 Specifications: Max. swing diameter 480 mm dia. Turning length 300 mm Main engine power 22/15 kw Main spindle speed range 35-3300 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Powered stations turret 1 12 pieces. Driven werkzeuumdr. 30-3000 rpm Control OSP Fabr. Controlled in 3 axes Operating hours spindle 14910 hours Accessories: Load and Unload device Hydr. Chuck Main Spindle OSP P-200 3D-M Kit mm dia Tool setter Chip conveying. Cooling water syst ...
Description: Control: OSP U 100 L Max. turning length: 340 mm Chuck diameter: 10 inches X-axis: 280mm Y axis: 120mm Z axis: 500mm C-axis: 360°(0.0001°) Spindle: 4500rpm Spindle passage: 62 mm Accesories: -Driven tools -chip conveyor -Transformer -Manuals Drehlänge: 340 mm, serial number: 100,277, x-motion: 280 mm, y-motion: 120 mm, z-motion: 500 mm, control: OSP U 100 L, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,500 x 2,000 mm
This Okuma LB 300 Lathe was manufactured in the year 2012. It is equipped with an Okuma OSP U100L control unit. The machine has a spindle speed of 45-3800 rpm. ...
This used 4-Axis OKUMA LB 300 MY was manufactured in 2000, featuring a CNC OSP U 100 L control, maximum turning diameter of 340mm, and main spindle big bore option. It has a rapid feed rate of 20-25 m/min for X and Z axes, and a 12 station turret with a Y-axis travel of 120 mm. The OKUMA LB 300 MY machine we have for sale has clocked approximately 3,500 cutting hours, signifying its reliability and performance. For more details, contact us.
OKUMA MX 45 VAE TECHNICAL SPECIFICATIONS CNC model Okuma OSP Cnc version OSP 700 M Tool mount BT 40 Spindle power 11Kw Kw Number of Spindle Revolutions 7000 Tool number 30 X-axis travel 762 mm Y-axis travel 460 mm Z-axis travel 450 mm Rapid advances linear axes X Y Z 30 30 24 m/min Table dimensions 1000x460 mm Roller guides High cooling pressure Pressure value 15 bar System with external tank with filter yes Dredging chip evacuator
control: OSP 5000L-G greates pass round over bed: 450 mm turning diameter: 400 mm turning length: 730 mm Tool turret 12 positions: transmission ratio: 4 chuck: 300 mm total power requirement: 35 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 3890 x 2880 mm BIG MASCHINE 450 X 730 MM 2 TURRET CNC CONTROL OSP 5000 L WITH OUT TAILSTOCK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done ...