turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control, numeric control, made of MAX MÜLLER GILDEMEISTER MD 5S Type Eltropilot M Year of construction approx. 1980 Rack with 20 module slots - 12 built-in modules Built-in modules : 1 piece 0.651.406-19.3 UNI 030655-1017 Universal Interface 1 piece 0.650.847-56.1 O32 output card 2 pieces 0.651.708-57.3 I32 032937-1017 Input card 1 piece 0.652.138-36.1 APC 1 piece 0.651.928-25.3 LAB Position control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY 030645-1017 Serial interface 1 piece 0.651.974-23.2 ABS termination card 1 piece 0.651.298-18.3 CPU 030649-101 7 CPU dimensions W x H x D 480x 260 x 220 mm Weight 7 kg Individual cards on ...

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or stra ...

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

cross-section width:: 40 (45) mm cross-section heigth:: 25 mm feed:: 1 - 999.999,9 mm speed of feed:: 1 - 60 m/min cuts max.:: 100 Schnitte/m Condition: used, Specification: circular knife cutting machine - second-hand for cutting rings, discs and profiles - diameter max.: 45 mm - 3 hoses or strands: 6 - 20 mm - 2 hoses or strands: 20 - 30 mm - 1 hose or string: 30 - 45 mm - cross section width max.: 40 mm - cross-section height max.: 25 mm - feed speed: 1 - 60 m/min, infinitely variable - Cutting capacity max.: 100 cuts/min depending on material and cutting length - Cutting length: 1 - 999.999,9 mm - Step jump: 0.1 mm - Feed by ...

turning diameter: 850 mm turning length: 1500 mm control: Siemens 840c centre distance: 1500 mm centre height: 450 mm turning dia. over face-slide: 690 mm spindle diameter: 200 mm spindle passage: 128 mm power capacity: 65 kW turning speeds: 7,1-18000 U/min Torque: 5783 Nm rapid traverse: 10 m/min x-travel: 510 mm z-travel: 1480 mm Tool changer: workpiece weight: 800 kg total power requirement: kW weight of the machine ca.: 17,5 t dimensions of the machine ca.: 6x2,4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mm turning length: 1500 mm control: Siemens 840D centre distance: 1500 mm centre height: 450 mm turning dia. over face-slide: 690 mm spindle diameter: 200 mm spindle passage: 128 mm power capacity: 65 kW turning speeds: 7-1950 U/min Torque: 7908 Nm rapid traverse: 10 m/min x-travel: 510 mm z-travel: 1480 mm Tool changer: ja workpiece weight: 800 kg total power requirement: 110 kW weight of the machine ca.: 17,5 t dimensions of the machine ca.: 11 x 4,2 x 3,3 m CNC turning and milling center Max Müller MDW 20 M C axis Driven tools Tool changer Tool magazine Automatic sliding door on the left Oil mist extraction Belt filter system The machine is technically and optically ...

Ref. 449 Groove and perforation machine " Max Mohrstedt, BERLIN C. 19 " Built around 1900 Working width approx. 60 cm Groove and perforating comb weight 210 KG Condition: Tested, Functional / Perforating comb usable length approx. 55 cm  ...

• more information

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 1.3 kW 2800 rpm at 50 Hz -Voltage: 380 volts -Mounting shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg ...

• more information