We offer Adsorption dryer 2 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-3 The system is part of a compressed air system in a production hall. It is used, built in 2016, and fully functional, in very good condition and is offered - due to restructuring of the hall use at our customer. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75 with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1038 - Operating hours: - will be added - Max operating temperature air: 0° C  ...

We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar  ...

We offer Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control Picture 1-11 The system is part of a compressed air system in a production hall. It is used, built in 1995, and fully functional, in good condition and is offered by our customer due to the restructuring of the use of the hall. The display will be updated even further specifications: - Manufacturer: Kaeser Coburg - Model: Screw compressor Kaeser CS 121 with air intake duct from the outside and inside with flap control - LANDIS & GYR SQR 65.1 actuator for air flaps - Year of construction: verm 1995 - Machine No.: 1210382 - Operating hou ...

Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/ ...

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 20 ...

x-travel: 9700 mm y-travel: 3500 mm z-travel: 640 mm w-axis: 3000 mm Control: Siemens type: 840D PL spindle diameter: 200 mm Spindle capacity: 85 Kw surface area: 9000x2800 mm Table load: 40000 kg high speed spindle taper ISO: 50 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 193,8 t dimensions of the machine ca.: 22,4x10,2x8,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 17700 mm y-travel: 4755 mm z-travel: 800 mm milling width: 3450 mm distance table - vertical milling spindle: 3682 mm table height over floor: 500 mm spindle diameter in front bearing: 200 mm turning speed range: 12 - 450 U/min tool taper: ISO 60 axial adjustment of the spindle slide: 800 mm creep feed: 5 und 50 mm/min feed stepless: 10 - 3000 mm/min cross adjustment of cross beam milling head: 4745 rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min rapid traverse: 2 m/min creep feed: 3 und 30 mm/min feed stepless: 6 - 2000 mm/min vertical adjustment of cross beam: 3682 mm rapid traverse: 1,5 m/min creep feed: 1,25 und 12,5 mm/min feed stepless: 5 -  ...

x-travel: 6600 mm y-travel: 3200 mm z-travel: 1000 mm w-axis: 1750 mm Control: Siemens 840 D column daylight: 2650 mm distance spindle nose and table: 2500 mm table surface area: 6400 x 2250 mm table load: 50 t tool taper: ISO 60 spindle turning speed range: 5 - 2000 U/min table feed: 10 - 15000 mm/min feeds crossrail-slide horizontal: 10 - 10000 mm/min feed: (W) 10 - 2000 mm/min spindle motor: 55 kW total power requirement: 85 kW weight of the machine ca.: 125 t dimensions of the machine ca.: 18 x 9,5 x 6,5 m Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ...

CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max.  ...