Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

type: 6334A Deph of throat -- ramcentre: 450 mm Length: 2500 mm Depth : 2200 mm Height: 3300 mm  ...

• more information

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg ...

• more information

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR