Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, ...

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling  ...

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indr ...

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600  ...

• more information

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

Vacuum forming machine for the production of PS, PVC, PET, blister, tray packaging. The thermoformer works separately forming and punching. The machine is in very good condition and was only used as a back-up machine for 16 years. It has been cleaned and extensively tested. so that it is immediately ready for use. Currently, a tool for trays in the size 125x176 mm is installed (forming tool 3-fold, negative, top), tool size approx. 188x408mm. We are also happy to put you in touch with a very good toolmaker who can produce format tools according to your wishes. Equipment of the machine: Moulding area 350 x 500 mm Film width max. 540 mm Moulded part height max. 100 mm positive -  ...

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.