Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point ...

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point ...

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V500/1.5 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -Content: ltr -Connection: 2 inches -permissible operating pressure: 1.5 bar -centrifugal pump -Manufacturer: EBARA type DWC-V300/1.1 -Dimensions cabinet: 650/800/H1350 mm -Weight: 104 kg

Mobile ring trough mixer with 2 exchangeable mixing blades and 1 exchangeable side scraper for mixing smaller quantities of concrete.  ...

• more information

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by  ...

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

Simple unit for transporting plastic granules, such as PVC from cable recycling. Suction through hopper and 100 mm flex tube. Forwarding by fan/fan in rotary valve for dust removal. By extending the pipes, the unit can also be located further away from the feeding point. The big bags are suspended by height-adjustable chain hooks. The unit consisting of a rotary valve and filter is also adjustable in height. Of course, boxes can also be used instead of big bags. The machine can be inspected and tested with us.

x-travel:550 mm y-travel:400 mm z-travel:360 mm control:Siemens Shopmill 840 D Tilting Axis A Angle:± 100 ° table surface area:Ø 280 mm Spindle RPM:20-12000 1/min spindle drive:9,5 / 14 kW Spindle Torque:90 Nm rapid travel x/y/z:60 mm/min tool magazin::48 HSK-A63 tool diameter:82 (125) mm weight of tools max.:5 kg Tool change time tool/tool, milling spindle:2,4 s total power requirement:15 kW weight of the machine ca.:8,2 t Dimensions (L/W/H):3,8 x 4,1 x 3,3 mm internal coolant system feed:10/20/30/40/50/60/70 bar Motoman robot:NX 100 This is a well maintained vertical 5-axis machining center with coolant through spindle 10-70 bar. Motoman Robot for parts loading

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank ...