Manufacturer: DMG Model: DMU 80T Year of manufacture: 2000 Condition: used Spindle speed (max.): 12,000 rpm Functionality: fully functional Operating hours: 32,590 h on the grid / Working hours: 14,150 h Sensor cable and motor tool changer new Find more here - / Contact us at -  ...

• more information

This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine.

Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.

x-travel: 800 mm y-travel: 650 mm z-travel: 550 mm control: Heidenhain Millplus tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible.

This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine.

x-travel: 350 mm y-travel: 240 mm z-travel: 340 mm turning speed range: 20 - 6.300 U/min feed speeds: 1 - 5.000 mm/min rapid traverse: 5 m/min tool taper: SK 40 power capacity: 6,3 / 10 kW control: Sinumeric 810 D tool change unit: pneumatisch manuell total power requirement: kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ca. 2 x 2 m 11065352834 5-sided universal milling machine Rotary table with swivel axis (clamping surface 400 x 290 mm) Rotation range C-axis displayed 360 ° on the screen B-axis swivel range +105 / -15 ° shown on the screen Table load capacity 100 kg, Operating modes 2 and 3, prepared for Net service, programming instructions included, RS 232 C interf ...

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION