General SKU390X1024 LocationBarneveld CEcheck Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous MaterialMild steel Motor5,5 kW, 400 volt Information MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Year of construction2020 Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clampi ...

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 10 ...

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the ...

Complete used NH3 (Ammonia) freezer installation for freezing carton boxes. This set includes a Grasso RC 6311 two-stage reciprocating compressor. The freezer has the following capacities: - Capacity 15T/24H at -24° C - Carton box weight 12-15 kg/each - Capacity 2.000 box/24h - In/output 80/90 box an hour Please feel free to contact us for more information!

OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton Erector/ Bottom Flap folder & adhesive tape Bottom flap sealer, Carton top Flap Openner & PE Film Carton Liner from a Roll of Film Full Stainless Steel Construction, Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll., Carton Sizes: L x W x H, 250 mm x 200 mm x 150 mm (min), 600 mm x 475 mm x 600 mm (max) Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls, Condition: as new, Immediately available EXW our Warehouse Enger, Germany, Length: 200 to 600 mm, Width: 200 to 500 mm, Carton size min.: 250 mm x 200 mm x 150 mm, Carton Size max.: 600 mm x 475 mm x 600 mm

General SKU236T271 MakeCyklop (DE) TypeCT-50/50 No.062/C91 Year of construction1991 LocationBarneveld Main Features MaterialMild steel Motor0.185 KW Specified Features - Miscellaneous Motor0,185 kW 220/380 - 240/415 Volt. MaterialMild steel With jacketcheck General Floor space0,6x1 m Total height1,55 m Weight200 kg Extra Specificationsdimensions of the belt feeder 300x900 mminlet width: 120 mm - 400 mminlet height: 120mm - 520 mmwidth of adhesive roll: 50mmMiscellaneousCyklopMiscellaneous > MiscellaneousBrand > Cyklop What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide - ...

Machine 1 Elopak Carton Filling Machine - Manufacturer: Elopak - Machine type: carton filling machine - Control system: Siemens Simatic Panel PC - Configuration: Dual lane (Line 1 and Line 2) - Total carton counter (machine lifetime): over 461 million cartons - Condition: Used, currently installed and in production - Total picker counter (lifetime): 462,280,647 cartons - Total outfeed counter (lifetime): 461,210,559 cartons Machine 2 Meurer MTP 25-B 400 Tray and Wrap-Around Case Packer - Manufacturer: Meurer - Model: MTP 25-B 400 - Year of manufacture: 2011 - Main motor operating hours: 68,742 - Air supply: 6 bar - Speed: up to 25 cycles per minute - Formats: simple trays, wrap-around cas ...

Used Used Bortolin Kemo carton sealer: Year: 1998 Condition: As Is Model: Mara H.M. Year: 1998 Speed: 21 CPH Top hot glue closure Hot glue system: NORDSON Problue 7 - 1022232A Carton format (number and layout of bottles per carton) - width min. 150 mm - max 400 mm - length min. 200 mm - max 500 mm - height min. 130 mm - max 400 mm Safety protection Code: C 84 More details: https://bottlingscout.com

Impressions=0 m, Condition= New , Availability= 2026-07-07, ? Can mount different boxes on two strips at the same time ? German servo motor system ? German Siemens and Schneider electrical system ? PLC touch screen ? Glueing system with motor control ? Capability to work in different ways with plate ? Gathering system at delivery unit can be adjusted and connected according to job ? Voltage: 380V/50Hz ? Covering area: 4.0 1.4M ? The total power: 8Kw ? Maximum production speed: 400pcs/min ? Air pressure: 0.6Mpa (Dry and clean compressed air) ? Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm ? Blank length(L): 100mm – 450mm  ...