Manufacturer: AgieCharmilles Model: EDM DRILL20 Year of Manufacture: 2013 Type of Machine : Start hole EDM machine Technical Specifications - Drill Diameters: 0.5 mm, 1 mm, 1.5 mm, 2 mm - Travel Distances: X 300 mm / Y 200 mm / Z 300 mm - Phase: 3 - Voltage: 380 V - Power: 4 KVA - Frequency: 50 Hz - Current: 4.5 A - Short-circuit Current: 10K A - Weight: 875 KG Condition and Accessories The machine is in used condition with normal signs of wear. Extensive accessories are included. Find more here - / Contact us at -

Manufacturer: AGIE Model: FUTURA V 1PM Electrical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phase: 3 PH - Circuit Breaker Power: 17 kVA - Power Factor (Cos φ): — - Full Load Current: 15 A - Full Load Power: 3.9 kVA - Amp Rating of Largest Motor/Load: 3.4 A - Overcurrent Protection: 20 A @ 480 V ~, 18000 AIC Weight: 265 kg Condition and Maintenance: Last service performed at the end of 2021 (running hours: 9107). The machine has been used only a few hundred hours since. Overall in good condition. Find more here - / Contact us at -

This 3-axis AGIE AGIECUT CLASSIC S erosion machine was manufactured in 2000. It has impressive axis movements with x=350mm, y=250mm, and z=256mm, providing ample flexibility for handling erosion tasks. The machine accommodates a maximum piece size of 750mm in length, 550mm in width, and 250mm in height, and it can manage weights up to 200kg. The dimensions and capabilities make it suitable for a wide range of erosion processes, ensuring detailed and precise outcomes. The AGIE AGIECUT CLASSIC S machine we have for sale is designed for robust performance and precision. Contact us for more information about this erosion machine.

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition:  ...

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK- ...

Manufacturer: AGIE Model: Challenge 2 eCut Year of Manufacture: 2005 Type of Machine : Wire EDM machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 94,635 hours - Eros. Std.: 29,232 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 350 mm - Y axis: 250 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - SF module generator for fine finishing: Ra 0.12 - 0.2 um - 3D measuring probe for automatic part alignment on the machi ...

Manufacturer: AGIE Model: Challenge 3 eCut Year of Manufacture: 2004 Type of Machine : Wire EDM Machine Condition: Used, fully operational All annual maintenance documented Operating Hours - Re: 109,008 hours - Eros. Std.: 27,172 hours Electrical Data - Weight: 4,400 kg - Voltage: 3 x 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Short-circuit current: 10 kA Travel Distances - X axis: 500 mm - Y axis: 350 mm - Z axis: 256 mm - U axis: +/- 70 mm - V axis: +/- 70 mm Technical Features - Wire diameter: variable from 0.1 to 0.3 mm (open guides) - Konik-Plus for very precise conical cutting - Surface finish down to Ra 0.3 um - 3D measuring probe for automatic part ...

This 3-axis AgieCharmilles Cut-20 P wire EDM machine was manufactured in 2016. It features a power of 11 kVA and operates at a voltage of 380 V. The machine weighs 2,890 kg and comes with complete documentation, manuals, and optional accessories. If you are looking to get high-quality wire EDM capabilities, consider the AgieCharmilles Cut-20 P machine we have for sale. Contact us for further details.

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to ...

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg