2249 offers used facing lathes WMW

Category: 102 lathes / Facing Lathes
Latest update: 21.04.2020 item-No.: 146059717
approved
dealer
New in: used
Seller: country-nl Handelsonderneming J. Kelders bv
Price: 6.750 €

Brand: WMW Model: DP1250 Serial number: 33-158 Capacity (Kw) 18.5 Voltage 380 - 220 Rpm 12 speeds 80 - 355 Amperes (A) 38 Dimensions LxWxH (mm) 3000 x 2500 x 2250 Weight (Kg) ca 6000 • max. rotation diameter (mm) 1250 Made in Germany Length shift (mm) 900 Condition of sale As / is condition, direct builded out from 1st owner, older but tidy machine, incl. 4 jaw chuck 1000mm

Category: 102 lathes / Facing Lathes With Tailstock
Latest update: 06.10.2019 item-No.: 120876761
approved
dealer
New in: 1986
used
Seller: country-nl Valk Machines B.V.

Tip height: 1250 mm Turning diameter: 2,500 mm over bed Centre distance: 4.000 mm Support motion: 750 mm longitudinal feeds 630 mm cross feeds Face plate: Ã? 1250 mm Spindle speed: 5.6-280 RPM. Spindle bore: 100 mm Workpiece weight: 10.000 kg Equipped with: -Floor plates 4.500 x 2.200 mm -Powered tailstock -Operating instructions Country of origin: Germany Engine power: 45 kW Machine weight: 18,000 kg Machine Lxwxh: 8,000 x 4,000 x 2,100 mm

Category: 102 lathes
Latest update: 17.02.2020 item-No.: 145077159
New in: 1994
used
Seller: country-de Gerd Seidler Werkzeugmaschinen

faceplate diameter: 3550 mm total power requirement: 55 kW weight of the machine ca.: 29 t centre height: 1250 mm turning diameter: max. 4500 mm turning speeds: 0,9 - 90 U/min feed: 0,06 - 8 mm/min bed height over floor: 560 mm bed slide: 1300 mm cross slide - travel: 750 mm travel of compound slide-rest: 620 mm max. torque on the faceplate: max. 50 kNm flute distance: 250 mm Rapide traverse: 5000 mm/min digital readout: Heidenhain POSITIP 855 turning length: 750 mm Plate field: 1 Supports: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
Latest update: 26.05.2020 item-No.: 146562750
New in: 1970
used
Seller: Schiess-Moweg GmbH

turning diameter over bed:1600 mm turning diameter over slide rest:1200 mm turning length:2000 mm turning diameter in the gap:2300 mm max. workpiece weight between centres:8000 kg main drive:37 kW bed width:1400 mm spindle passage:100 mm spindle turning speed range:2 - 140 U/min faceplate diameter:1600 mm weight of the machine ca.:37 t total power requirement:45 kW dimensions of the machine ca.:4,6 x 2,4 x 2,1 m heavy duty lathe with separate headstock - new thyrsistor controled main drive, digital readout and switch cabinet in 2008 - thyristor controled main drive motor - self feed for top slide - foundation plate including spindle box base

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 21.04.2020 item-No.: 146059718
approved
dealer
New in: used
Seller: country-nl Handelsonderneming J. Kelders bv
Price: 12.900 €

Brand: WMW Model: DLZ800 / 6000EL IV Serial number: 16010257 Capacity (Kw) 22.4 Rin 19 speeds 11.2 - 1800 Amperes (A) 44 Dimensions LxWxH (mm) 8600 x 1700 x 1810 Weight (Kg) ca 8000 Peak width (mm) 6000 Peak height (mm) 400 • Pass-through axes (mm) 74 • max. rotation diameter (mm) 800 Made in Germany Comments Good optic condition for his age, incl. 1x fix steady, manuals, toolholders, 4 jaw chuck 800mm & 400mm, 3 jaw chuck 400mm

Category: 102 lathes / Heavy Lathes
Latest update: 08.10.2018 item-No.: 127802885
New in: 2014
used
Seller: country-de Karl Wrede
Price: 300.000 €

WMW Zerbst DP 4000 ... DP 5000 heavy duty facing lathe - faceplate diameter: 4.420 mm - max. turning diameter over slide: 4.000 mm - max. turning diamter: 5.000 mm - max. turning length: 18.000 mm (or longer using more floor plates) - 36 kW motor - spindle speed range: 0,9 - 56 - maximum workpiece weight between centers: 20 t - flying maximum workpiece weight: 12.5 t Including: - 2 pcs. of carriages with 4.500 mm turning length - set of plate field / floor plates - 1 pcs. roller block - 1 pcs. tailstock Machine was overhauled 2014 in Italy including completely new electrical control (i.e. infinitely variable speed), cable set and cabinets and then no longer was commissioned. Machine is disassembled and stored in Schleswig-Holstein/Germany. We are the owner of the machine. Functions of the machine can demonstrated under power.

Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65282605
approved
dealer
New in: used
Seller: country-be APT International

Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65282608
approved
dealer
New in: used
Seller: country-be APT International

Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65282147
approved
dealer
New in: used
Category: 102 lathes / Heavy Lathes
Latest update: 02.08.2018 item-No.: 126650494
approved
dealer
New in: 1976
used
Seller: country-ro PRESSTRADE Romania

Heavy duty lathe ZERBST type DPS 1600 x 3000 faceplate diameter: 1.250 mm center height over bed: 800 mm max. turning diameter over bed: 1.600 mm max. turning diameter over carriage: 1.200 mm max. turning diameter in front of the bed: 2420 mm max. turning length: 3.000 mm max. workpiece weight between centers: 8000 kg spindle bore 100 mm main motor power: 30 kw 3 (three) bed ways construction With 1 pc. steady rest. Location: PRESSTRADE Romania warehouse, near Oradea, in ROMANIA.

Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65284511
approved
dealer
New in: used
Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65284270
approved
dealer
New in: used
Category: 102 lathes
Latest update: 16.09.2017 item-No.: 65281221
approved
dealer
New in: used
Category: 101 boring mills and machining centers
Latest update: 26.05.2020 item-No.: 146562560
New in: used
Seller: Pagus Maschinenhandel

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

Category: 107 sheet metal working
Latest update: 17.07.2018 item-No.: 110009856
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 650 €

Shaft diameter: 32 mm roll diameter outside: 60 mm Extension: max. 150 mm engine speed: 60 rpm Working method: motorized Connection: 0.55 kW Zubehoer/Equipment: foot switch Condition: good Weight: 0.4 t Dimensions: 1,000 x 1,100 mm frame: 750 x 400 mm ; good

Category: 101 boring mills and machining centers
Latest update: 07.04.2020 item-No.: 1177088
approved
dealer
New in: 1976
used
Seller: country-de ZOMA Maschinenhandel

Horizontally table drilling work, uses horizontally boring and milling machine, used type type: BFT 100/II manufacturer / make: WMW construction year / year of make: In 1961 Spindel-?/? of spindle: 100 mms spindle adjustment / max. traverse of spindle: 900 mms tool admission / taper of spindle: Send in Morse 6 working spindle speeds / speeds of spindle: 5... 500 U/min // rpm vertical way of the spindle / vertical awy of spindle: 1,120 mms table size / work surface of rotary table: 1250 x 1,120 mms table across way / transverse traverse of table: 1,250 mms Tischlaengsweg / longitudinal traverse of table: 1,650 mms max. table load / max. weight of job: 3 t Drehbarkeit of the table do gymnastics of table:

Category: 107 sheet metal working
Latest update: 17.07.2018 item-No.: 110009857
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 650 €

; Good

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145138945
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 490 €

Pneumatic centering screw, Vice-scale with clamping drive .br />"br />WMW"br />"br />Jaw width: 160 mm"br />"br />Jaw height: 50 mm" />"br />"br />Span: 0...200 mm-br />-br />with pneumatic clamping drive JU 30"br /> "br />" />used ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145142017
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 2.650 €

Angular table with adjustable attachment, clamping angle, T-slot plate sbr />"br />WMW - Consists of 2 parts."br /> "br />"br />"br />"br />Clamping surface: 1600 x 850 x 680 / 760 mm" /> br />Nut width: 20 / 38 mm /> />"br />Hole spacing at the foot: 130 mm "br />"br />"br />Dimensions: 1600 x 850 x 680 / 760 mm" />

Category: 103 milling machines
Latest update: 17.07.2018 item-No.: 126322434
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 7.600 €

Table: 2.000 x 600 mm Clamping surface: 1600 x 600 mm Procedures: Spindle retainer: Iso50 Spindle speed: 35.5-1,800 RPM Port: 21 kW Equipment and accessories: Condition: good Weight: 4.3 t Mass engine: 2,600 x 2,100 x 2.400 mm Dimensions cabinet: 1,200 x 600 x 1200 mm

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145142018
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 220 €

3- Baking fodder />"br />WMW NILES"br />"br />DHK 200x3"br />"br />"br />"br />"br />"br />"br />Flange: 155 mm" />"br" />Bore: 60 mm />"br />Hole circle: 175 mm" />"br />"height with jaws: 125 mm" /> "br" />"br />Feed number: 507"br />"br />"br />Dimensions: 200 x 200 x 125 mm

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145113348
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 150 €

Category: 107 sheet metal working
Latest update: 26.05.2020 item-No.: 146562820
New in: used
Seller: SALING Werkzeugmaschinen GmbH

chamfer lenght:2000 mm plate thickness:2,5 mm distance between columns:250 mm bending beam:125 mm weight of the machine ca.:2500 kg dimensions of the machine ca.:3200 x 1000 x 1700 mm

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145123332
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 50 €

Category: 103 milling machines / Tool-Milling Machines
Latest update: 26.05.2020 item-No.: 145089540
approved
dealer
New in: 1988
used
Seller: country-de Christoph Busch GmbH

x-travel: 1.000 mm milling-head swivable +/-: ja automatic dividing head: ja tool taper: SK40 table swivelabel +/-: ja weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 16.09.2017 item-No.: 65281541
approved
dealer
New in: used
Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145123333
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 50 €

Category: 109 other metal working machines
Latest update: 17.07.2018 item-No.: 110010117
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 1.000 €

Diameter: 450 mm Pitch: 650 x 540 mm Zubehoer/Equipment: with swivel device Condition: good weight: 450 kg Dimensions: 800 x 600 x 400 mm ; good

Category: 112 gear cutting and hobbing machines / Gear Hobbing Machines
Latest update: 09.04.2020 item-No.: 125551109
approved
dealer
New in: 1975
used
Seller: country-de KAI-Tec Technologie-Vertrieb GmbH & Co.KG

HORIZONTAL gear hobbing machine WMW ZFWZ 250 X 2.5 - 20-13-010 delivery time: immediate number: 20-13-010 manufacturer: WMW type: ZFWZ 250 x 2.5 MACHINE data year: approx. 1975 L x W x H: approx. 2000 x 1500 x 1700 mm weight: approx. 950 kg Good general condition specifications of maximum workpiece Ã?: approx. Ã? 250 mm max wheel width: approx. 125 mm min. module: approx. 0.5 Max module: approx. 2.5 table bore: MK 3 distance cutters - workpiece: approx. 11-160 mm speed range: approx. 110-220 RPM Max cutter Ã? : approx. Ã? 80 mm Helix angle: 10 / 30 & 45 degrees-smallest number of teeth: 6 piece table - diameter: approx. Ã? 150 mm power: approx. 1.5 kW accessories â?¢ operating instructions â?¢ coolant system â?¢ various change gears â?¢ various hobbing cutter â?¢ various Spa nndorne Ac ...

Category: 103 milling machines
Latest update: 17.07.2018 item-No.: 126322438
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 1.000 €

Travel x-y-z: 380 - 140 - 230 mm Table: 630 x 200 mm Speed range: 45 to 500 rpm (710 ?) Spindle holder: SK 30 Feed: Connection: 2.3 kW Accessories/Equipment: vertical head, slide, counter bearing Condition: bad, must be overhauled Weight: 0.85 t Dimensions: 1,000 x 750 x 1,100 mm

Category: 109 other metal working machines
Latest update: 17.07.2018 item-No.: 110010118
approved
dealer
New in: used
Seller: country-de Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Price: 1.000 €

; well

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145138694
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 240 €

3-jaw lining, Three-jaw linings s/>-br/>WMW-br />-br />DH-B 200x3x6 ( DH-B200x3x6 ) .br />"br />TGL 30-2332"br />"br />"br />Outside:200 mm-br />"br />"br />Hole circle : 133,>5 mm-br />-br />Bore: 54 mm-br />-br />Height with jaws: 140 mm-br />"br />"br />"br />"br />Dimensions: 200 x 200 x 121 mm"br />"br /> "br"br />"br />"br />"br />

Category: 110 accessories for machine tools
Latest update: 16.09.2017 item-No.: 65281543
approved
dealer
New in: used
Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145113351
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 65 €

Three-jaw chuck, three-jaw lathe chuck -Food size d 250 mm -without interchangeable jaws -Admission thread O 78 mm outside -Slope 5.5 mm -Weight 26 kg

Category: 1300 other machines and plants
Latest update: 26.05.2020 item-No.: 145141767
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 140 €

Air-brake grinders, compressed air straight grinders,br />br />WMW-br />-br />-br />-br />-type 1508-br />-br />10500 U/min-br />-br />-br/>-br/>-br/>----------------------------------------------------- ---------------------------------------------------------------------- ---------------------------------------------------------------------- -------------------------------------

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145142279
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 440 €

3-jaw food, three-jaw food, Rotary chuck sbr />"br />WMW NILES"br />"br />DH-B 315 x 3 x 6"br />"br />"br />"br />"br />"br />"br />"br />"br "br"br />"br />"br />"br />"br />"br />"br />"br />"br/>"br/>"br />"br />"br />"br />"br />"br />"br />"br/ >Height with jaws: 130 mm/>br />br />Hole circle: 33 / 290"br /> "br />" Recording: M14-br />-br />3 Baking extra-br />"br />Speed max.: 1800 rpm/min.br />"br />"br />min. 20-240 mm.br />"br />max. 75-240 mm-br />-br />complete with inner and outer jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Category: 102 lathes / Heavy Lathes
Latest update: 26.05.2020 item-No.: 145089543
approved
dealer
New in: 1984
used
Seller: country-de Christoph Busch GmbH

control: Mitsubishi M10 centre distance: 10.000 mm steady: 3,5 capacity: 30 t control: auf x- und z-Achse chuck: 1.500 mm circulation diameter max.: 2.000 mm weight of the machine ca.: 38 t Retrofitted in 2009: under power in Hueckeswagen: : from foundation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 07.04.2020 item-No.: 5523464
approved
dealer
New in: 1983
used
Seller: country-de ZOMA Maschinenhandel

Stanzpresse , gebraucht Punching,used Exzenterpresse mit festem Tisch und verstellbarem Hub, gebraucht eccentric press with fixed bed and adjustable stroke, used Typ/ type: PEE II 250 Baujahr/ year of make: 1983 Hersteller/ make: Blema Gotha WMW Preßkraft/ rated pressure: 250 t Tischgröße/ table dimensions: 1200 x 800 mm Stößelfläche surface of slide: 900 x 670 mm Stößelhübe im Leerlauf / number of strokes at idle operation: 50 pro min Stößelverstellung / adjustment of slide: 110 mm Einbauhöhe zwischen Tisch und Stößel bei größtem Hub unten, Verstellung oben / max. distance bed to slide: 400 mm Hub / stroke: 40..160 mm Ausladung / gap:  ...

Category: 1300 other machines and plants
Latest update: 26.05.2020 item-No.: 145136904
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 90 €

Clamping cylinders, hydraulic cylinders, single-acting, spring-reset/>-br/>WMW-br />-br />-br />"br />"br />Type 25-br />"br />TGL 30-7311"br />"br />"br />Piston force: max. 7800 N.br /> br />Piston Diameter: 25 mm />br />Br />Rod Diameter: 14 mm />"br />"br />Stroke: 20 mm" />"br />"br />"br />"br />"br" />"br/>"br"/>"br/>"br/>Dimensions: 120 x 36 x 36 mm"

Category: 1300 other machines and plants
Latest update: 26.05.2020 item-No.: 145137672
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 350 €

Clamping cylinders, hydraulic cylinders, double-acting />br />WMW, HOHENSTEIN-br />-br />-br />-br />-br />Hub: 150 mm-br />-br />-br />-br />Stangendiameter: 56 mm-br />-br />u. a. as a spare part for Hohenstein RBT400 ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Category: 107 sheet metal working / Straighteners
Latest update: 28.02.2020 item-No.: 123727368
approved
dealer
New in: 1983
used
Seller: country-de Reinhold Schmitt GmbH

material width 1.600 mm material thickness 6,00-20,00 mm number of leveling rolls: 11 leveling roll diameter 160 mm straightening speed 10 m / min. adjustment 10 - 40 mm coil weight app. 35,0 t total power requirement 76 kW space requirement app. 4,00 x 5,00 x 3,00 m machine weight app. 39.2 t in cassette construction work rolls are supported by back up rolls accessories: 1 set interchangeable cassettes

Category: 103 milling machines / Vertical Knee-Type Milling Machines
Latest update: 07.04.2020 item-No.: 140523530
approved
dealer
New in: 1978
used
Seller: country-de ZOMA Maschinenhandel

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145113354
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 290 €

Category: 103 milling machines
Latest update: 26.05.2020 item-No.: 146558218
approved
dealer
New in: used
Seller: country-de Surplex GmbH
Price: used machinery auction RESALE 800 €

Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 2800 x 2000 x 2300 mm Description: Dimensions 350 x 800/I, serial number 2833/72, total weight 1.7 t, frequency 50 Hz, operating voltage 380 V, control voltage 220 V, connected load 3.5 kW, rated current of the machine 9 A, with vice and accessories, workshop cabinet with contents: drill, milling cutter, vice on milling machine jaw width 100 mm, clamping sleeves in wooden box, digital display MITUTOYO

Category: 1300 other machines and plants
Latest update: 26.05.2020 item-No.: 145141770
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 90 €

Hand-pressed pliers for interchangeable press jaws.br />"br />WMW"br />"br />"br />PZ 60.1-U"br />"br />"br />"br />"br />1 x pair of press jaws" />"br />"br />1 x Pair of cutting jaws />"br />"br />other accessories: W325"br /> "br " />"br />"br />" />" />"br />"br />Dimensions: 650 x 220 x 55 mm"br />

Category: 102 lathes / Multi-spindle turn automatics
Latest update: 20.05.2019 item-No.: 135839498
approved
dealer
New in: 1987
used
Seller: country-de SWH-GMBH

Curve-controlled multi-spindle turning machine Number of rotary spindles: 6 Largest rod diameter: Round material: 32 mm Six-edge material: 27 mm Square material: 28 mm Largest bar length: 4000 mm Largest turning length: 105 mm Largest main sleigh hub: 135 mm Fabr. # 0250002-12 Series: 0250002 Weight: 10.2 to. More data on request

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145113355
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 150 €

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145119499
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 40 €

Category: 109 other metal working machines
Latest update: 26.05.2020 item-No.: 145122059
approved
dealer
New in: used
Seller: country-de Theodor Eberlei GmbH & Co.KG
Price: 150 €

Category: 1300 other machines and plants
Latest update: 26.05.2020 item-No.: 145141771
approved
dealer
New in: used
Seller: country-de Pagus Maschinenhandel Online Shop
Price: 190 €

Accessory set for hand press pliers, replaceable press jaws />"br />WMW"br />"br />PZ 60.1-U"br />"br />"br />Contents:"br />"br />17 x Pair of press jaws"br />"br />"br />2 x Cutting jaw pair •br />"br />matching hand-pressed pliers: W324-br />"br />" in a metal case"br /> "br / > " />"br />"br />"br />Dimensions: 450 x 200 x 55 mm"br />

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)