used WMW gear cutting machines

MAX DIAMETER 1500 MAX MODUL 15

max diam 250 , max modul 5

max diam 670 , max modul 12

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

Code 151301 DESCRIPTION Gear Hobber Ø 250 x modul 6 Make Modul Model ZFWZ 250/3 Serial number 112 625 Year ± 1983 Ma. Workpiece diameter 250 mm Max. modul 6 Max. axialmovement 275 mm Max. tangential movement 100 mm Max. gearangle setting 45 degrees Max. diam. millingcutter 145 mm Max. millingcutter length 170 mm Diameter clampingtable 275 mm Diameter tablcenter positioning 200 mm Distance millingcutter to clampingsurface min/max. 195 – 470 mm Distance middle millingcutter to center table 20 – 230 mm Millingspeeds in steples in 2 Ranges 20 – 200 rpm 125 – 400 rpm Feeds axial 0.2 – 100 mm/wheel/rounds radial 0.025 – 4 mm/wheel/rounds tangential 0.1 – 5 mm/wheel/rounds Power main motor 7.5 kW – 380 Volts Power connection 22 kVA Accessories Chipconveyor All speedchang ...

Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.

Hobbing machine Manufacturer WMW Type ZFWZ 1250 x 14 diameter 1250mm module 14 Machine is in a used good condition. Ink. Documentation and interchangeable wheels

Gear Hobber WMW MODUL ZFWZ 1500 x 15

Max diam 250 , max lenght 2000, 3 x heads , change gears

Inv. Num. : 6256 Type: ZSTWZ Producer: WMW Created: 1954 Parameters: Maximum gear diameter (outer teeth): 1000 mm Table diameter: 900 mm Machine dimensions: 3000x1200x2300 mm External. internal module M 1 - 8

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Key data: 500 mm, 300 mm, 5

I am selling a well-used gear milling machine from WMW Modul, model ZFWZ 500x5. The machine is fully functional and runs without any problems. The foot (coolant device) and the entire machine were completely cleaned. The connection cable and plug were replaced. When sold, the entire oils are renewed. Largest wheel diameter is 500mm Largest module is 5. The weight of the machine is 1950kg. Incl. complete, original cabinet with interchangeable wheels and an instruction manual. The machine has already been overhauled. The guides show almost no signs of wear. If you have any further questions, please do not hesitate to contact us. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. Returns are excluded. All information is subject to change.

Key data: 250 , 400 , 10

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max diam 340 , max modul 8

Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional

Feed gear WMW 1 : 0.66 one revolution of the gear causes 2/3 revolutions of the shaft drive shaft: internal spline shaft profile: diameter: Ø 13 / 17 mm, depth: 75 mm for spline shaft: 4 wedges, width: 8 mm accessories for RUHLA - milling machine used, tested ! Dimensions: 370 x 225 x 220 mm

Feed gear WMW 1 : 3 one revolution of the gear causes 3 revolutions of the shaft drive shaft: internal spline shaft profile: diameter: Ø 13 / 17 mm, depth: 55 mm for spline shaft: 4 wedges, width: 8 mm accessories for RUHLA - milling machine used, tested ! Dimensions: 335 x 260 x 170 mm

Description: Control type: conventional, technical details: tool holder MK4, tool diameter max. Ø 145 mm, table size L: 800 x W: 700 mm, clamping surface Ø 300 mm, table travel 200 mm, division max. 5 module, total power requirement 7.5 kW, machine weight approx. 4.9 t, space requirement approx. 2.8 x 1.5 x 2.3 m, additional information: Application: Gear hobbing machine for gearing straight and helical spur gears, worm gears as well as rollable profiles, cycle milling and individual milling as well as counter and synchronous milling , Information on the machining of spur and worm gears: -Outside Ø max. 250mm with counterholder -Division max. 5mm (module), -Tooth bevel max. 45°, -Tooth width max. Axial milling 200mm and radial-axial milling 240mm, -Milling width max. clamping table counterholder 655mm, milling slide: -swivel 210°, -travel path 350mm, -feed, 2 directions, 16 steps in ...

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden

Turning tool, special accessories WMW TGL 30-1201 ( TGL30-1201 ) Dimensions: 185 x 120 x 55 mm

Turning tool, special accessories WMW TGL 32680 ( TGL32680 ) shaft: Ø 20 mm Adapter: Ø 8, 10, 12 mm Dimensions: 185 x 120 x 55 mm

diameter range 3-10 mm cutting length 2000 mm speed - meters/min 22-71

Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2 - 3/4 inch -Weight: 6 kg

Key data: 250 mm, 500 mm

Circulation diameter over bed 500 mm Max. turning length 1,600 mm Connected load 5.5 kW Machine weight 4.4 t

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg