Machine for chamfering of HSS and segment circuit saegen - Saegeblatt: 80 - 910 mm - Grinding wheels: 200 x 32 mm - Weight: approx. 1800 kg - Full cladding - integrated wet grinding device - Signal lamp for displaying the end of work - Halogen lamp - Central lubrication - Accessories - Operating instructions

Circular saw blade Anfasautomat The BK 450 circular blade contact machine automatically handles the lateral chamfering or bending of HSS saegee blowers up to 450 mm in diameter. The special feature of the machine is that it is connected to two separate grinding units and thus the saege leaf is fasted on both sides at the same time. This means lower ruest and faster grinding times. Diameter range: 50 - 450 mm Tooth pitch: 2 - 12.5 mm Saegeblatt thickness: max. 4 mm CBN (for groove grinding): 25x 8 and 30x 8 mm CBN or bakelite: 60 x12 mm Weight: approx. 115 kg Dimensions (L x W x H): 735 x 630 x 1350 mm

Sawblade diameter maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Saw blade diameter: from: 50 mm up to: 450 mm Tooth width: 25 mm Tooth height: 8 mm Max. saw blade thickness: 8 mm Clamping angle: 0 - 25 ° Diameter of grinding wheel: 110 - 120 mm Voltage 50 Hz 3x: 380 Volt Power: 0.7 kW Machine´s weight about: 110 kg Overall dimensions machine: Length: 330 mm Width: 330 mm Height: 1200 mm Various accessories: Lamp

Sawblade diameter maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Saw blade diameter: from: 50 mm up to: 450 mm Tooth width: 25 mm Tooth height: 8 mm Clamping angle: 0 - 25 ° Diameter of grinding wheel: 110-120 mm Voltage 50 Hz 3x: 380 Volt Power: 0.7 kW Machine´s weight about: 110 kg Overall dimensions machine: Length: 330 mm Width: 330 mm Height: 1200 mm Various accessories: Lamp Dust extractor

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws  ...

• more information

Saw blade grinding machine, tool grinding machine, grinding machine, circular saw blade sharpening machine, saw blade sharpening machine -Manufacturer: Loroch, saw blade sharpening machine type SW with dust extraction -Saw blade diameter: approx. 50 to max. 470 mm -Whetstone: Ø 150 x 1.5 x 30 mm -Individual components: see photos -Dimensions: grinder 630/430/H1080 mm / suction 300/300/H700 mm -Total weight: 141 kg

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thicknes ...

Suitable for resharpening of CV-, bimetal and carbide tipped bandsaw blades from 8 - 80 mm width., Accessories:, Coolant System,, Hood,, Free programmable tooth forms,, 1 bandsaw mount,, 1 grinding wheel mount., Sawblade band width: 8-80mm, Tooth pitch: 3-34mm, Sawblade thickness: approx. 0.5 - 3 mm, Sawblade length: min. 1400 mm or min. 2800 mm - max. 7000 mm, rake angle: -10 to +25 degrees freely selectable, grinding speed: approx. 100 – 600 mm / min, Radius disk: (14F1) CBN or DIA, Grinding wheel diameter: 200mm, max. grinding wheel width: 3 mm, Grinding wheel bore: 32 mm, grinding motor: 0.5kW, Connected load approx.: approx. 1.5 kW (400 V / 50 Hz), Weight approx.: 370 kg, Dimensions W ...

Description: Serial Number: 86100 Grinding wheel: CBN - diamond 1.3 to 6mm CBN bore: 32mm Operating speed: 60m/s Circular saw blade diameter: 80 - 560mm max. circular saw blade thickness: 6mm Tooth shapes: Curved tooth (B, C according to DIN 1840), pointed tooth / angled tooth (A according to DIN 1840) Connected load: 7.0kW Grinding motor power: 2.2kW Accessories: 3x grinding wheel holder, blade holder F-1004, F-1008, F-1009 Operating instructions, circuit diagram, spare parts list For processing HSS and solid carbide circular saws. These can be resharpened, re-toothed and chamfered. The specified tooth form curve is achieved via two controlled axes. During the grinding process, ...

Type WLG Made in Germany 1981 y.  ...

• more information