takım tezgahları için aksesuarlar kullanılmış satılık

Round table probably Walter with a diameter of 380 mm.

length: 125 mmwidth: 100 mmheight: 70 mm: - mmweight of the machine ca.: 0,5 Kgdimensions of the machine ca.: 0,15 x 0,15 x 0,07 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5413 Type: SN 542 Producer: FEDEK Created: 2008 Parameters: Maximum bar length: 3000 mm Rod diameter: 42 mm Weight: 800 kg Length: 4000 mm Width: 1000 mm Height: 1500 mm

range L-W-H: 675 x 510 x 880 mmweight: 56 kg: 5 St.Professional tool trolley for workshop equipment.Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm.Inner dimensions of the lower drawer 56 x 43 x 17 cm.Dimensions of the wheels 100 x 30 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6118 Type: Liftmaster L3030 Producer: TRUMPF Created: 2002 Parameters: In good technical condition.

Number of tools: 228 St.weight: 14,5 kgrange L-W-H: 440 x 330 x 150 mmTool trolley filled with:3 pcs. Different socket sets, double end wrench,Double ended ring spanners, wrenches, pliers different,Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.Tool Steel: Chrome Vanadium5 pcs. Drawers filled with tools2 pcs. Drawers emptyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg

length: 125 mmwidth: 125 mmheight: 60 mm: 125 mmweight of the machine ca.: 0,5 Kgdimensions of the machine ca.: 0,15 x 0,15 x 0,06 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 pieces used leveling shoes L =37 cm x W = 22 cm set height as on the pictures is 10cm, the leveling shoes have at the top a approx. 20mm and at the bottom a approx. 7mm plastic support,

table length: 600 mmtable width: 240 mmx-travel: 370 mmy-travel: 130 mmtable height: 165 mmweight: 60 kgdimensions: 0,8 x 0,45 x 0,2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Euromate SCS + Coral PR/7.5 - Dust Extraction / Welding Fume Extraction Euromate SCS Air Filtration System - Air filter for welding fumes - 2 cartridge filters (need to be replaced) - Year of construction 2001 Coral PR/7.5 Extraction System - Motor power 5.5 kW - Speed 2800 rpm - Inlet diameter 400 mm - Year of construction 2002

diameter: 150 mmheight: 80 mmcentre height: 105 mmweight of the machine ca.: 18 kgdimensions of the machine ca.: 300 x 80 x 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Guide channel in oil-damped design, - was attached to TRAUB mechanically - Installed guide channel D 28 mm - Material slider length N - max. bar length 3,200 mm - Centering device - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

0: 15000 kgheight: 790 - 1350 mmwidth: 1200 mmloading area: 1200 x 120 mmweight: 110 kgdimensions: 1400 x 800 x 790 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 125 mm

Machine vice ATS-125 Jaw width: 125 mm Jaw height: 46 mm Total height: 118 mm Spans: Pos. 1: 0-72 Item 2: 70-140 Item 3: 135-220 Clamping force : 35kN Weight: 34 kg

0: 5000 kgheight: 800 mmwidth: 1200 mmloading area: 1200 x 100 mmweight: 90 kgdimensions: 1200 x 800 x 800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 130 t

Machine vice ATS NC-130VH Year of construction 2023 Jaw width: 130 mm Jaw height: 55 mm max. wingspan inside: 220 mm max. wingspan outside: 380 mm with pull-down function Clamping force : 35kN Weight: 40 kg As good as new Delivery possible

range L-W-H: 1350 x 485 x 950 mmweight: 107 kg: 7 St.Tool trolley filled with:3 pcs. Different socket sets, double end wrench,Double ended ring spanners, wrenches, pliers different,Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.Tool Steel: Chrome Vanadium5 pcs. Drawers filled with tools2 pcs. Drawers emptyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 160 t

Machine vice ATS NC-160VH Year of construction 2024 Jaw width: 160 mm Jaw height: 58 mm max. span inside: 300 mm max. wingspan outside:480 mm with pull-down function Clamping force: 40kN Weight: 60 kg Delivery possible

length: 1695 mmwidth: 600 mmheight over floor: 870 mmweight: 95 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 t

Machine vice ATS NC-200VH Year of construction 2024 Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm max. wingspan inside: 330 mm max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 81 kg Delivery possible

range L-W-H: 790 x 460 x 960 mmweight: 70 kg: 7 St.Tool trolley with 7 drawers equipped with tools- The pull-out drawers are all ball-bearing.- The entire workshop trolley is lockable.- Drawer 11/4 premium ratchet.1/4 knee joint 45 mm.1/4 extension 100mm.1/4 socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm.1/4 long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm.3/8 premium ratchet.3/8 knee joint 55 mm.3/8 extension 150mm.3/8 socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm.3/8 long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm.1/2 premium ratchet.1/2 knee joint 75 mm.1/2 extension 125mm.1/2 Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm.1/2 Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm.- DRAWER 2Ring, ratchet and socket wrench set consisting of.Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm.- DRAWER  ...

4 clamping elements Int. Art. Ref. m3535 Manufacturer: Lenzkes Type 100-20 L AS GOOD AS NEW Were only stretched 1 x during photography work ! No machining. Location: 59425 Unna The article is welcome to be viewed. Parcel shipping for 12,-€ is possible. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and l ...

coolant tank: 16 lconnected load frequency: 230 VMotor capacity: 90 Wattweight of the machine ca.: 11 Kgdimensions: 380 x 250 x 380 mmComplete coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zero point clamping system Manufacturer: Vischer & Bolli VB tools Built: 2018 Condition: unused System consisting of: 1 piece Dock Lock steel closure plate Dimensions: 600x200x85/95 mm with 2 pieces DockLock SAFE20 built-in cylinder up to 12.5 KN per cylinder 10 Mounting holes for M16-Inbus 1 piece special base plate made of steel Dimensions: 800x250x76 mm 1 piece DEUX-MILL tensioner 1 piece special base plate made of aluminium Dimensions: 600x600x40 mm 5 pieces clamping bolt SAFE20 long with centering 10 pieces clamping bolt SAFE20 long without centering 5 pieces balancing clamping bolt SAFE20 long 1 piece hydraulic pump

thickness of jaw: 150 mmmax. clamping width: 190 mmweight of the machine ca.: 16,5 Kgdimensions: 420 x 155 x 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

To be sold on behalf of a customer. Condition new. 4. Axis for CNC machine to program via control. Hydraulic. Heavy-duty design

length: 1200 mmwidth: 600 mmheight: 865 mmheight over floor: 870 mmweight: 70 KgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electronic length stop BOMAR type ROLBO Useful length: 3000 mm Useful table width: 330 mm tAdjustable heigth from 500 mm to 1100 mm Total table length: 3450 mm 8 memory lengths possible Voltage: 220 V mono

range L-W-H: 1610 x 460 x 920 mmweight: 93,5 kg: 20 St.Workshop trolley with 20 pcs. Drawers and 40mm solid wood panelFixed ball bearing guides (double bearings), anti-slip mat in each compartment,Thick rubber top mat, central locking, 6 heavy duty wheels 125 mm.including 4 swivel castors with brakes, central locking for all drawers.Anti-slip mat in each compartment.Solid ball bearing guides for the drawers. (Double stored)All drawers can be opened 100%. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.