Yuvarlak tablolar

No. 4926: 1 gebr. NC Round Table Fabr. DECKEL, type 2238 002600, with axis card for dialog 4 Arb.-Ber.: Table 800 x 600 mm, Other: Table load approx. 250 kg Clamping - grooves 16H7 Weight approx. 280 kg Space requirement / transport dimension approx. 1100 x 750 mm

NC Rotary Table Manufacturer: Eimeldingen Table size: 1100 x 840mm Infinitely divisible Condition: As good as new About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Turntable Dimensions: 700 x 560 mm Diameter: 800 mm Condition: New (unused)

Round table with C-axis FKD 60, 6000, faceplate diameter capacity 200 to, speeds 60 with manual gearbox ZF, Masterslafeverspannung, 4 spindle motor Siemens 40 kW, speed 1 level 0-10 RPM, 420000 nm 2nd stage 0-60 speed rpm, 115000 NM, circulating oil lubrication system, hydrostatic storage, dimensions: length: 6900 mm, width: 6000 mm, height: 1200 mm, weight 80 t.

table diameter: 800 mmtable load: 6 ttable height: mmweight of the machine ca.: 950 kgNC rotary table make FIBROtype FIBROPLAN Ø 800 mm rotary table with increased geometric accuracywith 8 star-shaped T-slots 18H8 according to DIN650with centering hole Ø40H6mounting height 250mmtotal ratio 1:600direct measuring system ROD880C/36000weight approx. 950 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1250 mmwidth: 1250 mm: 1595 mm: 10 t: 290 mm: 2,0 t: 1,8 x 1,3 x 0,3 m- The round table comes from an exhibition and is new! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

table diameter: 500 mmtable load capacity: 420 kgtable height: 185 mmcentre height: 315 mmcenter hole: MK 5 mmindexing: 15 °weight: 275 kgdimensions of the machine ca.: 600 x 850 x 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Storage number: 3552 CNC ROTARY TABLE Manufacturer: HOFMANN, Type: RW-NC 220 Machines NR.: 02368 30JO2, built: 2009 Specifications: Table size 220 mm Center Height 220 Partial 0.001 Degree Control SIemens 840D Hori/Vertical Accessories: Riding stock - manual Length: 600 mm, Height: 800 mm, Width: 400 mm, Weight: 200 kg

Specifications: - Three-jaw chuck 300 mm - Chuck manually rotatable 360° - Division grid 24 - Peak height approx. 185 mm - Duchgang / passage 55 mm - Total depth without baking approx. 270 mm - Total depth with jaws approx. 310 mm - Flange plate horizontal W 300 x D 145 mm - Flange plate vertical W 300 x H 335 mm - Weight 100 Kg - Space requirement W 320 x D 310 x H 335 mm

table diameter: 600x400 mmtable height: x mmtable load: x twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mmtable height: 220 mmweight: 430 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 650 mm, 250 mm

Round Dividing Table Peiseler ATSP 630 Table size 650mm x 650mm Table height 250mm

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...

Motor-driven NC rotary table Induction via hirth toothing -> 360 teeth Manufacturer: Rückle Type: RGS 5 Clamping surface: 1200 mm x 1000 mm Clamping grooves: 5 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 100 H6 mm Condition: Very good (used) Optional with machine bed

Key data: 500 mm, 500 mm

Article number: 27-04-001 Manufacturer: Test Fuchs Mint condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 600x700x500mm Weight: approx. 200kg Rotary table diameter: approx. Ø 500mm Max. rotation range: 360 degrees Accessories  Partial setup (manual via handwheel with scale)  Mechanical table clamping  Clamping T-slots

Used rotary table Int. Art. Ref. m3469 Manufacturer: unknown Type: unknown Diameter 800 mm Height 230 mm Total weight approx. 600 kg Rotary table is air-assisted Item location: 589425 Unna The machine can be viewed and tried out. A forklift for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities. Company names and  ...

table length: . mmtable width: . mmtable load: . ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

Article number: 27-04-004 Manufacturer: Walter Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x400mm Weight: approx. 300kg Digital display: 1-axis digital display Heidenhain Encoder: Heidenhain Resolution: 0.001 degree Face plate diameter: approx. 400mm Clamping T-slots: 4 pieces of 14mm each Rod passage: approx. Ø 40mm Indexing: manual via handwheel Quick indexing: Electrically via shaft stump & e.g. cordless screwdriver Max.table load: Vertical: approx. 200kg Horizontal: approx. 500kg Accessories: Complete Instruction Manual Mechanical table clamping 1x ISO 40 tool holder Display Bracket Handwheel for indexing with extra-long shaft stump 2 pieces of eyebolts for lifting the table Other accessories on request Price and other technical data on request

Round table probably Walter with a diameter of 380 mm.