testere kullanılmış satılık (1,292)

Uzunluk 6 m E355 konumlandırıcı kontrolörü Testere çapı 420 mm

Uzunluk 5m Seçenekler: Yükle ve boşalt KESME ÜNITELERI EĞIMI IÇIN SANAL EKSEN PROFİL SIKIŞTIRMA ETIKET YAZICISI

cutting diameter: 360 mmsaw band length: 4870 x 41 x 1,3 mmcutting width: 360 mmcutting speed: 11 - 110 m/min: 4,0 kWheight of the workpiece: 800 mmweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,3 x 1,9 x 2,2 mAutomatic hydraulic band saw with- SIMATIC OP17 NC control- Single material feed 600 mm- Max. programmable length 6000 mm- Hydraulic saw blade tensioning (36–40 bar)- Motorized chip conveyor- Emergency stop device- infeed roller conveyor 4mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter:400 mmcutting diameter:400 mmmaterial:Vollmaterial 20 - 130 mmmaterial:Walzprofile 40 - 120 mmmaterial diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mmsawblade width:4 mmtotal power requirement:5,1 kWweight of the machine ca.:1850 kgdimensions of the machine ca.:3300 x 1630 x 1960 mmDocuments:vorhanden

Cutting height:150 mmsaw band length:2400 mmcutting width:350 mmtotal power requirement:380 Vweight of the machine ca.:350 kgdimensions of the machine ca.:800 x 950 x 1650 mm

saw blade diameter:400 mmtotal power requirement:380 V, 1,7/2,6 kWweight of the machine ca.:850 kgdimensions of the machine ca.:1100 x 1050 x 1620 mm

cutting diameter:260 mmband length:450 x 4 x2 mmtotal power requirement:22,6 kWweight of the machine ca.:1024 kgdimensions of the machine ca.:1500 x 2310 x 955 mmsquare:240 x 240 mmflat material:260 x 180 clamping capacity:40 barDocuments:vorhanden

saw blade diameter:400 mmtotal power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

total power requirement:380V 50 HZ,1,67 kWdimensions of the machine ca.:1,4 x 1,8 x 1,4 m

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200 x 88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,4 tdimensions: 1,2 x 0,9 x 1,5 mDisplay machine- Never used- 45° left/right miter- Head tilts up to 45° for bevel cuts (compound cuts)- Pneumatic dual quick-clamping system- Includes micro-spray system- Includes carbide saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m

Double Miter Band Saw -Mitre cuts up to 60° left and 45° right -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 235 mm Saw blade dimensions 2645 x 27 x 0.9 mm Cutting width 280 x 190 mm Cutting speed 45/90 m/min Cutting capacity at 60° round 120 mm Cutting capacity at 60° square 120 mm Cutting capacity at 45° Round 190 mm Cutting capacity at 45° square 170 mm Connection voltage 400 volts Total power requirement 1.1 kW Machine weight approx. 290 kg Dimensions L x W x H 1.2 x 0.8 x 1.2 m Auction-ID: A7-49782-586

Hydropneumatic semi-automatic - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Ball-bearing table - Pneumat. Double clamping device - Machine base with mist spraying device - Chip extraction nozzle on saw blade protective cover Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-49782-614

Cutting diameter 230 mm Cutting speed 35 - 70 m/min Cutting width 260 x 200 mm Saw blade length 2720 x 27 x 0.9 mm Total power requirement 1.1 kW Machine weight approx. 0.68 t Dimensions approx. 1.8 x 1.8 x 1.6 m Auction-ID: A7-49782-627

Auction-ID: A1-49846-380

Auction-ID: A1-49846-387

Portable and removable metal band saw HBM 1100 Watt This mobile band saw can also be used without a stand. Special features The powerful mobile band saw machine with 1100 watt motor can also be used separately for materials up to 127 x 127 mm. Including 2 saw blades, Work table and integrated LED lighting. Saw blade length 1140 mm with adjustable variable handle. Lightweight and handy. Ideal for universal construction work, for assembly, in the workshop or for private use. Saw size 1140 x 13 x 0.65 mm. Maximum cutting capacity 127 x 127 mm Cutting speed 144 m/min. Voltage 230 volts. Motor power 1100 watts. Package sizes 50 x 30 x 39 cm. Weight 15 kg. Condition: never used / new (5) Auction-ID: A7-49782-589

Hacksaw machine - with feed roller conveyor 1000mm - Preset counter - Mataria stop with trigger max. 600mm - Coolant device Cutting diameter 200 mm Saw blade length 350 mm Cutting range at 90 degrees: around 200 mm Total power requirement 3.0 kW Machine weight approx. 0.45 t Dimensions L x W x H 1.4 x 1.4 x 1.3 m Auction-ID: A7-49782-618

Manual Band Saw hydr. Saw blade tension hydr. Workpiece clamping hydr. Saw up/down incl. 4 spare saw blades Cutting diameter 420 mm Saw blade length 4870 mm Cutting width 500 x 250 mm Table height 640 mm Profile size - max. 400 x 400 mm Cutting speed 40 - 120 m/min Saw blade length 4870 x 27 x 0.9 mm Total power requirement 3.0 kW Machine weight approx. 0.75 t Space requirement approx. 2.0 x 1.0 x 1.5 m Auction-ID: A7-49782-655

Exhibition Machine - Never used - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Pneumatic double quick-release device - Incl. micro spray system - Incl. carbide saw blades Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting area at 90 degrees: flat 200 x 88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.4 t Dimensions L x W x H 1.2 x 0.9 x 1.5 m Auction-ID: A7-49782-576

Mounting band saw: Cutting range at 90 degrees: around 125 mm Cutting range at 90 degrees: square 125 mm Cutting area at 90 degrees: rectangle 127 x 125 mm Saw blade dimensions 1435 x 12.7 x 0.6 mm Belt speed 38 - 80 m/min Total power requirement 0.95 kW Machine weight approx. 18 kg Dimensions L x W x H 720 x 380 x 450 m Condition: never used / new (5) Auction-ID: A7-49782-617

Aluminum Circular Saw Machine - Discharge roller conveyor 4000mm with handwheel, Foldable stop and digital system - Feed roller conveyor 3500mm - Transport dimensions 6.0m x 2.0m x 1.6m Saw blade diameter 400 mm Cutting range at 90 degrees: around 130 mm Cutting range at 90 degrees: square 110 mm Cutting area at 90 degrees: flat 180 x 100 mm Saw blade speeds 3000 rpm Total power requirement 2.2 kW Machine weight approx. 0.51 t Dimensions L x W x H 3.8 x 1.6 x 1.7 m Auction-ID: A7-49782-648

Brand: Sueri Alfredo construzione Spa, Torino. 380V. Auction-ID: A1-49552-122

Cutting diameter 320 mm Saw blade length 4570 x 27 x 0.9 mm Table height mm Cutting width 450 x 280 mm Drive power 4.0 kW Cutting speed 15 - 105 m/min Motor 380 V Total power requirement 4.0 kW Machine weight approx. 0.8 t Space requirements approx. 1.8 x 0.8 x 1.2 m Condition: unchecked (6) Auction-ID: A7-49782-551

Stored in working condition, with 2 new band saws. Auction-ID: A3-46156-17117

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 €: 1096.2 €: Schwenkrahmen : 3120 x 27 x 0,9 mm: 15 - 101 m/min: 280 mm: 240 mm: 310 x 240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 5150 mm: 3200 mm: 1950 mm: 5000 x 2200 x 1900 mm: 2150 kgCNC control with 7", touchscreen for the following functions:Feed length, workpiece count, and automatic saw frame rotation for frame adjustmentAutomatic feed 3000 mm / strokeVariable cutting pressureMachine with infinitely variable speedCoolant systemMotorized chip brushChip conveyorAutomatic saw blade breakage monitoringHydraulic vicesRecommended max. diameter of solid material in automatic mode: 150 mmOperating manual in German or EnglishOPTIONS:Hydraulic bundle clamping device, micro-spray device, variable clamping pressure,10", s ...

: neu : 2026 : 060214 : prompt, Zwischenverkauf v : Türkei : 7700 €: 148.61 €: 1 : Schwenkrahmen : 2730x27x0,9 mm: 35/70 m/min: 230 mm: 230 mm: 320x130 mm: rund 210 mm, quadrat 190 : rund 130 mm, quadrat 100 : rund 180 mm, quadrat 150 : 805 mm: 0.37 kW: 1.3 kW: 0.12 kW: 1350 mm: 700 mm: 1300 mm: 430 kgswivel frameinfinitely adjustable lowering with hydraulic cylinderhydraulic lifting of the saw framemechanical vice with quick clampingcoolant equipmentmachine basechip collecting trayuser manual in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 €: 160.19 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1500 mm: 1400 mm: 1850 mm: 345 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 €: 200.83 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1600 mm: 1200 mm: 1800 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Option:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...