atık bertarafı ve geri dönüşümü için diğer makineler kullanılmış satılık

TECHNICAL SPECIFICATIONS Manafacture: COMAC Designation: Dust control system / nebulizer Type: Akkua Jet 65S Version: with 5 m articulated arm, on trailer Year of construction: 2012 Range: approx. 65 m (significantly more in the wind direction) Rotation: 0-360º (hydraulic) Vertical adjustment: -15°/+50° (hydraulic) Area coverage (theoretical): approx. 13,300 sqm Water consumption: from 1,500 to approx. 8,000 L/h Number of nozzle rings: 3 pcs. (separately switchable) Number of nozzles per wreath: 52 pcs. Total number of nozzles: 156 pcs. Fan power: 11.5 kW Water pump power: 4 kW Water filter: at 100 μm (stainless steel filter) Operating water pressure: approx. 15 - 22 bar Connection electrical: 400V/32A CEE Control voltage: 24 V Connection water: 1" F Average air velocity: approx. 38 m/s Air flow rate: approx. 30,000 cbm/h Degree of protection of the machine: IP ...

capacity in kVA: 10 kVAinput voltage: 400 Voutput voltage: 200 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: SALA Description: Lamella thickener Type. LT 200-F5 Year of construction: 1992 Total volume: 86.3 cbm Drive Unit Type: SFL 20040 Working torque: 20,000 Nm Shaft speed: 0.4 rpm Gearbox Type: S.O.M. Planetary Gearbox Sheet thickness tank: 6 mm Flocculator: STAMO AB Flocculator power: 1.1 kW

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

make: Ambra output: 75% mehr Zuzug des Mittel : alle Medien : Ölbinder Recyling-Pack The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

Motor power: 90kW, with control cabinet, the vertical crusher is located in an enclosure.

Drying centrifuge brand: viplat, length: 1.2 m, Ø: 0.5, grill: 3 mm, motor: 22 kw (30 hp) at 3,000 rpm and electrical panel.

Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.

Centrifuge: 1,200x550 mm. Engine: 15 hp.

Bale dimensions: 800x800mm, length: 8000mm, width: 6000mm, height: 5000mm.

Centrifuge Brand: Sion, model: 1400x700 mm Ø, motor: 55 Kw at 2960 rpm, year: 2009. No grill and no electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Max. bale dimensions: 700x490x730mm, bale weight: 40-60kg, length: 710mm, width: 1000mm, height: 1920mm, weight: 550kg.

Centrifuge: 1.2x0.55 Ø, motor: 30 Kw (40 hp). With pneumatic scraper for top cleaning. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

There are two shredders available, blade width: 3x 46mm, power: 30kW, machine 2 has a cracked casing and needs overhauling.

Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.

Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia.

Hydraulic guillotine shear: 1.870x1.070 mm, brand: Gester, model: TN-100, engine: 30 hp, 100 TN force.

Motor power: 55kW, length: 14,900mm, width: 6800mm, height: 4000mm, operational hours counter: 30h.

IFE Electric Magnetic Strap Brand: IFE Length frame A.A.= 2300 mm Belt width : 800 mm This magnet has 2 magnetic blocks; nr1= main magnetic block, type electro Block : L= 950 x W=900 x H=650 mm Power requirement : 3,5 kW nr2= auxiliary magnet block , type permanent Block : L= 550 x W=620 x H=190 mm Drive: 2 kW slip-on gearbox Included rectifiers.

With documentation and controls.

Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces

Connected load: 15.5kW, weight: 6.8t.

Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).

Weight: 5.65t.

LKoreman Permanent Magnet Strap (unused) Block : L= 1200 x W=850 x H=300 mm Length frame A.A.= 1900 mm Belt width : 800 mm Drive slip-on gearbox 1.5 kW Speed 1.6 m/sec

With conveyor belt, blower, shredder, screw, drum and screen.

Permanent Magnet Block (unused) Brand: LKoreman Block : length 1200mm, width 850mm, height 320mm. Heavy Duty In stock : 2 piece(s)

Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h.